I always come back to Mag 2C, My fav. form factor...
This beam shot is with the SMO/VLOP hybrid sputter reflector:
Specs:
(MOP, LOP or SMO/VLOP Hybrid Sputter)
http://www.candlepowerforums.com/vb/...d.php?t=307932
Price is $129. US only/PP only. (Include one reflector of choice, not including batteries cell extender shown in the photo)
PP goods fee/Shipping insurance: add $15
PP gift No fee, Shipping insurance: $10
I left the battery tube stock, it won't fit AW 26mm IMR, but there are many ways to run 2xLi-ion in a Mag 2C w/o bore out the tube, the light will Run on:
FMs Deep Wide mag C Tail CAP sold here: http://www.candlepowerforums.com/vb/...d.php?t=215997
This beam shot is with the SMO/VLOP hybrid sputter reflector:
Specs:
- Brand New Mag 2C in Titanium Grey/Gun Metal color
- Powered by 2x Li-ion.
- XML highest bin T6 with 1D tint on 14mm board from cutter electronics,
- The best tint in my eyes, right on the black locus, no green, no yellow, no blue, it's at the neutral end of the cool white.
- H22a P7 Alu. heat sink with top filed down flat for 14mm flat bottom star
- Arctic Silver thermo adhesive for star glue-down
- Arctic silver 5 thermo paste between heat sink Mag C tube for optimum heat transfer
- 22 AWG Silver Coated copper core Teflon Wires
- 6.6v-8.4v CC P7 driver delivering 2.5 Amp to the Led (This is Dx beefy 20330 driver, spec is 2.8A, Ive used two in parallel for SST-50 got 5Amp, one driver gives 2.5A).
- This is one of the rare events that I didn't over drive a led :devil: . This set-up all provide very long run time, about 3-4 hours if 2x Dx C-lions are used.
- 22AWG silver coated copper Teflon wires
(MOP, LOP or SMO/VLOP Hybrid Sputter)
http://www.candlepowerforums.com/vb/...d.php?t=307932
Price is $129. US only/PP only. (Include one reflector of choice, not including batteries cell extender shown in the photo)
PP goods fee/Shipping insurance: add $15
PP gift No fee, Shipping insurance: $10
I left the battery tube stock, it won't fit AW 26mm IMR, but there are many ways to run 2xLi-ion in a Mag 2C w/o bore out the tube, the light will Run on:
- 2x18500 protected Li-ion with a DIY PVC battery sleeve
- 2x18500 un protected Li-ion with a DIY battery sleeve
- 2x18650 protected Li-ion with download's Mag C Ring Kit
- 2x18650 AW IMR 18650 with recessed spring mod
- 2x18650 unprotected li-ion with recessed spring mod
- 2x DX 25500 C-lion, unprotected version (Not recommended)
- 2x AW old protected C-lion with an C-lion 10mm cell extender
- 2x DX 25500 C-lion, protected version with an AW C-lion 10mm cell extender (This is what's shown in the photo)
- 2x AW old protected C-lion with a FiveMega deep Wide SS Mag C tail Cap
- 2x DX 25500 C-lion, protected version with a FiveMega deep Wide SS Mag C tail Cap
FMs Deep Wide mag C Tail CAP sold here: http://www.candlepowerforums.com/vb/...d.php?t=215997
Last edited:
