bubblevisor
Newly Enlightened
- Joined
- Feb 7, 2013
- Messages
- 1
This is my first post! I'm hoping to modify a 3 x xml light intended for a bicycle to to suit running off a 12v supply from my motorcyle - my Ducati headlights are awful!
Can someone give me some advice on a suitable driver? It needs to switch onto full power on first click rather than cycle through all the unwanted modes? Also would I need a resistor to reduce the input voltage? Below is a link to the ebay light I purchased. I'll be massively grateful for any advice. thanks!
http://www.ebay.co.uk/itm/3x-CREE-X...ycling_Bike_Lights&hash=item1e75e06001&_uhb=1
Can someone give me some advice on a suitable driver? It needs to switch onto full power on first click rather than cycle through all the unwanted modes? Also would I need a resistor to reduce the input voltage? Below is a link to the ebay light I purchased. I'll be massively grateful for any advice. thanks!
http://www.ebay.co.uk/itm/3x-CREE-X...ycling_Bike_Lights&hash=item1e75e06001&_uhb=1