Identify TIR optic

VegasF6

Flashlight Enthusiast
Joined
Dec 5, 2007
Messages
1,449
Location
Las Vegas
Hi, found half a dozen of these in one of my cabinets and forgot to label them.
I am pretty sure they are XML optics that I bought from ledgroupbuy or perhaps reefsupply or one of the other places associated with aquariums. Or perhaps ledsupply, I dunno. No one seems to have them anymore.
Either the seller or better still the manufacturer with datasheet would be excellent.

They are about 18.5 - 19mm wide at the widest point, which is a lip that probably snaps into a holder that I don't have. 9mm high.

78947BA6-6AB9-4FAF-B9CD-34079B117988-655-0000013C2F195A05_zps04bd6522.jpg


The first pic doesn't show the straight walls.
93CBB7FF-3393-4212-AE8E-64006029F798-655-0000013DB5D7D61A_zps135d752c.jpg
 
Last edited:

VegasF6

Flashlight Enthusiast
Joined
Dec 5, 2007
Messages
1,449
Location
Las Vegas
It looks a lot like a Gaggione optic, and I did have some other stuff from Cutter I didn't label, but I am not quite sure.
It may be the same one this thread listed as LLS01.
http://www.cpfmarketplace.com/mp/sh...es-reduced-lux-rc-baord-triple-XPE-XML-optics


*edit*
Ok think I got it. It is the Gaggione LLC01S offered by cutter and it is already in a holder, it's a clear holder and I thought it was all one piece.
Thanks guys!
 
Last edited:
Top