Imalent        
Results 1 to 15 of 15

Thread: ***SOLD***: XML King Of Throw

  1. #1
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Party ***SOLD***: XML King Of Throw


    ---I have temporarily quit flashlight modding due to job change & re-location.
    My mods were all one of a kind, hand made creations where I enjoy seeking extreme, over the top creations.---You can see my past mods by clicking on my signature.


    ----check out my 6.1 million lux@ 1 meter tricked out Maxa Beam FS here:
    http://www.cpfmarketplace.com/mp/sho...y-light-weight
    .


    A light that I never intended to sell when I made it. the amound of work went into it was insane. Read the build thread below. Only one was ever made.

    It's the current ringing champion of throw on CPF reflector based flashlight.


    It'll out throw SR90 & TK70, both lights are 3-4 times bigger & heavier.
    Please do not insult me by comparing throw of this light to SR91, RRT-3, Catapalt, Vera2000, S12, S18, X10, M3LT, UB3T, M6LT etc., etc.

    This light is measued at 127,000 lux @ 1 meter, the highest reflector based led flashlight lux on CPF that I know of.

    This light has 3 modes, low med Hi: Driver is 2.8A 7135 shinning beam driver +1.4A slave, so 12x7135 total, Hi is 4.2A.

    see the original build thread here:
    http://www.candlepowerforums.com/vb/...00-lux-1-meter
    Selling $495 Net to me. . Reduced to $445 Net
    IMR 26650 4000mah cell included.





    .
    Last edited by ma_sha1; 10-14-2011 at 11:37 AM.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  2. #2
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: FS: XML King Of Throw

    bump...
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  3. #3
    Flashaholic
    Join Date
    Aug 2006
    Location
    Nebraska
    Posts
    288

    Default Re: FS: XML King Of Throw

    ---I have temporarily quid flashlight modding due to job change & re-location.
    I sure hope "Temporarily" is the operative word here ma sha1. Your creations are an inspiration to all us lumen junkies. I wish you good success with your new job and location!

  4. #4
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: FS: XML King Of Throw

    Thanks for your kind words!
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  5. #5
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: FS: XML King Of Throw

    This light has 3 modes, low med Hi, driver is 2.8A 7135 shinning beam driver +1.4A slave, Hi is 4.2A.

    What's not shown is that I installed a copper ring in the place where the rubber O-ring is shown in the pic,
    on the neck section, outside. Its even better looking than the picture. It's non functional, just for the looks.
    Last edited by ma_sha1; 10-11-2011 at 09:48 AM.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  6. #6
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: FS: XML King Of Throw

    bump..
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  7. #7

    Default Re: ***Reduced***: XML King Of Throw

    I WANT! (and have paypal ready)
    note: Just joined CPF and this is first post so there's no tellin' how soon you'll see this. (to prevent spam, it needs to be seen by moderator first) Am also trying to get ahold of you thru ebay & your paypal addy (is kaput?).

  8. #8
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: ***Reduced***: XML King Of Throw

    Sorry, Old One,

    This light just went SPF to gary123 by PM. I'll put you in for back-up.

    Thanks
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  9. #9
    Flashaholic*
    Join Date
    Jan 2007
    Location
    Washington DC area
    Posts
    856

    Default Re: ***Reduced***: XML King Of Throw

    Paypal is sent Ma.

    Old One: I don't know if you're aware that with a Li ion 26650, not only do you need a charger for Li ion batteries, but because most chargers will not take a 26650 battery, you would need to make or buy an adapter for the charger. You also would likely not want an inexpensive charger. There have been reports of Li ion batteries exploding from improper charging and use (there are numerous threads in CPF about this) and a 26650 is a big one. This would be a fair amount to take on as a first light. You may have been up to the task and may even have all the equipment - I just offer this up.
    Last edited by Gary123; 10-14-2011 at 12:05 PM.
    Brass Dragonheart, JHanko D10 17 trits, 2C Flex Dragon w/Aleph 3 Milky MCE, Mac 4Rebel Aleph custom, Ti Gatlight, 3xP7 LZ Megalennium, TNC aspheric, MC-E Gotham w/optic, Extreme Micro, BB Haiku XP-G, Kuku Volere & D10, Drake, FM 26650 w/ copper VIDSM quad

  10. #10
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: ***Reduced***: XML King Of Throw

    **SOLD**

    Thanks Gary, I have my own modified 26650 charger.
    The battery included is batteryspace's orange 26650 4000mah IMR, safer than regular Li-ion.
    But still, the more careful the better when charging. I am glad to see you are up to task with battery safety.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  11. #11
    Flashaholic*
    Join Date
    Jan 2007
    Location
    Washington DC area
    Posts
    856

    Default Re: ***Reduced***: XML King Of Throw

    Just received this. My god. This is more than a beast, its scary. It makes my throwers look like short range flood lights. There is no comparison. The only thing I can say for my throwers - they'll fit in a coat pocket.
    Brass Dragonheart, JHanko D10 17 trits, 2C Flex Dragon w/Aleph 3 Milky MCE, Mac 4Rebel Aleph custom, Ti Gatlight, 3xP7 LZ Megalennium, TNC aspheric, MC-E Gotham w/optic, Extreme Micro, BB Haiku XP-G, Kuku Volere & D10, Drake, FM 26650 w/ copper VIDSM quad

  12. #12
    Flashaholic* las3r's Avatar
    Join Date
    Jan 2009
    Location
    ohio
    Posts
    627

    Default Re: ***Reduced***: XML King Of Throw

    post some beam shots

  13. #13
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: ***Reduced***: XML King Of Throw

    Gary is going to do a shoot out of 4 throwers, can't wait to see...
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  14. #14

    Default Re: ***SOLD***: XML King Of Throw

    Quote Originally Posted by ma_sha1 View Post

    ---I have temporarily quit flashlight modding due to job change & re-location.
    Like Quest4fire said, hope your absence isn't for long. I always enjoyed checking out your many and varied builds. Good luck with the new job.


  15. #15
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,042

    Default Re: ***SOLD***: XML King Of Throw

    Quote Originally Posted by Al Combs View Post
    Like Quest4fire said, hope your absence isn't for long. I always enjoyed checking out your many and varied builds. Good luck with the new job.
    Thanks for the support. The time off from the hobby is killing me.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •