Hello guys, Terminator arrived few days ago..
The BlackShadow Terminator is an LED flashlight with four CREE XM-L U2 LEDs for up to 3500 lumens on max output. The light is controlled by a switch conveniently located on the attached handle and is powered by four 18650 batteries (not included).
- Dimensions: 132mm (Length), 69mm (diameter of head), 93mm (Height)
- Weight: 395g (Without Battery)
- Three outputs (XM-L U2): 3500 lumens (1h10m) - 1500 lumens (2h40m) - 400 lumens (11h25m)
- Accessories: Tactical parachute-cord, Spare O-ring, User manual and Warranty card.
- Stainless steel bezels
- Impact-resistant optical tempered glass lens with anti-reflective coating
- Heat sink fins
- Aluminum alloy body with abrasion-resistant surface finish anti slip rhombic knurling
- Design offers a decent overall grip
- Aluminum alloy tail cap with rhombic knurling, can tail stand
- Four premium CREE XM-L U2 LEDs, rated Max 3500-lumen output
- Custom designed metal reflector offers perfect beam profile.
- High-performance push button switch. Slightly click the switch to turn on the flashlight and change the brightness mode among High-Mid-Low-OFF. Pressing and hold the switch for more than 1 second to turn on or off Strobe mode.
- Power indicating system: The indicator light is green when the power is available, it will change into red and flash three times every second when the power is low.
- The indicator light will flash when the flashlight in on standby state, which will help you to find it easily in deep dark or complex environment.
- You can completely shut off the power to save the energy, by loosening the head a half turn if in long periods of inactivity.
- Built in digital control system, powered by 4 pcs 18650 batteries (not included)
First impressions
Pro
- Very nice build quality, similar than other top chinese brands
- Perfect anodizing, no scratch etc. (HA Type-II)
- Smooth thread
- Clean reflectors, lens with perfectly centered leds
- Beautiful neutral white tint
- Excellent beam quality, very good balance (throw-flood)
- Hidden strobe mode
- Temperature control
- can run 1, 2 or 3 pcs 18650 battery (not only 4pcs)
- Relatively small size with awesome output
Con
- no memory
- visible pwm flickering low and medium mode (high mode is perfect, no pwm!), but when I use outdoor, the pwm is not too annoying, especially medium mode.
other
- simple UI, 3 modes, but not too user friendly, always low-medium-high-off
candle lamp, Terminator review
http://www.candlepowerforums.com/vb...adow-Terminator-(4xXM-L-T6-NW-4x18650)-Review
Beamshots (I will add more pictures later) Click images for higher res
Blackshadow vs Xeno F42 V2 R5nw
Blackshadow vs Sunwayman T20CS
Blackshadow vs Spark SL6S-740NW
Blackshadow vs Nitecore MT26
Blackshadow vs Nitecore
Blackshadow vs Fenix TK35 U2
Blackshadow vs Olight SR51
Blackshadow vs Armytek Barracuda
Modes
more pictures coming soon
The BlackShadow Terminator is an LED flashlight with four CREE XM-L U2 LEDs for up to 3500 lumens on max output. The light is controlled by a switch conveniently located on the attached handle and is powered by four 18650 batteries (not included).
- Dimensions: 132mm (Length), 69mm (diameter of head), 93mm (Height)
- Weight: 395g (Without Battery)
- Three outputs (XM-L U2): 3500 lumens (1h10m) - 1500 lumens (2h40m) - 400 lumens (11h25m)
- Accessories: Tactical parachute-cord, Spare O-ring, User manual and Warranty card.
- Stainless steel bezels
- Impact-resistant optical tempered glass lens with anti-reflective coating
- Heat sink fins
- Aluminum alloy body with abrasion-resistant surface finish anti slip rhombic knurling
- Design offers a decent overall grip
- Aluminum alloy tail cap with rhombic knurling, can tail stand
- Four premium CREE XM-L U2 LEDs, rated Max 3500-lumen output
- Custom designed metal reflector offers perfect beam profile.
- High-performance push button switch. Slightly click the switch to turn on the flashlight and change the brightness mode among High-Mid-Low-OFF. Pressing and hold the switch for more than 1 second to turn on or off Strobe mode.
- Power indicating system: The indicator light is green when the power is available, it will change into red and flash three times every second when the power is low.
- The indicator light will flash when the flashlight in on standby state, which will help you to find it easily in deep dark or complex environment.
- You can completely shut off the power to save the energy, by loosening the head a half turn if in long periods of inactivity.
- Built in digital control system, powered by 4 pcs 18650 batteries (not included)
First impressions
Pro
- Very nice build quality, similar than other top chinese brands
- Perfect anodizing, no scratch etc. (HA Type-II)
- Smooth thread
- Clean reflectors, lens with perfectly centered leds
- Beautiful neutral white tint
- Excellent beam quality, very good balance (throw-flood)
- Hidden strobe mode
- Temperature control
- can run 1, 2 or 3 pcs 18650 battery (not only 4pcs)
- Relatively small size with awesome output
Con
- no memory
- visible pwm flickering low and medium mode (high mode is perfect, no pwm!), but when I use outdoor, the pwm is not too annoying, especially medium mode.
other
- simple UI, 3 modes, but not too user friendly, always low-medium-high-off
candle lamp, Terminator review
http://www.candlepowerforums.com/vb...adow-Terminator-(4xXM-L-T6-NW-4x18650)-Review
Beamshots (I will add more pictures later) Click images for higher res
Blackshadow vs Xeno F42 V2 R5nw
Blackshadow vs Sunwayman T20CS
Blackshadow vs Spark SL6S-740NW
Blackshadow vs Nitecore MT26
Blackshadow vs Nitecore
Blackshadow vs Fenix TK35 U2
Blackshadow vs Olight SR51
Blackshadow vs Armytek Barracuda
Modes
more pictures coming soon
Last edited: