All SOLD OR WITHDRAWN

Some more new assembled drop ins!
2. SOLD XML-T6 Cool White, 4A, High-Medium-Moonlight with memory. Very bright and throws quite well. Smooth reflector. 4.5V $35

5. SOLD XML-U2 Cool White, 4A, High-Medium-Moonlight with memory. All I have to say is BRIGHT and THROWS! Smooth reflector. 4.5V $44 $39 $36

9. SOLD XPE-R2 Cool White nice hot spot with no donut hole. 1.6A OP. Single mode. 4.2V $17
-----------------------------------------------------------------------------------------------
Photo: High Resolution Photo

SOLD 1) SolarForce L2T + Flat Stainless Steel Bezel + McClicky + Stainless Steel Clip. Clip gets 2 layer of heat shrink tubing so it would not scratch the body. XML-U2 Pure White tint, Moonlight-Medium-High with last mode memory, Smooth reflector, ultra bright, throws well for XML P60, 4.5V Max, 18650 only, Max draw 4A $68 $63
----------------------------------------------------------------------------------------------------------------
XRE-R2 Pills intended for Aspherical light such as the Deerelight DBS. I test these from a bunch and they were the among the brightest. 3-6V, 2.1A, $30/each. I have 5 total

I also have EZ900 2.1A pill for $45

1) taken
2) taken




Paypal: [email protected]

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Which would you say is the best thrower of the bunch ?

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

I think number 9

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

I'll grab your #2 with Host.. Also if you could not put the drop-in so tight in the host just incase if I get the urge to swap it out later.. The last one I couldn't get the drop-in out without breaking something.. That poop was STUCK!!! Thanks..

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

MrSypher said:

I'll grab your #2 with Host.. Also if you could not put the drop-in so tight in the host just incase if I get the urge to swap it out later.. The last one I couldn't get the drop-in out without breaking something.. That poop was STUCK!!! Thanks..

Click to expand...

Thats how we get good heat transfer. You can always use large pliers to grab the rim and twist them out.

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

vinhnguyen54 said:

Thats how we get good heat transfer. You can always use large pliers to grab the rim and twist them out.

Click to expand...

YEah I know, I didn't want to chance the drop-in breaking.. How the hell do you wedge it in there like that? It's not by hand, is it?

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

MrSypher said:

YEah I know, I didn't want to chance the drop-in breaking.. How the hell do you wedge it in there like that? It's not by hand, is it?

Click to expand...

I showed how its doen in a video I posted in my main XML sale thread.

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Darn, forgot all about this

I'll take #9. XPE-R2 Cool White nice hot spot with no donut hole. 1.6A OP. Single mode. 4.2V $17

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Alright for that #2 with Host & McKlic

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Received my 2.16A XR-E drop in today! It's amazing to see the poor old XR-E chugging along without any tint shift driven at double the spec! Can't wait to get that thing behind a pair of aspherics!

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Just curious. #4, #6, #7, & #8 appear to be identical. A typo, or am I missing something?

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12

Derek Dean said:

Just curious. #4, #6, #7, & #8 appear to be identical. A typo, or am I missing something?

Click to expand...

They are identical

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

some lights added

Re: vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

$5 off most things

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

XRE pills for asperical light added

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

ill take one of these..XRE-R2 Pills intended for Aspherical light. and since im the first can you send me the best one? thanks
these are single mode correct? and a plug and play into the new deerelight asph head?

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

hron61 said:

ill take one of these..XRE-R2 Pills intended for Aspherical light. and since im the first can you send me the best one? thanks
these are single mode correct? and a plug and play into the new deerelight asph head?

Click to expand...

Correct. And I will select the brightest for yah.

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

great thanks. payment inbound.


edit...payment sent, and thanks for hand picking the best one.

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

Really enjoying my #9. XPE-R2 Cool White !

I needed a thrower for work, and this beat out my Jetbeam Military R2 with a smooth reflector !


Would you be able to make this same drop in using a smooth reflector but avoiding any type of donut ?

Great work and thanks!

Re: REDUCED $5 off vinhnguyen54 Assembled P60/D26 Drop In 3.17.12 + Custom Lights

I cant do smooth reflector without donut hole.

Kid9P said:

Really enjoying my #9. XPE-R2 Cool White !

I needed a thrower for work, and this beat out my Jetbeam Military R2 with a smooth reflector !


Would you be able to make this same drop in using a smooth reflector but avoiding any type of donut ?

Great work and thanks!

Click to expand...