EDC Plus / IS X60L3 Triple LED P60 Dropin ( High CRI / Neutral White )

neutralwhite · Jan 29, 2013

do any modders have this drop in already ?.

also does one LED just give like 150 lumens if it was just on its own ?.
then there is a better reason to maybe have 3 right?.

thanks kindly...

EDCPlus/IS X60L3 Triple LED P60 Dropin (High CRI/Neutral White)

$74.99

EDCPlus and Illumination Supply have teamed up to bring you the X60L3, a triple LED dropin that is low on cost, but doesn't skip on an ounce of quality! The dropin was designed with the user in mind, and comes in a diffusor/head tool case, and even an AR lens to maximize the output from the dropin. Unlike competing dropins, the X60L3 has been tested in an integrating sphere and is compliant to the ANSI FL-1 test. The LEDs - 3 Nichia NVSL219AT-H1 , are being driven at 2A, and puts out an extremely efficient 465 High CRI lumens rare in such a small package. This is achieved by our custom LED board and full copper unibody construction. For eelctrical conductivity and appearance, we have also silver plated the copper.
Introductory Pricing! Use the coupon code: X60L315 to get 15% off from now till the end of January! (While supplies last)

Specs:

Powered by 3x Nichia NVSL219AT-H1 High CRI (92) 4500K (Neutral White)
Modes: 3 Mode (High, Medium, Low)
Current: 2A +/- 100mA
Input Voltage: 3-6v
Supported Cells: 1x18650/17670 Li-ion cells or 2x CR123 Primary Lithium cells. Do NOT use 2x RCR123/16340 Cells.
Dimensions--Length: 29mm (40mm with spring), Weight: 38g (1.3 oz)
Compatible with: SureFire P, C, Z,

Features:

Pure Copper with real silver electroplating for superior thermal and electrical conductivity
Triple XP-G2 Optic with up to 90% optical efficiency.
Reverse polarity input protection
Over-discharge protection ~2.75v (applies only to High and Medium modes)
Gold-plated spring
Linear current regulated. No PWM.
Thermally potted driver

Includes:

X60L3 Drop-in module
60DC (case, removal tool and wand)
28.5 x 2.9mm AR glass lens

This Dropin is OUT OF STOCK, eta 6 weeks.

https://illuminationsupply.com/edcp...d-p60-dropin-high-crineutral-white-p-320.html

mvyrmnd · Jan 29, 2013

It was only announced today, with a 6 week lead time. No one has one yet.

neutralwhite · Jan 29, 2013

hi blimey, ok, thanks, lol.
thought I was way behind..
btw,..if there was just one of those LED's in a flashlight would they already give over 400Lumens, or does it all matter on the driver?.
i thought because its 3, the LED output must be like 150L each.
thanks.

mvyrmnd said:
It was only announced today, with a 6 week lead time. No one has one yet.

mvyrmnd · Jan 29, 2013

Yes, the outputs would be 150 each. A single 219 would have to be driven extremely hard to get to 450 lumens.

By having 3 emitters at a lower current you get efficiency gains - you'd need to drive a single LED with more than 3 times the current to get to the same output.

neutralwhite · Jan 29, 2013

thanks for that.
appreciated.

mvyrmnd said:
Yes, the outputs would be 150 each. A single 219 would have to be driven extremely hard to get to 450 lumens.

By having 3 emitters at a lower current you get efficiency gains - you'd need to drive a single LED with more than 3 times the current to get to the same output.

S1LVA · Jan 29, 2013

Looks like you copied the text from the webpage before it was finished being created. Craig just announced over on the MP that the drop-ins are in stock.

S1LVA

KarstGhost · Jan 29, 2013

I've got one of these on the way! Will report back with impressions whenever I get it

twl · Jan 29, 2013

Anybody know if these EDC+ drop-ins will fit in a Malkoff or Elzetta host?

kyhunter1 · Jan 30, 2013

How is the fit of these in Surefire 6P hosts? Not really heard anybody mention it yet. I like the way Malkoff designed his with a small bezel gap to elimenate any electrical contact issues. I would hope this new module has the same fit.

neutralwhite · Jan 30, 2013

would a solarforce host come with a window?, seeing as the drop in is not the actual window.
does the drop in come with a window AR Lens?. Includes:

X60L3 Drop-in module
60DC (case, removal tool and wand)
28.5 x 2.9mm AR glass lens

thanks.

moshow9 · Jan 30, 2013

neutralwhite said:
would a solarforce host come with a window?, seeing as the drop in is not the actual window.
does the drop in come with a window AR Lens?. Includes:

X60L3 Drop-in module

60DC (case, removal tool and wand)

28.5 x 2.9mm AR glass lens

thanks.

Take another look at what you just posted being included.

mvyrmnd · Jan 30, 2013

All of this is irrelevant. The solarforce host has a glass window. If the dropin comes with an AR window, then SCORE - you get a nice little upgrade.

neutralwhite · Jan 30, 2013

thanks, and what happens then now to the solarforce window?.
ok to have two?.
easy to remove the Sforce window or leave it?.

mvyrmnd said:
All of this is irrelevant. The solarforce host has a glass window. If the dropin comes with an AR window, then SCORE - you get a nice little upgrade.

mvyrmnd · Jan 30, 2013

neutralwhite said:
thanks, and what happens then now to the solarforce window?.
ok to have two?.
easy to remove the Sforce window or leave it?.

Throw it in the bin / in a box / on ebay / eat it.

It's very easy to remove.

CM2010 · Jan 30, 2013

I think the lens that comes with it is to big for the solarforce.

mvyrmnd · Jan 30, 2013

CM2010 said:
I think the lens that comes with it is to big for the solarforce.

It's always possible. We'll find out in due course

I'm waiting for mine in the mail.

cland72 · Jan 30, 2013

kyhunter1 said:
How is the fit of these in Surefire 6P hosts? Not really heard anybody mention it yet. I like the way Malkoff designed his with a small bezel gap to elimenate any electrical contact issues. I would hope this new module has the same fit.

There is a gap like the malkoffs have

Sent from my PC36100 using Tapatalk 2

neutralwhite · Jan 30, 2013

what would you maybe suggest ?.
thanks.

no mention of solarforce re compatibility....

Specs:

Powered by 3x Nichia 219's R5's
Modes: 3 Mode (High, Medium, Low)
Current: 2A +/- 100mA
Input Voltage: 3-6v
Supported Cells: 1x18650/17670 Li-ion cells or 2x CR123 Primary Lithium cells. Do NOT use 2x RCR123/16340 Cells.
Dimensions--Length: 29mm (40mm with spring), Weight: 38g (1.3 oz)
Compatible with: SureFire P, C, Z,

CM2010 said:
I think the lens that comes with it is to big for the solarforce.

kyhunter1 · Jan 30, 2013

Thanks for the info.

cland72 said:
There is a gap like the malkoffs have

Sent from my PC36100 using Tapatalk 2

Norm · Jan 30, 2013

cland72 said:
There is a gap like the malkoffs have

I suspect the smaller aperture of the Malkoff is going to obscure part of the beam.

Norm

EDC Plus / IS X60L3 Triple LED P60 Dropin ( High CRI / Neutral White )

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Enlightened

Enlightened

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Enlightened

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Retired Administrator

Similar threads