• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired [SOLD] McGizmo Nichia 119 High CRI custom brass mule pill for PD's

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
>>>> SOLD <<<<

This is a custom made brass mule pill for McGizmo PD's. It utilizes a Nichia 119 High CRI LED taken from a High CRI Haiku donor. This was just taken out of an aluminum PD and should also work for Ti versions as well. This pill will allow you to interchange between a typical flashlight beam from the McR-20s and a full flood beam from a reflectorless light. It places the LED very close to the window to allow for maximum flood. If you ever wanted a Mule PD, but never had a chance to own one, this is your chance to try one out. I find the classic PD actually much more ergonomic than the mule PD due to its added length and larger head.

IMG_0232.jpg


IMG_0233.jpg


I'm asking $65 $55 $49 $45 shipped via USPS Priority + Delivery Confirmation. U.S. buyers only. PM me with questions and/or offers. First to post "I'll Take It" in this thread gets priority over all other communication. Insurance is an additional $1.65 per $100 of coverage. I am not responsible if the package is damaged or lost during shipping if insurance is not purchased. Insurance is always recommended to cover these situations.
 
Last edited:

archimedes

Flashaholic
Joined
Nov 12, 2010
Messages
15,780
Location
CONUS, top left
Any chance you might happen to have an empty bezel available, too?

I have a spare C-Pak that I could use, but no PD/Arc-6 type bezel ... :)
 

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
Re: FS: McGizmo Nichia 119 High CRI custom brass mule pill for PD's

Any chance you might happen to have an empty bezel available, too?

I have a spare C-Pak that I could use, but no PD/Arc-6 type bezel ... :)

Sorry, wish I did, but I don't have an empty bezel available.
 

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
Re: FS: McGizmo Nichia 119 High CRI custom brass mule pill for PD's

:bump: PMs responded to and still available.
 

gunga

Flashaholic
Joined
Nov 29, 2006
Messages
8,080
Location
Vancouver, BC, Canada
Re: FS: McGizmo Nichia 119 High CRI custom brass mule pill for PD's

Would this fit a Haiku? Is there an actual circuit in it?
 

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
Re: FS: McGizmo Nichia 119 High CRI custom brass mule pill for PD's

Would this fit a Haiku? Is there an actual circuit in it?

I don't think it will fit a haiku, since they use a McR-17(xr) reflector. It was designed to take the place of the McR-20(s) reflector, heatsink, and lift the pcb close to the window. It utilizes the stock WiZx2 or GDx2 circuit board that classic McGizmo PD's already have. In those lights, the circuit and LED are separated in the head by the stock heatsink integral to the head.

As far as I know, this is only for McGizmo PD's that currently utilize the McR-20 or McR-20s reflector.
 

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
Re: [$$$ drop]: McGizmo Nichia 119 High CRI custom brass mule pill for PD's

:sigh: another price drop
 
Top