benthiccracker
Enlightened
Will AW Protected 123 secondaries damage my stock SureFire heads? My concern is too much voltage for the KX2 with (2) AW Protected 123 and The 80 Lumen version of the Backup with (1) AW Protected 123
AW Protected 123 secondaries damage stock SureFire heads?
- Thread starter benthiccracker
- Start date
Help Support Candle Power Flashlight Forum
ToyTank
Enlightened
I THINK KX4 is rated for all surefire C/Z/P so that would include C3/9P/etc. I don't have one myslef but 2 rcr will be fine if it can handle 3 primaries.
benthiccracker
Enlightened
the only problem is that neither head I mentioned was a KX4.
ElectronGuru
Flashaholic
Anything over 3.0v is a risk. If you're going to risk it, you're better of going with the lower voltage LiPo's.
benthiccracker
Enlightened
thanks Dan!
Kestrel
Flashaholic
There have been many reports of the E1B head flickering when operating with a fully-charged RCR123.
From what I can tell by reading here, it's one of the least-compatible SF's with regards to LiIon rechargeables.
From what I can tell by reading here, it's one of the least-compatible SF's with regards to LiIon rechargeables.
benthiccracker
Enlightened
thanks for all the input guys!
ToyTank
Enlightened
I need to learn to read
benthiccracker
Enlightened
I do that occasionally myself... ADD?!?
