!!!PICTURE!!! P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightness

vinhnguyen Cree XRE-R2 EZ900 Available Now, EZ1000 also available!

Last Updated: 4.16.2012

I am able to get EZ900 XRE-R2 LED now. They are expensive though! $45 for EZ900 pill only. EZ1000 are $35 for pill and reflector. Both will be driven to 2.1A.

I have played with many EZ900 and EZ1000 and my conclusion is if you want a P60 reflector XRE thrower then the EZ1000 is a better choice. You can barely tell any difference in brightness but the hotspot is a quite larger and thus lit an object better than the EZ900. I only see the EZ900 advantage when using a aspherical lens.


Paypal email: [email protected]




EZ900 1.8A VS Thrunite TN11

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Is it possible for you to make a Dereelight "pill"? I'm currently running a DBS Aspheric with an XRE-R2 EZ1000 running at 1.4 amps. Also, are your drop-ins potted?

Thanks,

Andy

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

nc_hooper said:

Is it possible for you to make a Dereelight "pill"? I'm currently running a DBS Aspheric with an XRE-R2 EZ1000 running at 1.4 amps. Also, are your drop-ins potted?

Thanks,

Andy

Click to expand...

Andy,
A P60 Pill is a Dereelight Pilll. They are interchangeable. When you purchase Vinny drop-in, well just un-screw from reflector and screw into Dereelight. thats it.

bigC

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn



2) $38 EZ900 XRE-R2, SMOOTH reflector, 1.8A Single Mode 3-13V Max

Is this just an interest thread or a sales thread? I'd like to send PP when there's definite production.

Thanks!

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

bigchelis said:

Andy,
A P60 Pill is a Dereelight Pilll. They are interchangeable. When you purchase Vinny drop-in, well just un-screw from reflector and screw into Dereelight. thats it.

bigC

Click to expand...

Bigchelis,

Thanks for the information - did not know that. I'm currently running a NB XR-E R2 EZ1000 at 1.4 amps in my DBS Aspheric and it works quite well. Significantly brighter than my Deft EDC LR (they both project a die image of approximately the same size). Estimating about 60Kcd for the LR and about 90Kcd for the DBS. But a EZ900 running at 1.8 amps sounds worth trying. On a different trend I asked if Saabluster might offer the LR configuration (1.4 amp xp-c, 207Kcd) for the DBS but no definitive answer currently.

So is this an active sales thread? Can I place an order?

Thanks,

Andy

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Of course it is possible. Mail me your pill and I will see what I can do!

Vinh Nguyen
9706 8th PL SW Unit 204
Seattle WA 98106

nc_hooper said:

Is it possible for you to make a Dereelight "pill"? I'm currently running a DBS Aspheric with an XRE-R2 EZ1000 running at 1.4 amps. Also, are your drop-ins potted?

Thanks,

Andy

Click to expand...

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

This is an active sale thread.

nc_hooper said:

Bigchelis,

Thanks for the information - did not know that. I'm currently running a NB XR-E R2 EZ1000 at 1.4 amps in my DBS Aspheric and it works quite well. Significantly brighter than my Deft EDC LR (they both project a die image of approximately the same size). Estimating about 60Kcd for the LR and about 90Kcd for the DBS. But a EZ900 running at 1.8 amps sounds worth trying. On a different trend I asked if Saabluster might offer the LR configuration (1.4 amp xp-c, 207Kcd) for the DBS but no definitive answer currently.

So is this an active sales thread? Can I place an order?

Thanks,

Andy

Click to expand...

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Go ahead and send your funds

badtziscool said:

2) $38 EZ900 XRE-R2, SMOOTH reflector, 1.8A Single Mode 3-13V Max

Is this just an interest thread or a sales thread? I'd like to send PP when there's definite production.

Thanks!

Click to expand...

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn



2) $38 EZ900 XRE-R2, Choice of SMOOTH or OP reflector, 1.8A Single Mode 3-13V Max

Smooth reflector please!
Also sent extra for the U2 XML repair.

BTW: I forgot to put my return address on the package, nor did I write PSM inside the package. So when a box shows up with no return address and a blown DD XML U2, its mine.

Thanks Vin!!! :rock:

:thanks:

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

PoliceScannerMan said:

2) $38 EZ900 XRE-R2, Choice of SMOOTH or OP reflector, 1.8A Single Mode 3-13V Max

Smooth reflector please!
Also sent extra for the U2 XML repair.

BTW: I forgot to put my return address on the package, nor did I write PSM inside the package. So when a box shows up with no return address and a blown DD XML U2, its mine.

Thanks Vin!!! :rock:

:thanks:

Click to expand...

Thanks!

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

My gosh your fast!!

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Pics? I am interested.

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

tundratrader said:

Pics? I am interested.

Click to expand...

The drop in looks just like anything other P60 Drop in. The EZ1000 already threw farther than the Thrunite Scorpion V2 With Turbo head. I am sold my first EX900 already which threw even better than the EX1000.

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Pics are important regardless. Dropin pics plus your dropin VS other drop ins would be helpful to see.

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

If you had a 4B or 4C tint I'd buy one.

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

RCantor said:

If you had a 4B or 4C tint I'd buy one.

Click to expand...

The tint is WH Cold White

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

I will take
2) $38 EZ900 XRE-R2, Choice of SMOOTH or OP reflector, 1.8A Single Mode 3-13V Max

Smooth reflector please.

Also from your other thread.

I will take

5) $47 3.15A Regulated 2 or 3 mode 3-6V Max
Smooth reflector, 3 mode, 4000k tint.

I would like thermal injection for both, if possible, and some aluminum adhesive. I understand there may be a wait for parts and build times.

Paypal for $85 is sent (Unique Transaction ID # 6LT05502JS281933W)

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Order recieved!

dirtech said:

I will take
2) $38 EZ900 XRE-R2, Choice of SMOOTH or OP reflector, 1.8A Single Mode 3-13V Max

Smooth reflector please.

Also from your other thread.

I will take

5) $47 3.15A Regulated 2 or 3 mode 3-6V Max
Smooth reflector, 3 mode, 4000k tint.

I would like thermal injection for both, if possible, and some aluminum adhesive. I understand there may be a wait for parts and build times.

Paypal for $85 is sent (Unique Transaction ID # 6LT05502JS281933W)

Click to expand...

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

I just placed an order of 25 CREE XRE-R2 LED straight from Cutter. So much $$$$$ YIKES! They provide the best LED quality though! Reflectors/Pills, Drivers and other parts cost more $$$$...I am broke LOL

Re: vinhnguyen54 P60 THROWER Drop in Cree XRE-R2 EZ900 Small Die High Surface Brightn

Wayne sold me one of his personal EZ900 R2 w\ SMO reflector and BOY DOES IT THROW!!!