Hello guys,
I am a 18years old german Modder and i did some big mods in the last years, for example a LED LENSER X21 with 7xXM-L, but also some small mods, for example a XM-L with 600 Lumens into a Mako Ti Flashlight or some complete self-builds.
My current project has the aim: Reach the most possible throw out of one XM-L with one lithium battery.
The reflector of the Olight SR90 was the basis of my project.
The XM-L on copper basis is dedomed
the driver delivers 6A
and the battery is a 26650 King Kong accu
so i start with the head of the Flashlight.
http://www.abload.de/img/imgp3008h6zbq.jpg
the reflektor fits perfect into the head
http://www.abload.de/img/imgp6366jdz5n.jpg
a solid copper heatsink cools the LED
http://www.abload.de/img/imgp6369m0agj.jpg
a 6A driver makes the XM-L lightening
http://www.abload.de/img/imgp6374miyge.jpg
and now the special body is on my lathe
http://www.abload.de/img/imgp70237pbrq.jpg
http://www.abload.de/img/imgp70246czys.jpg
http://www.abload.de/img/imgp7040v1ztl.jpg
http://www.abload.de/img/imgp704666adi.jpg
the whole Flashlight
http://www.abload.de/img/imgp7035ppb49.jpg
http://www.abload.de/img/imgp7036awbpr.jpg
and a old Beamshot with only 200Klux:
http://www.abload.de/img/06sr90xm-lcmfc3.jpg
and the X21 with 7xXM-l to compare:
http://www.abload.de/img/07x21mod0vcrs.jpg
with the XM-L in the big reflector i reached 448.000 Lux :twothumbs
sorry for my bad english and best regards
Michael
As per my earlier PM, your images are too large and have been replaced with links Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm
I am a 18years old german Modder and i did some big mods in the last years, for example a LED LENSER X21 with 7xXM-L, but also some small mods, for example a XM-L with 600 Lumens into a Mako Ti Flashlight or some complete self-builds.
My current project has the aim: Reach the most possible throw out of one XM-L with one lithium battery.
The reflector of the Olight SR90 was the basis of my project.
The XM-L on copper basis is dedomed
the driver delivers 6A
and the battery is a 26650 King Kong accu
so i start with the head of the Flashlight.
http://www.abload.de/img/imgp3008h6zbq.jpg
the reflektor fits perfect into the head
http://www.abload.de/img/imgp6366jdz5n.jpg
a solid copper heatsink cools the LED
http://www.abload.de/img/imgp6369m0agj.jpg
a 6A driver makes the XM-L lightening
http://www.abload.de/img/imgp6374miyge.jpg
and now the special body is on my lathe
http://www.abload.de/img/imgp70237pbrq.jpg
http://www.abload.de/img/imgp70246czys.jpg
http://www.abload.de/img/imgp7040v1ztl.jpg
http://www.abload.de/img/imgp704666adi.jpg
the whole Flashlight
http://www.abload.de/img/imgp7035ppb49.jpg
http://www.abload.de/img/imgp7036awbpr.jpg
and a old Beamshot with only 200Klux:
http://www.abload.de/img/06sr90xm-lcmfc3.jpg
and the X21 with 7xXM-l to compare:
http://www.abload.de/img/07x21mod0vcrs.jpg
with the XM-L in the big reflector i reached 448.000 Lux :twothumbs
sorry for my bad english and best regards
Michael
As per my earlier PM, your images are too large and have been replaced with links Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm
Last edited by a moderator: