TG2 and TRE aspherics >>> XP-G2 120,000 lux and XR-E 155,000 lux

I made for many Thrower and Flood to Throw like TRA, TMA, TMR, FT66 etc...
These are my lastest thrower TG2 and TRE , but They are not the LAST ONE!!!
(Still waiting for Round LED )


TG2 spec :
XP-G2 20mm star
67mm aspheric lens
2280mA 6x7138 V2
Power 1x18650 or 1x26650
110,000 - 130,000 lux

TRE spec :
XR-E ez900 20mm Star
67mm aspheric lens
1500mA 3-18V
Power 2xCR123 , 2xR123R , 2x18350
140,000 - 170,000 lux



My concept and why I made them :

Sometime I don't need spill to bother someone, Focus to the target.
67mm aspheric lens is not too small and not too big to hold in hand.
Be easy to swap LED and Driver.

Images 1 second , ISO 200


Left XP-G2 , Right XR-E ez900






Distance!!!




XR-E ez900 slightly out focus







XP-G2 with my best DX aspheric lens

Wow, that G2 works quite well. Awesome!

Blitzwing said:

Wow, that G2 works quite well. Awesome!

Click to expand...

Thanks.

Nice work awesome!

Imagine that G2 with the dome removed. I did that to my XR-E and pushed it beyond what Cree made it to go. After using it for a week, the solder on the wiring to LED has start to slowly melt off due to the draw.

wow. great work!

Feed that G2 3A. I'm running one of mine at 3.2A

Toaster79 said:

Feed that G2 3A. I'm running one of mine at 3.2A

Click to expand...

How well is the phosphor and bond wires holding up on the high draw? De-dome it behind an aspherical lens

luminositykilledthecat... said:

Nice work awesome!

Click to expand...

jmpaul320 said:

wow. great work!

Click to expand...

Thanks

Toaster79 said:

Feed that G2 3A. I'm running one of mine at 3.2A

Click to expand...

If I solder to copper PCB, I will

Tiresius said:

Imagine that G2 with the dome removed. I did that to my XR-E and pushed it beyond what Cree made it to go. After using it for a week, the solder on the wiring to LED has start to slowly melt off due to the draw.

Click to expand...

I saw your thread , If you swap aspherics to DX aspherics you will see sweet spot

Luminater said:

I saw your thread , If you swap aspherics to DX aspherics you will see sweet spot

Click to expand...

After I saw this thread, I already swapped over my lens I did it a couple days back and the beam is a lot better off. The original one had too wide of a parabola and it didn't do so well.

Cool :thumbsup:

What are the head/bodies?

Luminater I tried to de dome deerelight xre ez900 but I broke it...

I will not de dome again...

How many juice U can get by dedoming xre and put it back in aspheric?

Does it have any improvements at all? We all know that de doming works in reflector but I am not sure for aspheric...

Tatjanamagic said:

Luminater I tried to de dome deerelight xre ez900 but I broke it...

I will not de dome again...

How many juice U can get by dedoming xre and put it back in aspheric?

Does it have any improvements at all? We all know that de doming works in reflector but I am not sure for aspheric...

Click to expand...

I don't have any measurement but look @ my post with the Crelant XR-C thrower. I ditched the XR-C and went with my de-domed XR-E. Not an ez900 but you'll get the idea.

Tatjanamagic said:

Luminater I tried to de dome deerelight xre ez900 but I broke it...

I will not de dome again...

How many juice U can get by dedoming xre and put it back in aspheric?

Does it have any improvements at all? We all know that de doming works in reflector but I am not sure for aspheric...

Click to expand...

Dome = Aspherics
De-domed = Reflector

I de-domed SST-50 , SST-90 , XM-L for difference reflector, but not for aspherics.

Friend That is not true...

Tiresius de domed his XRE and got this http://www.candlepowerforums.com/vb/showthread.php?345669-Crelant-7G5-XR-C-Thrower

I would say that he is in 150 if no 200 mph territory...

Check his thread...

Tatjanamagic said:

Friend That is not true...

Tiresius de domed his XRE and got this http://www.candlepowerforums.com/vb/showthread.php?345669-Crelant-7G5-XR-C-Thrower

I would say that he is in 150 if no 200 mph territory...

Check his thread...

Click to expand...

I read that thread, and I tested a few times.
Dome for Aspherics give more OTF , bigger spot , bit less throw than de-domed. So I prefer dome for aspherics.
Try with yourself .
Sorry, English is not my native language.