dyson72
Newly Enlightened
Since some of you asked me to sell these, I'm now going to produce and sell these bezel if there are more than ten people interested. Because otherwise it make no sense for me to write the program for the cnc lathe and the cost for the anodizing would be way too high.
Anyway the nearest date i can lathe them is end of may, since until then the cnc lathe is already in use, but I recommend to register by now, so i can order the material.
These bezel are made of aluminum and anodized in matt black.
If you want other colors you can contact me and I'll see what I can do for you.
They will work for any MAG-LITE C- and D-Head while using an aspheric lens with a bottom glass thickness of 2 - 3mm.
Tested with:
Dealextreme SKU 12834
Dealextreme SKU 44653
The bezel comes with O-ring to keep the lens securely in place and to seal the light.
Here are the specs:
- Total height: 30mm
- Bezel adds 13mm of height compared to stock Face Cap
- Outer diameter 56,8mm
- Maximum height of aspheric lens ~22mm
Price:
- Standard matt black anodized bezel: 30€
- Other colors (red, blue, titan, orange, gold): just ask me, since i have to quote the price for anodizing a little number of parts
Shipping:
- international: 3,45€
- international registered : 5,50€
If you want to order more than one, ask me for shipping cost.
Because there is not enough interest I will not go into production.
Greetings from Germany,
Patrick
Anyway the nearest date i can lathe them is end of may, since until then the cnc lathe is already in use, but I recommend to register by now, so i can order the material.
These bezel are made of aluminum and anodized in matt black.
If you want other colors you can contact me and I'll see what I can do for you.
They will work for any MAG-LITE C- and D-Head while using an aspheric lens with a bottom glass thickness of 2 - 3mm.
Tested with:
Dealextreme SKU 12834
Dealextreme SKU 44653
The bezel comes with O-ring to keep the lens securely in place and to seal the light.
Here are the specs:
- Total height: 30mm
- Bezel adds 13mm of height compared to stock Face Cap
- Outer diameter 56,8mm
- Maximum height of aspheric lens ~22mm
Price:
- Standard matt black anodized bezel: 30€
- Other colors (red, blue, titan, orange, gold): just ask me, since i have to quote the price for anodizing a little number of parts
Shipping:
- international: 3,45€
- international registered : 5,50€
If you want to order more than one, ask me for shipping cost.
Because there is not enough interest I will not go into production.
Greetings from Germany,
Patrick
Last edited: