Sold/Expired Quad XP-G 5.6A 3-mode P60 module 6th Run *close*

:welcome:I sell this!

A new product!

5.6A 3-mode 3.7V Li-Io battery!
This module is most suitable for a large-capacity battery!

A small battery of the capacity.
When it is the low battery of the electric discharge rate, the module cannot output it.

The 6th run will be limited to 4.2mA 3-mode 5.6A 3-mode Direct Drive XP-G R4NW & R5CW
The sale number is 10 in all.

I begin to sell it for $190(5.6A 3-mode) 180(4.2A 3-mode) $160(Direct Drive) including the EMS postage!

The GITD(Ultra green/Ultra blue/Pure blue)processing is plus $10.

This becomes very hot.
The use battery is with 3.7V Li-Io battery protection circuit.
If a light becomes hot, please cut the light which is in a dangerous state.
Please be careful to the handling.
After understanding, please refer as things mentioned above.

This light creates excessive heat
The consecutive lighting is dangerous.
If a light is overheated, please turn off the light.
This light may cause eye damage
This light will burn the skin at close range.
This light may cause combustibles to ignite

:thumbsup:
I sell this custom Quad XP-G P60 module.

I begin to sell it for $160(DD) $180(4.2A 3-mode) $190(5.6A 3-mode)including the EMS postage!

This light creates excessive heat.
Please use 26650 or 26500 or 18650 or 17670 expensive battery of the electric discharge performance.

The payment is PeyPal.
Post your order here and I will PM you the total along with my PayPal address.

Cutter-XPG25RDR5-CW (remodeling board)


Original board


Carclo 24mm Quad Optics


Quad XP-G Module 5600mA 3-mode
*3 modes: Low-Med-High
* Voltage input: 3V - 5.5V
* The memory feature will memorize the last mode

Quad XP-G Module 4200mA 3-mode
*3 modes: Low-Med-High
* Voltage input: 3V - 5.5V
* The memory feature will memorize the last mode

Quad XP-G DD Module



surefire 6P C2 normal body FIVEMEGA 26500

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

5.6A 3-mode
1) erlon R4 3-mode Ultra blue GITD *Order Shipped*
2) WarriorOfLight R5 3-mode Pure blue GITD *Order Shipped*
3) doctor ladd R5 3-mode *Order Shipped*
4) fabienne 90CRI 3-mode Ultra blue GITD *Order Shipped*
5) WarriorOfLight 90CRI 3-mode Ultra blue GITD *Order Shipped*

4.2A 3-mode
1) luopo R5 3-mode green GITD *Order Shipped*
2) UnderTheWeepingMoon R4 3-mode green GITD *Order Shipped*
3) baldo21 R5 3-mode Pure blue GITD *Order Shipped*
4) GhostReaction R5 3-mode green GITD *Order Shipped*

2.8A 3-mode
1) calipsoii Nichia 119 3-mode Pure blue GITD *Order Shipped*

2.1A 3-mode
1) Lance Carbuncle Nichia 119 3-mode *Order Shipped*

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Hope you are okay- that was a massive earthquake

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Hey Kenji,

Same sentiments here, hope you and your family are all OK. First thing I though of when hearing of the quake was you.

Trusting that you're OK, just wanted to update you on my quad. It is now housed in a Solarforce L2X, with an IMR and zero resistance Moddoolar Triad tail with clip. It looks unreal (real mean, like it means business!), but the output is AWESOME!!! I just hope this combo is not cooking the drop-in, but for outright "light" all around, the output of this thing defies description. I now carry it everywhere.

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

bugsy714 said:

Hope you are okay- that was a massive earthquake

Click to expand...

warmurf said:

Hey Kenji,

Same sentiments here, hope you and your family are all OK. First thing I though of when hearing of the quake was you.

Trusting that you're OK, just wanted to update you on my quad. It is now housed in a Solarforce L2X, with an IMR and zero resistance Moddoolar Triad tail with clip. It looks unreal (real mean, like it means business!), but the output is AWESOME!!! I just hope this combo is not cooking the drop-in, but for outright "light" all around, the output of this thing defies description. I now carry it everywhere.

Click to expand...

Hi,

I am all right.
Thank you very much.:thanks:

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

kerberos0023 said:

Hi,

I am all right.
Thank you very much.:thanks:

Click to expand...

Glad to hear this!!!!!!!

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

I would like one 5.6A with GITD (pure blue I think). I think I would want a NW R4 but would like to know the color temperature and/or tint of both it and the CW if you know please. Also, what is the difference between ultra blue and pure blue? Will it fit the FM Copper 26650 and what other hosts are great fits.

Please also PM your PayPal address, total, how long for delivery to New Jersey, USA and anything else. I will send you a PM too JIC.

Thank you,

Pablo

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Disintergrator66 said:

Glad to hear this!!!!!!!

Click to expand...

Hi Disintergrator66,

Thank you very much.

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Kenji

Good to here that u r ok!

The higher amp drop in looks good

What are the output levels for the 5.6 at high-medium & low

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

paulsl said:

I would like one 5.6A with GITD (pure blue I think). I think I would want a NW R4 but would like to know the color temperature and/or tint of both it and the CW if you know please. Also, what is the difference between ultra blue and pure blue? Will it fit the FM Copper 26650 and what other hosts are great fits.

Please also PM your PayPal address, total, how long for delivery to New Jersey, USA and anything else. I will send you a PM too JIC.

Thank you,

Pablo

Click to expand...

Hi Pablo,

I sent PM!

Thanks,
Kenji

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

stoli67 said:

Kenji

Good to here that u r ok!

The higher amp drop in looks good

What are the output levels for the 5.6 at high-medium & low

Click to expand...

Hi stoli67,

The output value of each mode of the 5.6A module will measure it tomorrow. :thumbsup:

Thanks,
Kenji

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

kerberos0023 said:

Hi stoli67,

The output value of each mode of the 5.6A module will measure it tomorrow. :thumbsup:

Thanks,
Kenji

Click to expand...

Hi,

Can you give the values of the 4.2A also. Thanks!

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

thanks for that....

The DD is great but sometimes it would be good to use med and let it cool down!

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

tpetsch said:

Hi,

Can you give the values of the 4.2A also. Thanks!

Click to expand...

It is OK!

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Kenji,

with the DD I know I can't use an IMR cell so I guess that I am limited to an AW18650

Could I use an IMR 26650 or 32650 with the new 5.6 amp 3 mode drop in?

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

stoli67 said:

Kenji,

with the DD I know I can't use an IMR cell so I guess that I am limited to an AW18650

Could I use an IMR 26650 or 32650 with the new 5.6 amp 3 mode drop in?

Click to expand...

Yes,

4.6A module and 5.6A module can use IMR26650 and 32650.:thumbsup:

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Kenji, PM sent for a 4.2a 3 mode with the Green GITD. Thanks!

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

luopo said:

Kenji, PM sent for a 4.2a 3 mode with the Green GITD. Thanks!

Click to expand...

Hi luopo,

I sent PM!

Thanks,
Kenji

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Hi,

It is the current value that it measured by a clamp meter.
The use battery is AW IMR18650.
It is the measurement value in the module simple substance.

5.6A 3-mode
H : 5.37A
M : 1.44A
L : 0.19A

4.2A 3-mode
H : 4.14A
M : 1.26A
L : 0.17A

Re: Quad XP-G 5.6A 3-mode P60 module 6th Run

Hi luopo,

I received payment.

Thank you very much!
Kenji :wave: