My flashlight Information Sheet

Not sure if this is helpful but it has all the info that I look at!
I have it all on one sheet and keep a copy at home, work and on my phone.
It usually prints out straighter than below I had to put the underscores in as the tabs kept getting removed.




HDS ____________________________________________SPY007
Option Menu: _________________________________________• PU1 is to select the configuration. (1 of 4)
<long flash> Turn On Preset ______________________________ • PU2 is the lock; same as in the 007
<three rapid flashes> Button Lock (BL) ______________________• PU3 is the calibrate; same as in the 007
<bright-to-dim-ramp> Automatic Turn Off ___________________ • PU4 is the light engine programming
<dim flash> Locator Flash ________________________________ • PU5 is the power level report
<long flash, short flash> Momentary (M) _____________________• PU6 is the battery meter; same as in the 007
<brighter-dimmer> Burst
<dim-to-bright-ramp> Disable customization (Cust)
Reset, 20-click, PHR Enable customization (Cust)

LF2XT ___________________________________________________ LF3XT
3C Temporary disable Auto Off
3C + PH To setting mode ____________________________________Setting mode entry
4C Toggle Tactical __________________________________________Toggle Tactical
4C + PH Toggle ODP ________________________________________Function setting mode entry
5C Battery Voltage Report ____________________________________Battery Voltage Report
5C + PH To FUI ____________________________________________To FUI
6C + PH To mode Number select
7C + PH Toggle Memory
8C + PH Toggle Auto Off
10C + PH Restore Factory Settings

BATTERY CHARGING

that's a good idea to have a info sheet like that

Feel free to add to it !

just out of curiosity, are you sure 18650 can be charged on 4.5A? I've read somewhere that only 3400MaH 18650s can be charged on 2A and the rest at 1.5 or less. I might be wrong though

I will have to check that ... None of mine have blown up I must admit?!