Noob Question about buckpuck

Alarus · Dec 1, 2011

I have a noob question about the use of buckpuck.
How do I hook up an AC/DC supply to the buckpuck after i attach a harnass to it ?
There are only two wires dangling out.
I am looking at hooking up a 21V, 3A output from an adaptor.

I know this is a very basic question but i really need help as to what equipements to procure.

evilc66 · Dec 2, 2011

Which Buckpuck model are you looking at/using? There at a minimum should be four wires coming from the Buckpuck; two for incoming power, and two for LED connection. Depending on the model there may be two more wires for external dimming control. All of the connections are labled on the top of the Buckpuck, and are also diagramed in the datasheet available on the Luxdrive website.

Alarus · Dec 2, 2011

I am using the 1000mA.
I understand the wiring and the connections for the buckpuck.

What i dont understand is how to i connect the wires from the buckpuck to a PSU such as this :
http://www.ledsupply.com/24vdc42a.php

Thank you : )

mds82 · Dec 2, 2011

on the buckpuck there is a red and black wire. the red wire is for the positive input which would connect to the + output of the PSU. the black wire would connect to the - output of the PSU. Make sure the PSU is off before everything is connected

Noob Question about buckpuck

Alarus

Newly Enlightened

evilc66

Enlightened

Alarus

Newly Enlightened

mds82

Enlightened

Similar threads

Latest posts