nailbender
Flashlight Enthusiast
Solid Copper Mule D26 / P60 Mules in XML2 / XPG2/XPE2 / Nichia 219
These are solid copper mule D26 / P60 complete modules.
We will offer these in XML2 / XPG2 / and Nichia 219
Triples are in XPG2 / XPE2 / and nichia only.
These are the same heat sinks that Donn just sold but are completed modules only and they are milled perfect. They are hard to work with (gloves) to keep perfect but they look great.
The 90 cri XML2 in the picture is a perfect paring with these mules. The triple XPG2's in the picture are 3D's
ON a side note
XML2 / XPG2 / Nichia singles are all on 20mm all copper direct bond Sinkpads.
Triple XPG2's / XPE2 / Nichia's are built on Aluminum parallel boards.
Tints available are below
XML2
coolwhite U2 flux 1C
Neutral T6 flux 3C
Neutral T5 flux 5B4
Warm white 90cri S6 flux
_______________________________________________________________________
XPG2
Coolwhite S2 flux 2B
Neutral R5 flux 3D
warm white 90 cri
_______________________________________________________________________
XPE2
Coolwhite R3 flux 1D tint
Neutral R2 fLux 5B4 tint
Red / Green / blue also
________________________________________________________________________
Nichia 219 B10 flux 4500k neutral
________________________________________________________________________
Drivers are the same drivers I am using in the other threads.
All have last level memory.
Levels are 1 / 3 low med high / 4 moonlight , low , med , high
XML2's are driven at 3 amps / XPG2's and Nichia's driven at 1.8 amps / triples are driven at 4.2 amps
________________________________________________________________________
Prices are below and include shipping in US. We do ship International, 1st class Int is $12
XML2 / XPG2 / Nichia mules are $85
Triple XPG2 / Triple Nichia mules are $100
Paypal is in my Bio
Thanks
These are solid copper mule D26 / P60 complete modules.
We will offer these in XML2 / XPG2 / and Nichia 219
Triples are in XPG2 / XPE2 / and nichia only.
These are the same heat sinks that Donn just sold but are completed modules only and they are milled perfect. They are hard to work with (gloves) to keep perfect but they look great.
The 90 cri XML2 in the picture is a perfect paring with these mules. The triple XPG2's in the picture are 3D's
ON a side note
Donn has tried these in about 2 dozen different hosts, and the only ones they don't fit are Moodular C-Series adapters and one of his older round-body 6P tubes. However, a tiny bit of sanding solved the fit quite nicely. They are much more snug than most drop-in bells, and should require no foil or tape to have optimal heat transfer.
XML2 / XPG2 / Nichia singles are all on 20mm all copper direct bond Sinkpads.
Triple XPG2's / XPE2 / Nichia's are built on Aluminum parallel boards.
Tints available are below
XML2
coolwhite U2 flux 1C
Neutral T6 flux 3C
Neutral T5 flux 5B4
Warm white 90cri S6 flux
_______________________________________________________________________
XPG2
Coolwhite S2 flux 2B
Neutral R5 flux 3D
warm white 90 cri
_______________________________________________________________________
XPE2
Coolwhite R3 flux 1D tint
Neutral R2 fLux 5B4 tint
Red / Green / blue also
________________________________________________________________________
Nichia 219 B10 flux 4500k neutral
________________________________________________________________________
Drivers are the same drivers I am using in the other threads.
All have last level memory.
Levels are 1 / 3 low med high / 4 moonlight , low , med , high
XML2's are driven at 3 amps / XPG2's and Nichia's driven at 1.8 amps / triples are driven at 4.2 amps
________________________________________________________________________
Prices are below and include shipping in US. We do ship International, 1st class Int is $12
XML2 / XPG2 / Nichia mules are $85
Triple XPG2 / Triple Nichia mules are $100
Paypal is in my Bio
Thanks
Last edited:
, nice chunk of copper:thumbsup:. tight fit:thumbsup:
