O-Ring for a Surefire C2 to fill in gap at Bezel after installing Malkoff M61 ?

Talldog77656 · Jul 30, 2012

After installing a Malkoff M61 in my Surefire C2, the Bezel won't screw down all the way which leaves about a 1/16" gap. Does anyone sell a gasket or o-ring to take up this space?

Thanks

enomosiki · Jul 30, 2012

Apparently, the tiny gap between the head and body upon installing a Malkoff is a known issue but not a problem.

If it bothers you, you can file the top of the drop-in with a fine file to get rid of it.

ElectronGuru · Jul 30, 2012

The flat O ring found under the pyrex lens that came with the C2 bezel is perfect.

Just replace it with thicker o ring when replacing the lens and you're good to go.

Jaiofspam · Jul 31, 2012

i used a spare oring from my fenix ld10

Talldog77656 · Jul 31, 2012

Thanks all, I ordered some of those Green Glo in the dark O-rings.

O-Ring for a Surefire C2 to fill in gap at Bezel after installing Malkoff M61 ?

Talldog77656

Newly Enlightened

enomosiki

Flashlight Enthusiast

ElectronGuru

Flashaholic

Jaiofspam

Newly Enlightened

Talldog77656

Newly Enlightened

Similar threads

Latest posts