emmanhello
Newly Enlightened
Emman's 1000 lumens UltraFire WF-C6S XM-L2 T6
Hi everyone,
I've modded one of my flashlight and when I did a thread about it, people where interested from buying it. So I did this post to see how many piece I should buy to make others flashlight like this and sell them to interested people.
Introducing the smallest 1000 lumen ''burst'' flashlight ever (bit of exaggeration here,) this is the brightest flashlight I've ever done.
Using a UltraFire WF-C6S which is almost as small as a 18650 battery:
(this one is 4 years old used, you will get a new one)
a XM-L T6 led: -->I will now put a XM-L2 T6 instead, it is 20% more efficency! output up to 1052 lumens!!
and the most powerful driver that I found that could fit: KD 3040ma driver.
It wouldn't be this powerful without this IMR16340 NiMn battery capable of delivering continuously 4.4 amps!
The KD driver as many programmable mode:
Runtime is great, you'll get 23 minutes of runtime at high mode, 1h10min at med and 12-13 hours at low mod. (TESTED IN REAL LIFE)
Hi: 3000mA, Med: 1000mA and lo: 50mA
This flashlight is THEORETICALLY 1000 lumens burst (I don't have tool to measure total lumen output,) 1000 lumens because it draw 3000mA at the tail of the flashlight and burst because it last at least 45 seconds. Don't expect 1000 lumen for 23 min, this is impossible! 3000mA last 45 sec then the amperage normally goes down hill, as you see in this graph.
Heat generated from XM-L T6 is pretty high but this flashlight handle it great:
Comparison pictures!!!
I compared luminosity with (left to right)
-big UltraFire 9T6 (9x XM-L T6) 9000 lumens rated...(actual is 3717) Cost me about 150$ with 3x keygos 26650 4800mah
-UltraFire WF-501b XM-l T6 800 lumen rated with 2.5 a driver and a 3100mah panasonic 18650
-Moded UltraFire XG-V2 with a 2.8a driver and another panasonic 3100mah 18650
Details:
Practical flashlight holster for belt included!!
PRICE:
Modded flashlight with holster: 40$
I will now put XM-L2 T6 Led for +1$: 41$ (obsolete)
NEW modded flashlight XM-L2 T6 (Tint: 3A) for 45$
Add 9$ per battery. Must have this model or a good li-ion NiMn battery, otherwise you will have a dimmed output.
Charger not included and buyer will pay shipping
Estimated shipping:
9.80$ to U.S.
11.80$ to worldwide
If you are interested in having one, send me a PM with the number of batteries and the programmable output you want.
Programmable output:
Personnaly, I love the XXX mode with memory disabled.
Feel free to ask me any question!
This post took hours to make!!!:hairpull: If you see something wrong, tell me please!!! My native language is french....
Congrats if you read all this post:kiss:
Trying to make a table...
I forgot to mention that I only accept Paypal.
ALL SOLD!!!
That was it guys! Thanks for your patience and do not worry, there'll be more soon, in a few months.
Hi everyone,
I've modded one of my flashlight and when I did a thread about it, people where interested from buying it. So I did this post to see how many piece I should buy to make others flashlight like this and sell them to interested people.
Introducing the smallest 1000 lumen ''burst'' flashlight ever (bit of exaggeration here,) this is the brightest flashlight I've ever done.
Using a UltraFire WF-C6S which is almost as small as a 18650 battery:
(this one is 4 years old used, you will get a new one)
a XM-L T6 led: -->I will now put a XM-L2 T6 instead, it is 20% more efficency! output up to 1052 lumens!!
and the most powerful driver that I found that could fit: KD 3040ma driver.
It wouldn't be this powerful without this IMR16340 NiMn battery capable of delivering continuously 4.4 amps!
The KD driver as many programmable mode:
Runtime is great, you'll get 23 minutes of runtime at high mode, 1h10min at med and 12-13 hours at low mod. (TESTED IN REAL LIFE)
Hi: 3000mA, Med: 1000mA and lo: 50mA
This flashlight is THEORETICALLY 1000 lumens burst (I don't have tool to measure total lumen output,) 1000 lumens because it draw 3000mA at the tail of the flashlight and burst because it last at least 45 seconds. Don't expect 1000 lumen for 23 min, this is impossible! 3000mA last 45 sec then the amperage normally goes down hill, as you see in this graph.
Heat generated from XM-L T6 is pretty high but this flashlight handle it great:
Comparison pictures!!!
I compared luminosity with (left to right)
-big UltraFire 9T6 (9x XM-L T6) 9000 lumens rated...(actual is 3717) Cost me about 150$ with 3x keygos 26650 4800mah
-UltraFire WF-501b XM-l T6 800 lumen rated with 2.5 a driver and a 3100mah panasonic 18650
-Moded UltraFire XG-V2 with a 2.8a driver and another panasonic 3100mah 18650
Details:
| Brand: | UltraFire |
| Model: | WF-C6S |
| Emitter Brand/Type: | Cree |
| Emitter BIN: | XM-L T6 |
| Color BIN: | White |
| Total Emitters: | 1 |
| Battery Configurations: | 1 x CR123A/1 x 16340 Ii-on battery |
| Voltage Input: | 2.5~4.5V max |
| Switch Type: | Clicky (Clickie), Glow-in-the-Dark/GITD |
| Switch Location: | Tailcap (Tail-cap) |
| Modes: | (Programmable) up to 10 |
| Mode Memory: | Toggleable Memory |
| Mode Arrangement: | Programmable |
| Circuitry: | Digital Regulated 3040mA Current Output |
| Brightness: | 1000 lumens max burst (theoretically rated) for 45 sec |
| Runtime: | Hi: 23 Minutes, Med: 70 Minutes, Lo: 12-13 Hours |
| Lens: | Coated Glass Lens |
| Reflector: | Aluminum Textured/OP Reflector |
| Holster: | Included |
| Carrying Strap: | Strap Included |
| Other Features: | Stainless steel finished |
| Modded by: | emmanhello  |
Practical flashlight holster for belt included!!
PRICE:
Modded flashlight with holster: 40$
I will now put XM-L2 T6 Led for +1$: 41$ (obsolete)
NEW modded flashlight XM-L2 T6 (Tint: 3A) for 45$
Add 9$ per battery. Must have this model or a good li-ion NiMn battery, otherwise you will have a dimmed output.
Charger not included and buyer will pay shipping
Estimated shipping:
9.80$ to U.S.
11.80$ to worldwide
If you are interested in having one, send me a PM with the number of batteries and the programmable output you want.
Programmable output:
Personnaly, I love the XXX mode with memory disabled.
Feel free to ask me any question!
This post took hours to make!!!:hairpull: If you see something wrong, tell me please!!! My native language is french....
Congrats if you read all this post:kiss:
Trying to make a table...
| List of buyer: | qty: | Led: | Flashlight body: | Battery Qty: | Mode arrangement: | Order statut |
| Arm and Leg | 2 | XM-L2 T6 | WF-C6S | 2 | X0X w/ memory | No payment, transaction canceled |
| gbsbg | 1 | XM-L2 T6 | WF-C6S | 2 | 0X0 w/ memory | Shipped!!!! 
|
| JJKTWO | 1 | XM-L2 T6 | WF-C6S | 2 | 0X0 w/ memory | Shipped!!!!
|
| jsanders1974 | 1 | XM-L2 T6 | WF-C6S | 1 | XXX no memory | Shipped!!!!
|
| jmpaul320 | 1 | XM-L2 T6 | WF-C6S | 2 | 0X0 w/ memory | Shipped!!!!
|
| gwalsh | 1 | XM-L2 T6 | WF-C6S | 1 | X0X no memory | Shipped!!!!
|
| scsmith | 1 | XM-L T6 | Used WF-C6S | 2 | 00X no memory | Shipped!!!!
|
| scsmith | 1 | XM-L2 T6 | WF-C6S | 0 | 0X0 no memory | Shipped!!!!
|
| euroken | 1 | XM-L2 T6 | 18350 MarsFire | 0 | 0X0 no memory | Shipped!!!!
|
| fredx | 2 | XM-L2 T6 | WF-C6S | 4 | 0X0 w/ memory | Shipped!!!!
|
| stevenkelby | 1 | XM-L2 T6 | WF-C6S | 0 | XXX no memory | Shipped!!!!
|
| KuanR | 1 | XM-L2 T6 | WF-C6S | 0 | XXX no memory | Shipped!!!!
|
| b8llzblue | 1 | XM-L2 T6 | WF-C6S | 0 | 0X0 w/ memory | Shipped!!!!
|
| greatscoot | 1 | XM-L2 T6 | WF-C6S | 0 | 0X0 no memory | Shipped!!!!
|
| slow2go | 2 | XM-L2 T6 | WF-C6S | 0 | X00 no memory | Shipped!!!!
|
I forgot to mention that I only accept Paypal.
ALL SOLD!!!
That was it guys! Thanks for your patience and do not worry, there'll be more soon, in a few months.
Last edited:
