ALL SOLD. THANKS CPF!
For sale are three single level CREE XM-L Aleph light engines. These use a custom circuit board with four AMC7135 IC's at 380mA each. The aluminum can was custom machined for the 8mm MCPCB, and dissipates heat quickly into the head of the light. These are ideal for use with a single Li-Ion cell (2.8 - 6V). Brass battery contact for long wear.
1. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
2. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
3. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
The following light engines are built using the same custom aluminum cans and brass battery contacts as above, but feature a different LED and driver board combination.
4. Nichia NS6W183-H3, 700mA single level GD light engine. Warm white high CRI LED with a CCT of 3700K. The build quality is A+ on this light engine, but I am not happy with my glow epoxy application. As a result, I am considering this a "second". Excellent Mule light engine. Use with any single primary 3V, or RCR cell (1.8 - 5.5V). $70 SOLD
5. Cree R5 1C XP-G2, 1000mA multi-level FluPIC light engine. Can be programmed with custom levels following the user guide available here: http://www.candlepowerforums.com/vb...ntroducing-FluPIC-V2-2-firmware-User-Guide-UP!. Use with any 3.7V rechargeable cell, or a maximum of 5.5V. $109 SOLD
Picture of the glow epoxy after being illuminated for a few minutes.
The first "I'll take it" posted here takes preference over other communication. All prices include shipping within the United States. There is no extra fee for credit card PayPal. Insurance is not included, but is available upon request for an additional fee based on insured value. I can not be liable for damage or loss once the light engine is in the hands of the USPS.
Thanks for looking
For sale are three single level CREE XM-L Aleph light engines. These use a custom circuit board with four AMC7135 IC's at 380mA each. The aluminum can was custom machined for the 8mm MCPCB, and dissipates heat quickly into the head of the light. These are ideal for use with a single Li-Ion cell (2.8 - 6V). Brass battery contact for long wear.
1. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
2. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
3. CREE U2 2S XM-L, 1520mA single level light engine. $60 SOLD
The following light engines are built using the same custom aluminum cans and brass battery contacts as above, but feature a different LED and driver board combination.
4. Nichia NS6W183-H3, 700mA single level GD light engine. Warm white high CRI LED with a CCT of 3700K. The build quality is A+ on this light engine, but I am not happy with my glow epoxy application. As a result, I am considering this a "second". Excellent Mule light engine. Use with any single primary 3V, or RCR cell (1.8 - 5.5V). $70 SOLD
5. Cree R5 1C XP-G2, 1000mA multi-level FluPIC light engine. Can be programmed with custom levels following the user guide available here: http://www.candlepowerforums.com/vb...ntroducing-FluPIC-V2-2-firmware-User-Guide-UP!. Use with any 3.7V rechargeable cell, or a maximum of 5.5V. $109 SOLD
Picture of the glow epoxy after being illuminated for a few minutes.
The first "I'll take it" posted here takes preference over other communication. All prices include shipping within the United States. There is no extra fee for credit card PayPal. Insurance is not included, but is available upon request for an additional fee based on insured value. I can not be liable for damage or loss once the light engine is in the hands of the USPS.
Thanks for looking
Last edited: