precisionworks
Flashaholic
My shop isn't well positioned to handle lots of one off custom work. Semi-custom work falls more in line with how I operate. Here are some examples:
McGizmo titanium pocket clip installed, sanitized bezel & body wide grooved on SWM V10R Ti:
SWM V10R Ti with Haiku narrow pattern grooves, sanitized bezel & McGizmo pocket clip installed:
Threading detail of drilled & tapped holes for McGizmo pocket clip:
Stone wash with SWM etching left intact:
SWM V10R Ti mod pricing:
Haiku pattern grooves & remove all SWM body etching - $85
Groove extender to match Haiku pattern - $25
Bore body for either 17mm or 18mm cells - $84
Bore extender (17mm or 18mm), de-hex extender & diameter match to body - $45
Remove SWM bezel etching only - $25
Drill & tap two holes #4-40 tpi for (McGizmo / Mac's / J. Hanko) pocket clip - $75 for machining + $35 cost of clip (you may also supply your own clip)
(PLEASE note: titanium screws are tender & the hex recess is easily destroyed by ordinary Allen wrenches. McGizmo recommends the Thorpe/MIP driver & that's what I use. http://miponline.com/store/mip9001.html) I can also supply Ti Torx head screws which don't require a special tool.
![ImageUploadedByCandlepowerforums1487552631.409462.jpg ImageUploadedByCandlepowerforums1487552631.409462.jpg](https://data.www.candlepowerforums.com/attachments/2/2983-9a2397a0e12f677f93ed926d13f48586.jpg)
Drill & tap on custom light bodies like McGizmo / Mac's / J. Hanko /etc. is $150 because of the additional risk involved. Drill & tap factory production lights is $75 for titanium or stainless, $50 for aluminum.
Turn around time: My shop primarily provides trouble shooting, emergency repairs & fabrication to local area business owners. Flashlights are machined whenever the time is available, meaning that your light may not be machined for many weeks after arrival - some lights may wait here 30 days or longer before they are machined. Please don't send your light if you need it back by a date certain. Lights are machined in the order in which they arrive.
_____________________________________________________________________________
[emoji768] SUREFIRE is a registered trademark of SureFire, LLC, 18300 Mount Baldy Circle, Fountain Valley, CA 92708 USA
SureFire, LLC, which manufactures and sells Surefire[emoji768] flashlights is not associated in any way form or fashion with Precision Works. SureFire, LLC, does not sponsor, warrant, or endorse any Precision Works modifications. Modifications to Surefire flashlights will void the warranty. The use of the Surefire[emoji768] trademark is strictly for the purpose of identifying the host flashlight for the Precision Works modifications.
McGizmo titanium pocket clip installed, sanitized bezel & body wide grooved on SWM V10R Ti:
SWM V10R Ti with Haiku narrow pattern grooves, sanitized bezel & McGizmo pocket clip installed:
Threading detail of drilled & tapped holes for McGizmo pocket clip:
Stone wash with SWM etching left intact:
SWM V10R Ti mod pricing:
Haiku pattern grooves & remove all SWM body etching - $85
Groove extender to match Haiku pattern - $25
Bore body for either 17mm or 18mm cells - $84
Bore extender (17mm or 18mm), de-hex extender & diameter match to body - $45
Remove SWM bezel etching only - $25
Drill & tap two holes #4-40 tpi for (McGizmo / Mac's / J. Hanko) pocket clip - $75 for machining + $35 cost of clip (you may also supply your own clip)
(PLEASE note: titanium screws are tender & the hex recess is easily destroyed by ordinary Allen wrenches. McGizmo recommends the Thorpe/MIP driver & that's what I use. http://miponline.com/store/mip9001.html) I can also supply Ti Torx head screws which don't require a special tool.
![ImageUploadedByCandlepowerforums1487552631.409462.jpg ImageUploadedByCandlepowerforums1487552631.409462.jpg](https://data.www.candlepowerforums.com/attachments/2/2983-9a2397a0e12f677f93ed926d13f48586.jpg)
Drill & tap on custom light bodies like McGizmo / Mac's / J. Hanko /etc. is $150 because of the additional risk involved. Drill & tap factory production lights is $75 for titanium or stainless, $50 for aluminum.
Turn around time: My shop primarily provides trouble shooting, emergency repairs & fabrication to local area business owners. Flashlights are machined whenever the time is available, meaning that your light may not be machined for many weeks after arrival - some lights may wait here 30 days or longer before they are machined. Please don't send your light if you need it back by a date certain. Lights are machined in the order in which they arrive.
_____________________________________________________________________________
[emoji768] SUREFIRE is a registered trademark of SureFire, LLC, 18300 Mount Baldy Circle, Fountain Valley, CA 92708 USA
SureFire, LLC, which manufactures and sells Surefire[emoji768] flashlights is not associated in any way form or fashion with Precision Works. SureFire, LLC, does not sponsor, warrant, or endorse any Precision Works modifications. Modifications to Surefire flashlights will void the warranty. The use of the Surefire[emoji768] trademark is strictly for the purpose of identifying the host flashlight for the Precision Works modifications.
Attachments
Last edited: