Tritium inserts for Nitecore D11 slot?

iamasmith

Newly Enlightened
Joined
Mar 18, 2011
Messages
35
I stumbled across a thread or two where folks had used Tritium markers in their D11 piston slots.

This explains the mystery slot and why it looks like a well milled, over sized screwdriver slot :p

Does anybody know where I can get hold of one for my D11? and what's the normal procedure for fixing and filling the area?

Cheers,

Andy
 

boulder

Newly Enlightened
Joined
Nov 16, 2009
Messages
104
Location
USA
Go over to the Marketplace and look in the "WTS: Other Personal Type Lights"

Check out B@rt's thread for tritium vials.

And look for the thread selling Norland 61 optical adhesive. That's what you want to install your trit.
 

CarpentryHero

Flashlight Enthusiast
Joined
Jul 4, 2010
Messages
3,096
Location
Edmonton
If you already have the slot that's great, now all you need is to go to the CPF marketplace and get a 1.5 by 5.5 mm tritium vial, the (2mm by 10mm may fit) tell them what for, from Merkava or Bart in the other personal bst of the marketplace. You'll also need some norland epoxy, also sold there, I used a clear two part epoxy for mine from homedepot, but I'm good with epoxies and knew it'd work.
 
Top