NITECORE -- Keep Innovating        
Results 1 to 26 of 26

Thread: 1200L 5 Cree 2" E2 Head By FiveMega

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default 1200L 5 Cree 2" E2 Head By FiveMega

    (AVAILABLE)

    Please allow 7 days to ship


    Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
    All these information will be next to your CPF handle in this post.
    All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.



    Top: Gray 2x18650 "E" body + Gray flutted M*g "C" head
    Mid Section: SS E body + nickel plated finned conical M*g "C" head.
    Bottom: Black 2x18650 "E" body + black finned/flutted M*g "C" head.
    Right side: Modified 5 Cree reflector assembly.
    Lower right: Adapter with 2 O'rings.

    Please read carefully before ordering

    After long wait, limited quantity of these 2" turbo heads are available for $urefire "E" bodies.
    Single mode 1200 Lumens DX 5 Cree lamp reflector assembly is machined (modified) to fit in your M*g "C" head then using provided adapter, your E seies body will fit into your M*g "C" head. Adapter is bare aluminum and can hardly seen when installed.
    There is no further modification needed, no tool or special skill needed.
    Result will be much brighter long throw with smaller but bright hot sopot.
    Will work with single cell (3.7 volt) with excellent efficiency (long run) and really bright but 2 cells (8.4 V maximum) will produce ultimate brightness.
    No flashlight body, tail cap, switch, head, lens or batteries included.
    What you get is modified turbo 5 Cree LED/reflector assembly and adapter with 2 installed, o'rings.
    Will fit all $urefire "E" bodies without pocket clip.
    Excellent choice when used with:

    E2 Body

    SS Body

    TS SS E Body

    E head, C tail body

    Double Head E Body
    No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
    Please don't pay if you may change your mind.
    It is
    ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is
    ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is
    ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
    Please do not send payment without above information
    Example:
    Mr Efire for #95 5 Cree "E" kit
    Price:
    Cash Paypal $39
    Please add 4% Paypal fee when paying from CC
    Shipping to States $6 for 1st kit or $8 for 2 kits
    Internationally $12 any quantity
    Aluminum adapter without module $14 shipped anywehere
    Please add 4% Paypal fee
    Paypal:
    fivemega@aol.com
    Please PM for postal money order payment method.
    Any comment welcome.

    ----------------------------
    #01 E kit 5 Cree tjhabak paid shipped 03103490000027889934
    #02 E kit 5 Cree addictedmatt paid shipped 03112550000057986972
    #03 E kit 5 Cree jwyj paid shipped CW203425985US
    #04 E kit 5 Cree FatRat paid shipped 23082940000002466596
    #05 E kit 5 Cree FatRat paid shipped 23082940000002466596
    #06 E kit 5 Cree euroken paid shipped 9505510489373189446663
    #07 E kit 5 Cree jonwkng paid shipped LC105690852US
    #08 E kit 5 Cree non CPF paid shipped

    #09 E kit 5 Cree (AVAILABLE)
    #10 E kit 5 Cree (AVAILABLE)
    #11 E kit 5 Cree (AVAILABLE)
    #12 E kit 5 Cree (AVAILABLE)
    #14 E kit 5 Cree (AVAILABLE)
    #15 E kit 5 Cree (AVAILABLE)
    #16 E kit 5 Cree (AVAILABLE)

    ---------------------------
    #01 Aluminum adapter without module aeroflash paid shipped
    #02 Aluminum adapter without module (AVAILABLE)
    #03 Aluminum adapter without module (AVAILABLE)

    ---------------------------
    Please find link of my other products here and click on each link you are interested on.
    ---------------------------
    (A V A I L A B L E)
    Last edited by fivemega; 07-23-2020 at 11:03 PM.

  2. #2
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    ***Question?***
    Quote Originally Posted by luopo View Post
    What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
    Shipping for SS body will be free when purchased with above kit.
    Pictured heads are custom modified but any M*g "C" head (C+serial number) will work.

    ==============
    Quote Originally Posted by maxspeeds View Post
    How well balanced is this setup with that mag head on the e body?
    Similar to $urefire M4
    ==============
    Quote Originally Posted by thundertree View Post
    Is there any way, maybe by using a different adapter, or combination of adapters, to have this drop-in fit a "C" body?
    It is possible to make such an adapter. However, these modules need 6~8.4 volt.
    ==============
    Quote Originally Posted by ma tumba View Post
    With this adapter alone, can I use a stock C-mag head with its reflector and stock maglite bulbs with a e-series body?
    With this adapter alone, you can use a stock C-Mag head with its camless reflector.
    Stock maglite PR bulb is sitting on a M*g C switch and it won't fit inside e-series body.
    What is your plan? Maybe I can help.
    Last edited by fivemega; 10-18-2020 at 01:21 AM.

  3. #3

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
    Last edited by luopo; 06-19-2011 at 06:35 PM.

  4. #4
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    Quote Originally Posted by luopo View Post
    What would shipping be if I buy your SS body at the same time? And where can I get the head that's in your pic above? Thanks!
    Shipping for SS body will be free when purchased with above kit.
    Pictured heads are custom modified but any M*g "C" head (C+serial number) will work.

  5. #5
    Flashaholic* maxspeeds's Avatar
    Join Date
    Jan 2007
    Location
    Oahu, Hawaii
    Posts
    2,157

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    How well balanced is this setup with that mag head on the e body?
    Cheers from the McGizmo state.

  6. #6
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    Quote Originally Posted by maxspeeds View Post
    How well balanced is this setup with that mag head on the e body?
    Similar to $urefire M4

  7. #7
    Flashaholic
    Join Date
    Mar 2011
    Location
    Ohio, USA
    Posts
    314

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    pp sent for #01 E Kit 5 Cree
    59.00
    2.36 4%PP
    6.00 shipping
    TOTAL 67.36

  8. #8

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    Is there any way, maybe by using a different adapter, or combination of adapters, to have this drop-in fit a "C" body?

    Much thanks!

  9. #9
    Flashaholic* addictedmatt's Avatar
    Join Date
    Feb 2007
    Location
    Syracuse, New York
    Posts
    712

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    I will take the next available.


  10. #10
    Flashaholic* addictedmatt's Avatar
    Join Date
    Feb 2007
    Location
    Syracuse, New York
    Posts
    712

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    PayPal sent for #02 E kit 5 Cree (AVAILABLE)


  11. #11
    Flashaholic jwyj's Avatar
    Join Date
    Sep 2009
    Location
    Malaysia
    Posts
    319

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega


    #03 E kit 5 Cree (AVAILABLE)
    Walk while you have the light, before darkness overtakes you.

  12. #12
    Flashaholic
    Join Date
    Aug 2010
    Location
    SW Florida
    Posts
    165

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    Paypal Sent!!

    #75 Scalloped W/D tail cap (AVAILABLE) $24
    #50 Scalloped SS tail cap (AVAILABLE) $18
    #04 E kit 5 Cree (AVAILABLE) $39.00
    #05 E kit 5 Cree (AVAILABLE) $39.00
    #33 SS 18650 E Body $68 (AVAILABLE)
    Extra replacement McClicky switch $10 (AVAILABLE)
    2 Extra replacement switch seal $1 (AVAILABLE)
    total=200.00-3o%=$140.00
    shipping=19.50
    ins=$5.20
    total=164.70 + 4%=$171.28 Thank You!

  13. #13
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    More kits for E bodies available.

  14. #14

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    *****PalPay sent******

    #01 Aluminum adapter without module

  15. #15

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    And thanks for all the most innovative stuff in the business !!

  16. #16

    Join Date
    Dec 2008
    Location
    Washington
    Posts
    1,486

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    PP sent for:

    #06 E kit 5 Cree (AVAILABLE)


    $39 - 20% discount = 31.2 * 1.04 (fees as indicated on the thread) = $32.45


    Please ship with my sleeves on my previous order!


    #01 "C" 26 ... 19 ... 50mm $5 (AVAILABLE)


    #03 "C" 26 ... 19 ... 100mm $6 (AVAILABLE)
    #04 "C" 26 ... 19 ... 100mm $6 (AVAILABLE)

  17. #17
    Flashaholic* jonwkng's Avatar
    Join Date
    Jun 2013
    Location
    Singapore
    Posts
    1,994

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    for:-

    #07 E kit 5 Cree (AVAILABLE) -> $31.20 (20% off) + International Shipping $12

    Thank you!

  18. #18
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    More kits for E bodies available.

  19. #19
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    A B

    A B

    A B

  20. #20
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    More kits for E bodies available.

  21. #21
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    A B

    A B

    A B

  22. #22
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    A B

    A B

    A B

  23. #23
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    More kits for E bodies available.

  24. #24
    Flashaholic*
    Join Date
    Oct 2013
    Location
    Russia
    Posts
    1,244

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    With this adapter alone, can I use a stock C-mag head with its reflector and stock maglite bulbs with a e-series body?

  25. #25
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,878

    Default Re: 1200L 5 Cree 2" E2 Head By FiveMega

    Quote Originally Posted by ma tumba View Post
    With this adapter alone, can I use a stock C-mag head with its reflector and stock maglite bulbs with a e-series body?

    With this adapter alone, you can use a stock C-Mag head with its camless reflector.
    Stock maglite PR bulb is sitting on a M*g C switch and it won't fit inside e-series body.
    What is your plan? Maybe I can help.

  26. #26
    Flashaholic*
    Join Date
    Oct 2013
    Location
    Russia
    Posts
    1,244

    Default 1200L 5 Cree 2" E2 Head By FiveMega

    Quote Originally Posted by fivemega View Post
    With this adapter alone, you can use a stock C-Mag head with its camless reflector.
    Stock maglite PR bulb is sitting on a M*g C switch and it won't fit inside e-series body.
    What is your plan? Maybe I can help.
    I just wanted to have a serious turbo head for incand bulbs and various e-series bodies that I have.
    Last edited by ma tumba; 10-21-2020 at 04:17 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •