The Fenix-Store        
Results 1 to 16 of 16

Thread: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

  1. #1

    Default WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I'm having a local machinist make a Titanium AA/17500 extension for a TCR2. It will look like the aluminum version, except it will be 17.5mm internal diameter. However, mine would need to be bored a bit to use 17500's, I only have one that will fit.

    If anyone else wants one, let me know - Projected price is $45, he wants to get started in two weeks.

    Here's what it will look like, but the threads on the adapter are too square in profile to fit the Ti body, so it is not assembled.

    The Ti version will allow the head to screw in just a bit more, and the thread profile will match the Ti body.



    I don't know about polishing or other finishing yet. I think they would match well if the ribs and other high spots were polished. I'm meeting with him next week to give him a TCR2 to use. I'll have more details, and news about tail caps, then. Keep in mind that this is a custom project so it's likely there will be problems and delays. It will be prepay but only after a finished prototype is made. Then we can place an order. They will be made here in Georgia, USA.

    If you are wondering, the clip is from a D10 with longer screws from Ace hardware, the I think the chrome matches much better -

    Next is a Ti/Trit tail cap TCR2
    Last edited by nbjly; 11-23-2011 at 03:37 PM.

  2. #2

    Join Date
    Dec 2008
    Location
    Washington
    Posts
    1,112

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I'm interested in one for $45.

    Of course for Ti/Trit TC also.
    Last edited by euroken; 11-21-2011 at 05:10 PM.

  3. #3

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I'm in....

  4. #4

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Any mockup images of what the final design will look like?

  5. #5
    Flashaholic exquzmwa's Avatar
    Join Date
    Jul 2011
    Location
    Colorado, USA
    Posts
    379

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Quote Originally Posted by calipsoii View Post
    Any mockup images of what the final design will look like?
    +1 - I might be interested. Trit tailcap also sounds interesting

  6. #6
    Flashaholic* Morelite's Avatar
    Join Date
    Nov 2005
    Location
    Central PA
    Posts
    2,241

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I'm interested in both.

  7. #7
    Flashaholic* Incidentalist's Avatar
    Join Date
    Jun 2008
    Location
    St. Louis
    Posts
    571

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I would be interested depending on what they look like. Tail cap as well.

  8. #8
    Flashaholic* egrep's Avatar
    Join Date
    Apr 2011
    Location
    right here
    Posts
    629

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Are these going to be U.S. made or overseas?
    Last edited by egrep; 11-22-2011 at 01:05 AM.

  9. #9

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    More info

  10. #10

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Anyone else? I was hoping for at least ten people?

  11. #11
    *Flashaholic* fyrstormer's Avatar
    Join Date
    Jul 2009
    Location
    Maryland, Near DC, USA
    Posts
    6,388

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Just found this thread. I can't say I'd have much use for an AA extension, but a titanium button would be nice. I'd actually be in the market for 2-3 titanium buttons if the design is good. Is this a dead project at this point, or is there still some chance of getting parts made?

  12. #12
    Flashaholic jake royston's Avatar
    Join Date
    Apr 2010
    Location
    Santa Clarita, CA
    Posts
    373

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    if i ever find one, id be in for a button

  13. #13

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Project is not dead, but in suspended animation...other projects have taken precedence, but with sufficient demand it can be done.

  14. #14
    Flashaholic
    Join Date
    Apr 2010
    Location
    Wollongong, Australia
    Posts
    302

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    I will take one that works with a 17500/AA.

  15. #15
    *Flashaholic* fyrstormer's Avatar
    Join Date
    Jul 2009
    Location
    Maryland, Near DC, USA
    Posts
    6,388

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Quote Originally Posted by nbjly View Post
    Project is not dead, but in suspended animation...other projects have taken precedence, but with sufficient demand it can be done.
    Maybe start a sign-up list for each part you'd be offering?

  16. #16
    Unenlightened *parallax*'s Avatar
    Join Date
    Aug 2011
    Location
    Huntington, NY
    Posts
    17

    Default Re: WTS Titanium AA/17500 Extensions For Jetbeam TCR2

    Definitely in for a trit tailcap if they are going to be made

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •