Hello,
today I put some parts together:
-Maglite 2D body
-FiveMega 3" head
-9x Cree XM-L U2 1A emitters
-8x R5 reflectors, 1x P60 reflector
-KD 9x XM-L T6 driver, 3 modes
-3x AW 26500 IMR batteries
-custom made heatsinking
R5 reflektors modified backside to avoid electric contact to wiring,
P60 cut down to fit in length, switch modified with 20awg teflon wire,
driver heatsinked and epoxied (thanks to Vinz from Germany!),
tailcap & spring modified for deep contact,
XM-L U2 emitters glued to heatsink:
KD driver placed in Mag 2D body:
XM-L emitters wired in series with 26 awg teflon wire, heatsink placed in FM 3" head:
Reflectors and emitters in it´s place:
"Eco-Star II" Nona 9x XM-L T6 Led Flashlight, sideview:
"Eco-Star II" Nona 9x XM-L T6 Led Flashlight, frontview:
current at the tailcap with 3x AW 26500 IMR cells fresh from the charger:
UPDATE with some beamshots, taken with my iphone 4s, please forgive blurrish quality:
Parking lot from a shop close to Frankfurt in the dark:
Parking lot with Ultrafire WF-502B, XM-L T6 P60 drop-in on high:
"Eco-Star II" nona 9x XM-L T6, highest mode:
..funny incident- someone drove directly in front of my camera to deliver something-
took the chance to take a pic, same situation, lightened by car lights:
..now sorry in advance for bad quality of following pic, but I only had one chance to take it
until the guy on picture got little bit nervous... :devil:
car with lights on normal, "Eco-Star II" 9x T6 on "high" & nervous guy, close to "high":
At last I should tell you, that the guy was that full of thanks, that he closed the parking lot of
the market when he left the scene- but I could get back my car today when they opened
the market...
..best regards from Frankfurt & thank you for watching,
Steffen
:wave:
today I put some parts together:
-Maglite 2D body
-FiveMega 3" head
-9x Cree XM-L U2 1A emitters
-8x R5 reflectors, 1x P60 reflector
-KD 9x XM-L T6 driver, 3 modes
-3x AW 26500 IMR batteries
-custom made heatsinking
R5 reflektors modified backside to avoid electric contact to wiring,
P60 cut down to fit in length, switch modified with 20awg teflon wire,
driver heatsinked and epoxied (thanks to Vinz from Germany!),
tailcap & spring modified for deep contact,
XM-L U2 emitters glued to heatsink:
KD driver placed in Mag 2D body:
XM-L emitters wired in series with 26 awg teflon wire, heatsink placed in FM 3" head:
Reflectors and emitters in it´s place:
"Eco-Star II" Nona 9x XM-L T6 Led Flashlight, sideview:
"Eco-Star II" Nona 9x XM-L T6 Led Flashlight, frontview:
current at the tailcap with 3x AW 26500 IMR cells fresh from the charger:
UPDATE with some beamshots, taken with my iphone 4s, please forgive blurrish quality:
Parking lot from a shop close to Frankfurt in the dark:
Parking lot with Ultrafire WF-502B, XM-L T6 P60 drop-in on high:
"Eco-Star II" nona 9x XM-L T6, highest mode:
..funny incident- someone drove directly in front of my camera to deliver something-
took the chance to take a pic, same situation, lightened by car lights:
..now sorry in advance for bad quality of following pic, but I only had one chance to take it
until the guy on picture got little bit nervous... :devil:
car with lights on normal, "Eco-Star II" 9x T6 on "high" & nervous guy, close to "high":
At last I should tell you, that the guy was that full of thanks, that he closed the parking lot of
the market when he left the scene- but I could get back my car today when they opened
the market...
..best regards from Frankfurt & thank you for watching,
Steffen
:wave:
Last edited:
