ledcarry
Enlightened
Up for sale are three highly collectable EDC Titanium AA size lights. The following lights are offered for purchase through Paypal only. If using a non funded Paypal account or CC please add 4% to the purchase price. Price does not include international fees or the cost of shipping and must be added to the sale price. Insurance is highly recommended and seller cannot be held responsible for the light once it has left seller possession. Please PM me with any questions and help determining the final price to your location. The first "I'll Take It" and prompt payment gets the light. Sorry no trades or lower offers. Prices are firm and thanks for looking.
Light #1:
JHanko Titanium Nitecore D10 3D (Light pictured on left is Sold)
This JHanko 3D light was built in October of 2009 and has 14 blue tritium vials, 8 in the body and 6 in the unique 3D tail. It is made out of 100% 6AL-4V titanium and has a XP-E R2 neutral LED with ramping interface light engine. This light will except Alkaline, NiMh, and 14500 Li-Ion batteries, where Li-Ion power will give you the highest output. This light has never been carried and only tested a couple of times. It is a shelf queen light in perfect condition. Price $550.00
Below is the original JHanko 3D light introduction thread:
http://www.candlepowerforums.com/vb/showthread.php?237546-Introducing-3D-tritium...&highlight=JHanko+D10
Light #2
JHanko Titanium Nitecore D10 (Light pictured on right is Sold)
This JHanko light was built in March of 2009 to the best of my knowledge and has 10 blue tritium vials, 9 in the body and 1 in the PD tail. It is also made out of 100% 6AL-4Vtitanium and has a XP-E R2 neutral LED. It also has the ramping interface light engine. This light will also except Alkaline, NiMh, and 14500 Li-Ion batteries, where Li-Ion power provides the highest output. This light is another non-used, never carried shelf queen piece and is also in perfect condition. Another unique, and one of a kind collector light. Price $460.00
Light #3
KuKu Custom AnnoVolere AA with Clip (Light did not sell)
This nicely designed light is made of 6A/4V titanium alloy and has amazing cut knurling in sections around the handle. This light has a Cree XP-G R5 cool white LED, with a 3-mode driver, high = 1amp, medium = 300ma, low = 60ma. The switch in this light is not a PD but rather a very nice electronic button for limited resistance and improved smooth operation over PD. CPF light builder Sabrewolf acquired this light and applied a very cool bluish green and purple anodization to the entire body and clip. To finish off the color scheme, green glow was added around the LED and a blue tritium vial installed in the tail. This light has no laser markings or serial number, making this piece a truly "one of a kind". This light will except Alkaline, NiMh, and 14500 Li-Ion batteries. This light has been in storage, never carried or used and is in perfect condition. Great collector light! Below are the Sabrewolf and KuKu Volere original sales thread have great pics too.
Price $310.00
Sabrewolf sale thread:
http://www.candlepowerforums.com/vb/showthread.php?299212-SOLD-Custom-Anno-Volere-AA-with-Clip-SOLD&highlight=volere
KuKu427 sale thread:
http://www.cpfmarketplace.com/mp/showthread.php?225118-Volere-AA-14500-**XP-G-R5-Cool-vs.-XP-G-R4-Neutral-Beamshots**
Light #1:
JHanko Titanium Nitecore D10 3D (Light pictured on left is Sold)
This JHanko 3D light was built in October of 2009 and has 14 blue tritium vials, 8 in the body and 6 in the unique 3D tail. It is made out of 100% 6AL-4V titanium and has a XP-E R2 neutral LED with ramping interface light engine. This light will except Alkaline, NiMh, and 14500 Li-Ion batteries, where Li-Ion power will give you the highest output. This light has never been carried and only tested a couple of times. It is a shelf queen light in perfect condition. Price $550.00
Below is the original JHanko 3D light introduction thread:
http://www.candlepowerforums.com/vb/showthread.php?237546-Introducing-3D-tritium...&highlight=JHanko+D10
Light #2
JHanko Titanium Nitecore D10 (Light pictured on right is Sold)
This JHanko light was built in March of 2009 to the best of my knowledge and has 10 blue tritium vials, 9 in the body and 1 in the PD tail. It is also made out of 100% 6AL-4Vtitanium and has a XP-E R2 neutral LED. It also has the ramping interface light engine. This light will also except Alkaline, NiMh, and 14500 Li-Ion batteries, where Li-Ion power provides the highest output. This light is another non-used, never carried shelf queen piece and is also in perfect condition. Another unique, and one of a kind collector light. Price $460.00
Light #3
KuKu Custom AnnoVolere AA with Clip (Light did not sell)
This nicely designed light is made of 6A/4V titanium alloy and has amazing cut knurling in sections around the handle. This light has a Cree XP-G R5 cool white LED, with a 3-mode driver, high = 1amp, medium = 300ma, low = 60ma. The switch in this light is not a PD but rather a very nice electronic button for limited resistance and improved smooth operation over PD. CPF light builder Sabrewolf acquired this light and applied a very cool bluish green and purple anodization to the entire body and clip. To finish off the color scheme, green glow was added around the LED and a blue tritium vial installed in the tail. This light has no laser markings or serial number, making this piece a truly "one of a kind". This light will except Alkaline, NiMh, and 14500 Li-Ion batteries. This light has been in storage, never carried or used and is in perfect condition. Great collector light! Below are the Sabrewolf and KuKu Volere original sales thread have great pics too.
Price $310.00
Sabrewolf sale thread:
http://www.candlepowerforums.com/vb/showthread.php?299212-SOLD-Custom-Anno-Volere-AA-with-Clip-SOLD&highlight=volere
KuKu427 sale thread:
http://www.cpfmarketplace.com/mp/showthread.php?225118-Volere-AA-14500-**XP-G-R5-Cool-vs.-XP-G-R4-Neutral-Beamshots**
Last edited:
