SOLD
Mag 1D shorty build with a XML T5 neutral led from Cutter electronics, one of the best tints selected.
Driver is Shinning Beam (Brian) 2.8A 8x7135, 3 level Hi/Lo/Med
Heat sink is Anodized H22A P7 heatsink
Wires are 22AWG silver coated copper Teflon wires
Mag D switch pos. contact raised with copper pad
Mag D tail spring modified, trimmed & grinded to be smooth contact at battery, no crushing/damaging
Battery sleeve included
Runs on 26650 (battery not included)
Price $139 ---Reduced $129 - $119
Shipping $9 in US
Comes with stock reflector but you can upgrade to one of the reflectors below instead.
Optional reflector Upgrades: (I only have one of each, you can order all three but you can not order more than 1 of each)
Updated with free NB reflector option
Nailbender sputter $5 --Free (I just did a re-sputter to make it reflect better than what's shown in the photo)
Metal OP sputter $10 -- $5 (One of the best sputter job on mag reflector, looks like Metal OP)
ma_sha1 Hybrid sputter $15 -$10
(A leftover from what I made a while back http://www.candlepowerforums.com/vb/showthread.php?290733-SOLD-One-more-Mag-2C-*-XPG-R5-*-1-6-Amp-*Hybrid-Reflector*Over-500-Lumens*)
FS is the one on the left:
Metal OP sputter shown:
Optional reflectors Left Nailbenser sputter
Middle: Metal OP sputter
Right ma_sha1 hybrid sputter
Sweet neutral beam with Metal OP sputter
The hybrid sputter looks almost as good, but even brighter
Mag 1D shorty build with a XML T5 neutral led from Cutter electronics, one of the best tints selected.
Driver is Shinning Beam (Brian) 2.8A 8x7135, 3 level Hi/Lo/Med
Heat sink is Anodized H22A P7 heatsink
Wires are 22AWG silver coated copper Teflon wires
Mag D switch pos. contact raised with copper pad
Mag D tail spring modified, trimmed & grinded to be smooth contact at battery, no crushing/damaging
Battery sleeve included
Runs on 26650 (battery not included)
Price $139 ---Reduced $129 - $119
Shipping $9 in US
Comes with stock reflector but you can upgrade to one of the reflectors below instead.
Optional reflector Upgrades: (I only have one of each, you can order all three but you can not order more than 1 of each)
Updated with free NB reflector option
Nailbender sputter $5 --Free (I just did a re-sputter to make it reflect better than what's shown in the photo)
Metal OP sputter $10 -- $5 (One of the best sputter job on mag reflector, looks like Metal OP)
ma_sha1 Hybrid sputter $15 -$10
(A leftover from what I made a while back http://www.candlepowerforums.com/vb/showthread.php?290733-SOLD-One-more-Mag-2C-*-XPG-R5-*-1-6-Amp-*Hybrid-Reflector*Over-500-Lumens*)
FS is the one on the left:
Metal OP sputter shown:
Optional reflectors Left Nailbenser sputter
Middle: Metal OP sputter
Right ma_sha1 hybrid sputter
Sweet neutral beam with Metal OP sputter
The hybrid sputter looks almost as good, but even brighter
Last edited: