Sold/Expired F/S with NEW PICTURES: SST90 Color Mods

F/S - SST90 maglite mods

You are getting these lights at a huge discount. Even if you don't like the red or green LED, you could easily use the host, batteries and driver for a new build. It cost me over $400 to build these lights. I could probably get more money if I simply sold the components separate, but I'd rather sell them complete. These lights come with the batteries which have only seen two recharge cycles.


Four 1/2 D NIMH Cells -$20 shipped conus (Included in purchase if you buy both lights)

SOLD Light #1 - Green SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Green LED (Roughly 1,000 lumens based on 5.5 amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set up to 6.7A)
-Two 26650 Batteries INCLUDED (4sevens brand, 3.7v 4000mAh) with pvc sleeve

SOLD Light #2 - Red SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Red LED (Roughly 400 lumens based on 4amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set to up to 6.7A)
-Two 32600 Batteries INCLUDED (3.0v, 4000mAh each)

Also, in the interest of full disclosure, I unfortunately de-domed the Red LED during the build. I used super glue to repair it and there is no visible impact to the beam shape.

Please specify what item you want in your "I'll take it" post.

Left to Right: Green SST90 Mag Disassembled, Four 1/2 D NIMH cells, Red SST90 Mag Disassembled.


1/2D NIMH Cells


Green SST90


Green Light Disassembled


Tailcap Mod on Green Light



H6CC Driver attached to Britelumens SST90 heatsink


Switch, wires, driver, heatsink with Green SST90


Red SST90 Mag Disassembled


Red SST90 Emitter


Switch, wires, driver, heatsink with Red SST90



From left to right - XLR250 Kill Light, Big Red One, Green Monster, Tiablo A9 with aspheric head

By davicas at 2011-11-26

Beamshot of Green Monster

By davicas at 2011-11-19

Beamshot of XLR250 Kill Light (For comparison only)

By davicas at 2011-11-19



This beamshot is a bit grainy but it shows the halo of the red SST90 well.

By davicas at 2011-12-24

Beamshot of The Big Red One; the post is 100 yards away.

By davicas at 2011-11-26


First "I'll take it" gets it.

Re: Green and Red Hunting Maglight Mods

Bump to top

Re: Green and Red Hunting Maglight Mods

Bump with price reduction

Re: Green and Red Hunting Maglight Mods

Another price reduction

Re: Green and Red Hunting Maglight Mods

Bump with HUGE price reduction!!

Re: Green and Red Hunting Maglight Mods

Bump with new price at 120

New pictures added and now four half-D cells are added for sale.

Bump with New Prices.

Pm me on the green. I just set up my account so I don't think I can send Pam's yet. Thx

I attempted to send a pm, but I don't think you have enough posts yet to received pm's. Make some more posts and then you should be able to send a pm.

Bump - still for sale. May be willing to part these out if you only need the driver, batteries or LED.

Bump
u
m
p

Bump
u
m
p

Hi, I'm fairly interested in the red one. Do they get too hot to hold after a while? If so, how long do they take to get to that level?

rockatansky said:

Hi, I'm fairly interested in the red one. Do they get too hot to hold after a while? If so, how long do they take to get to that level?

Click to expand...

After about 15 minutes of constant-on, the switch area warms up to where you wouldn't want to push it any further. You can still hold it, but with the driver costing $32 and the LED costing $35, I didn't want to push it much more. The green one will get to the same temperature after about 10 minutes.

Bump
u
m
p

Bump
u
m
p

Bump with another price reduction

I would take the green if u would be willing to do a trade ? i have a solarforce L2 host with a aspheric kit installed the modes are LOW & HIGH just built recent

las3r said:

would u be willing to do a trade ? i have a solarforce L2 host with a aspheric kit installed the modes are LOW & HIGH just built recent

Click to expand...

I may be willing to trade. Could you PM me with the specs and some pictures?