• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Feeler - M3 & M6/ KT4 Stainless Bezel Rings

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
I wanted to put a feeler out there and see how many people would be interested in a stainless bezel ring for a M3 and M6/ KT4 head. The M6/ KT4 bezel ring will also fit all the other KT series heads.

They would be non crenulated, not polished and would not have notches like the factory rings.

I was also thinking about getting some coated in a Ti black finish. It would essentially be the same finish as the Xeno Ti black.

Please post what finish you would like and how many. The estimated prices are below. I don't see why the pricing would change but you never know. I only have a sample of the plain stainless finish. I do not have a sample of the Ti black.


I want to make it clear that these are stainless bezel rings. The Ti black version is just a coating. This may not be the final design. It may have a very slight change and if it does, it will be to the end (the part that does not screw into the head) of the bezel ring.


M3 stainless finish - $22.00 shipped in the US
M3 stainless black finish - $23.50 shipped in the US
M6/ KT4 stainless finish - $28.00 shipped in the US
M6/ KT4 stainless black finish - $29.50 shipped in the US

Shipping out of the US will be $1.50 extra per ring up to a certain weight.

All items will ship First Class Mail in a bubble mailer. Insurance will be additional and up to the buyer.




M3 Stainless Bezel Ring



2346696260048953316S600x600Q85.jpg








M6/ KT4 Stainless Bezel Ring



2537304610048953316S600x600Q85.jpg
 
Last edited:

nein166

Flashlight Enthusiast
Joined
Feb 16, 2006
Messages
1,575
Location
New York
Reconstruction of lost posts from google cache

Re:Feeler-M3& M6/ KT4 StainlessBezelRings

Written by dcaprilia on 02-17-2011 07:04 PM GMT

I would be in for for one of each in

M3 stainless Ti black - $23.50 shipped in the US

M6/ KT4 stainless Ti black - $29.50 shipped in the US
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by euroken on 02-17-2011 08:28 PM GMT

I would also be in for these one of each:

M3 stainless Ti black - $23.50 shipped in the US
M6/ KT4 stainless Ti black - $29.50 shipped in the US
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by Nitroz on 02-17-2011 08:48 PM GMT

Would you do some for the m2? I'm in for that if so.
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by QtrHorse on 02-17-2011 09:03 PM GMT

I would like to but it will not happen on this run. I am seriously considering it for a second run.

Nitroz said:
Would you do some for the m2? I'm in for that if so.
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by Nitroz on 02-17-2011 09:16 PM GMT

QtrHorse said:
I would like to but it will not happen on this run. I am seriously considering it for a second run.
Great, thanks! Great, thanks!
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by hron61 on 02-17-2011 11:01 PM GMT

sounds great, i'd be in for one...

M6/ KT4 stainless Ti black - $29.50 shipped in the US
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by UnderTheWeepingMoon on 02-18-2011 01:01 AM GMT

I'd be in for one M6/KT4 stainless finish, if international postage isn't too much extra.
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by QtrHorse on 02-18-2011 07:33 AM GMT

Non US shipments would need to add $1.50 per ring.

UnderTheWeepingMoon said:
I'd be in for one M6/KT4 stainless finish, if international postage isn't too much extra.
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by Steve in SoCal on 02-19-2011 02:12 PM GMT

I would also be in for one of each:

M3 stainless Ti black - $23.50 shipped in the US

M6/ KT4 stainless Ti black - $29.50 shipped in the US
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by euroken on 02-19-2011 02:24 PM GMT

I'll definitely be in for M2 bezels also!
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by rjr104 on 02-19-2011 02:31 PM GMT

M6/ KT4 stainless finish x 2

M6/ KT4 stainless black finish x 2

Sounds good to me.

RJ
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by maxspeeds on 02-19-2011 02:59 PM GMT

These look very similiar to NetKidz SS bezels:http://www.candlepowerforums.com/vb/...d.php?t=236071http://www.candlepowerforums.com/vb/...d.php?t=237408
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by QtrHorse on 02-19-2011 04:36 PM GMT

They are similar to Netkids bezels just like his are similar to the plain version that RPM made and Oveready's Triad tail cap is similar to RPM's SW01 clone.

I liked the look of Netkidz plain bezel so it was an inspiration you could say.

maxspeeds said:
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by maxspeeds on 02-19-2011 04:40 PM GMT

Then they will be pretty awesome. I have Netkidz bezels for both myM3 and KT2 and love them.
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by jkt on 02-20-2011 08:12 AM GMT

Hi,

I will buy five M3 stainless finish,and five KT4 stainless finish,thank you.

jkt
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by red_hackle on 02-20-2011 08:17 AM GMT

I'd like one black ring for theM3!
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by shao.fu.tzer on 02-20-2011 08:24 AM GMT

Please, make M2bezel rings!!!
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by Disintergrator66 on 02-21-2011 05:22 AM GMT

I'd be interested in a M6/ KT4 stainless black finish - $29.50 shipped in the US.

Too bad you didn't offer a crenulated model though. You probably couldnt keep them in stock! Hint Hint!

Thanks
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by jkt on 02-21-2011 06:25 AM GMT

shao.fu.tzer said:
Please, make M2 bezel rings!!!
I want M2 I want M2 bezel ring,too,i need ten rings.

jkt
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by nein166 on 02-23-2011 04:14 AM GMT

I like the simple design and would take 2 of theM3 version regardless of final color

A black finish will help reduce the glare and reflections
Re:Feeler-M3& M6/ KT4 StainlessBezelRings
Written by QtrHorse on 02-23-2011 07:50 AM GMT

I was surprised how many people would like a black version. If these are made, I will be getting both the plain stainless finish and the black version.

nein166 said:
I like the simple design and would take 2 of the M3 version regardless of final color

A black finish will help reduce the glare and reflections
 
Last edited:

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
Thank you very much nein166! I was about to do the same thing by quoting all the original post from Google cache.
 

nein166

Flashlight Enthusiast
Joined
Feb 16, 2006
Messages
1,575
Location
New York
As Qtrhorse stated in the original post there are not going to be notches on the inside
Get a strap wrench and git er done
 

417PC

Newly Enlightened
Joined
Oct 29, 2010
Messages
13
Location
Orange County
In case you change your mind:
I'd love two of them....but I'd want them to be big, pointy, and crenellated. YES I frequently hit people with my flashlight....and I plan to do so in the future.
 

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
To the top.

Still trying to get a feel to see if this will be worth the little investment.
 

nbjly

Enlightened
Joined
Dec 12, 2004
Messages
393
Is this still a possibility?

Instead of one each, I'd buy 3 M3 and 3 M6 all black, and even better would be M2 rings, I'd buy 5 black ones.
 

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
Yes, still a possibility.

I started working for a new company 3 months ago and have been traveling a lot. I should be home bound more often very soon and able to finish some projects.

I am actually considering the M2 bezels.
 

Disintergrator66

Newly Enlightened
Joined
Feb 28, 2010
Messages
75
Location
MA
Yes, still a possibility.

I started working for a new company 3 months ago and have been traveling a lot. I should be home bound more often very soon and able to finish some projects.

I am actually considering the M2 bezels.

Good to hear as I'm still interested. Thx!!!!!

 
Top