abarth_1200
Flashlight Enthusiast
Anyone pulled it off, Im wanting to buy a couple of E01 and change them up a bit, maybe a blue one and a red one, also like the sound of a UV one.
Im not sure if its a straight forward desolder and solder in a new LED , Im not at all clued up on forward voltage and input current going to x driver etc.
Where should I look for LEDs, what brand, voltage, brightness?
Would this UV LED be a good place to start http://www.ledsupply.com/l7-0-u5th15-1.php See I notice it has a voltage 3.6V but my AAA battery outputs 1.5V less if I run nimh.
Help guys.
Or if there are any better UV torches for less than a couple of bucks with decent wavelength UV leds in them (<375nm +- 10nm)
Im not sure if its a straight forward desolder and solder in a new LED , Im not at all clued up on forward voltage and input current going to x driver etc.
Where should I look for LEDs, what brand, voltage, brightness?
Would this UV LED be a good place to start http://www.ledsupply.com/l7-0-u5th15-1.php See I notice it has a voltage 3.6V but my AAA battery outputs 1.5V less if I run nimh.
Help guys.
Or if there are any better UV torches for less than a couple of bucks with decent wavelength UV leds in them (<375nm +- 10nm)