• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Tail-Standing Shrouds for E-Series in Titanium and Copper Available NOW

Moddoo

Flashlight Enthusiast
Joined
Nov 19, 2008
Messages
1,243
Location
Minnesota
Tail-Standing Shrouds for E-Series in Titanium and Copper

Hey Guys,

I am busy building up some more of the custom Triple E-series lights.

But I wanted you all to know that we made a few extra Tail shrouds for the Stock E-series clicky tailcaps.

We started this journey a while back. See original version HERE
We only have the model pictured on this page available at this time.

These are 1" diameter (same as the bezel)
They tail-stand very well, and the button is easy to access.
They retain the factory water resistance.
Get them while you can.





To see them installed please see some great customer shots HERE

Thank You for your support.
 
Last edited:

msim

Enlightened
Joined
Jul 6, 2012
Messages
406
Location
Seattle, WA
Interested in a titanium one for my E1B.

Edit: Realized I can click the photo to get to the product page... nothing gets by me! ;)
 
Last edited:

msim

Enlightened
Joined
Jul 6, 2012
Messages
406
Location
Seattle, WA
ykMj0.jpg

siGqZ.jpg

wHROO.jpg


I figured I'd post some pics... Looks good and works great!
 

Glock 22

Enlightened
Joined
Dec 28, 2011
Messages
770
Location
KY
This just makes me want one even more for my E1B setup. +1 on looking phenomenal. Thanks for posting the pic!
 

tattoosteve99

Newly Enlightened
Joined
Mar 8, 2010
Messages
171
Location
Newton NC
I wish I could get my hands on the older version of these. I like the new ones but I also like the slimmer profile of the old ones ;)
 

jellydonut

Enlightened
Joined
Jun 13, 2010
Messages
995
Location
Europe
Any chance we'll see these for the A2/LX2/Kroma tailcap? (these 3 all use the same switch retainer, expanding the market for such a shroud.)
 

DragonHead

Enlightened
Joined
Nov 18, 2012
Messages
387
If the "clip" option is the holes drilled into the lip. Then I too would love that.
tail stand and a lanyard, thats what I want for my e series.
and hows the 3cell e bodies?
 

999snafu

Newly Enlightened
Joined
Mar 16, 2006
Messages
79
Location
North East UK
Just got a couple of these to add to other lights after really liking it on the custom E2e Triple i got and just wanna know what's the best way to get the original plastic boot retaining ring out? Cos mine seem to be pretty tight in there, do I need to just break them out or is there a good way to get them out intact?
 

archimedes

Flashaholic
Joined
Nov 12, 2010
Messages
15,780
Location
CONUS, top left
Just got a couple of these to add to other lights after really liking it on the custom E2e Triple i got and just wanna know what's the best way to get the original plastic boot retaining ring out? Cos mine seem to be pretty tight in there, do I need to just break them out or is there a good way to get them out intact?

The threads may have Loctite on them....
 

Moddoo

Flashlight Enthusiast
Joined
Nov 19, 2008
Messages
1,243
Location
Minnesota
Just got a couple of these to add to other lights after really liking it on the custom E2e Triple i got and just wanna know what's the best way to get the original plastic boot retaining ring out? Cos mine seem to be pretty tight in there, do I need to just break them out or is there a good way to get them out intact?

the rings are anodized aluminum. and yes they have loctite on them.

best bet is to heat the tail at about 200 degrees (boiling water) then remove them while hot.

good luck to ya, they usually do not fight much when hot.
 

Glock 22

Enlightened
Joined
Dec 28, 2011
Messages
770
Location
KY
:thumbsup: Awesome Titanium Tailstand Shrould. Great polised look, it works and feels perfect on my Surefire EB1-T.
 

Beamhead

Flashlight Enthusiast
Joined
Jul 6, 2004
Messages
4,253
Location
gone "Squatchin" :p
The perfect accessory for the 30th Anniversary Edition E1B. Now I need to decide whether to flame color it or bead blast it....... :p
Thanks Tom, Dan and Sarah. :)

 
Last edited:
Top