F/S - SST90 maglite mods
You are getting these lights at a huge discount. Even if you don't like the red or green LED, you could easily use the host, batteries and driver for a new build. It cost me over $400 to build these lights. I could probably get more money if I simply sold the components separate, but I'd rather sell them complete. These lights come with the batteries which have only seen two recharge cycles.
Four 1/2 D NIMH Cells -$20 shipped conus (Included in purchase if you buy both lights)
SOLD Light #1 - Green SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Green LED (Roughly 1,000 lumens based on 5.5 amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set up to 6.7A)
-Two 26650 Batteries INCLUDED (4sevens brand, 3.7v 4000mAh) with pvc sleeve
SOLD Light #2 - Red SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Red LED (Roughly 400 lumens based on 4amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set to up to 6.7A)
-Two 32600 Batteries INCLUDED (3.0v, 4000mAh each)
Also, in the interest of full disclosure, I unfortunately de-domed the Red LED during the build. I used super glue to repair it and there is no visible impact to the beam shape.
Please specify what item you want in your "I'll take it" post.
Left to Right: Green SST90 Mag Disassembled, Four 1/2 D NIMH cells, Red SST90 Mag Disassembled.
1/2D NIMH Cells
Green SST90
Green Light Disassembled
Tailcap Mod on Green Light
H6CC Driver attached to Britelumens SST90 heatsink
Switch, wires, driver, heatsink with Green SST90
Red SST90 Mag Disassembled
Red SST90 Emitter
Switch, wires, driver, heatsink with Red SST90
From left to right - XLR250 Kill Light, Big Red One, Green Monster, Tiablo A9 with aspheric head
By davicas at 2011-11-26
Beamshot of Green Monster
By davicas at 2011-11-19
Beamshot of XLR250 Kill Light (For comparison only)
By davicas at 2011-11-19
This beamshot is a bit grainy but it shows the halo of the red SST90 well.
By davicas at 2011-12-24
Beamshot of The Big Red One; the post is 100 yards away.
By davicas at 2011-11-26
First "I'll take it" gets it.
You are getting these lights at a huge discount. Even if you don't like the red or green LED, you could easily use the host, batteries and driver for a new build. It cost me over $400 to build these lights. I could probably get more money if I simply sold the components separate, but I'd rather sell them complete. These lights come with the batteries which have only seen two recharge cycles.
Four 1/2 D NIMH Cells -$20 shipped conus (Included in purchase if you buy both lights)
SOLD Light #1 - Green SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Green LED (Roughly 1,000 lumens based on 5.5 amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set up to 6.7A)
-Two 26650 Batteries INCLUDED (4sevens brand, 3.7v 4000mAh) with pvc sleeve
SOLD Light #2 - Red SST90 - $70 shipped conus (USPS Priority mail, insurance included), add $20 for international shipping.
Build Details
-Mag 2D Host
-SST90 Red LED (Roughly 400 lumens based on 4amps at tailcap)
-Britelumens SST90 Heatsink
-TaskLED H6CC Driver set to 6.3 amps (Can be set to up to 6.7A)
-Two 32600 Batteries INCLUDED (3.0v, 4000mAh each)
Also, in the interest of full disclosure, I unfortunately de-domed the Red LED during the build. I used super glue to repair it and there is no visible impact to the beam shape.
Please specify what item you want in your "I'll take it" post.
Left to Right: Green SST90 Mag Disassembled, Four 1/2 D NIMH cells, Red SST90 Mag Disassembled.
1/2D NIMH Cells
Green SST90
Green Light Disassembled
Tailcap Mod on Green Light
H6CC Driver attached to Britelumens SST90 heatsink
Switch, wires, driver, heatsink with Green SST90
Red SST90 Mag Disassembled
Red SST90 Emitter
Switch, wires, driver, heatsink with Red SST90
From left to right - XLR250 Kill Light, Big Red One, Green Monster, Tiablo A9 with aspheric head
By davicas at 2011-11-26
Beamshot of Green Monster
By davicas at 2011-11-19
Beamshot of XLR250 Kill Light (For comparison only)
By davicas at 2011-11-19
This beamshot is a bit grainy but it shows the halo of the red SST90 well.
By davicas at 2011-12-24
Beamshot of The Big Red One; the post is 100 yards away.
By davicas at 2011-11-26
First "I'll take it" gets it.
Last edited: