alpg88
Flashlight Enthusiast
- Joined
- Apr 19, 2005
- Messages
- 5,338
another build, this time headlamp.
3 xpg r2, 350ma. driver, (tried 700ma before, radiator gets very hot, fast).
narrow lens.
radio shack 4aa holder with switch. fits 14500 fine.
headband is made from mouse pads, and made of 2 parts, connected with snaps, (walmart, 3.99 for 8).
used dental floss as thread, very strong stuff.
originnaly had xpe star, but accidentally hooked 4s dd , after radiator became too hot to touch within 10-15 sec, i figureds something was wrong, the leds worked after that, but i replaced them with xpg star anyway.
http://i876.photobucket.com/albums/ab324/alpg88/P1070484.jpg
Your image is too large and has been replaced with a link. Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm
3 xpg r2, 350ma. driver, (tried 700ma before, radiator gets very hot, fast).
narrow lens.
radio shack 4aa holder with switch. fits 14500 fine.
headband is made from mouse pads, and made of 2 parts, connected with snaps, (walmart, 3.99 for 8).
used dental floss as thread, very strong stuff.
originnaly had xpe star, but accidentally hooked 4s dd , after radiator became too hot to touch within 10-15 sec, i figureds something was wrong, the leds worked after that, but i replaced them with xpg star anyway.
http://i876.photobucket.com/albums/ab324/alpg88/P1070484.jpg
Your image is too large and has been replaced with a link. Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm
Last edited by a moderator:
