WTS: # 1 Must Have K40vn Thrower (New Batch) $150 No Box Option

Icehole said:

K40vn


Batch 1 Here:
http://www.cpfmarketplace.com/mp/sho...-The-Pre-order


Batch 2 Here:
http://www.cpfmarketplace.com/mp/sho...rower-Batch-2- XML2 6500K Dedome 1800 LED Lumen (Factory 3-3.5A will be raised to 6.5A) (tint will look like 5000K after dedome)


Batch 3 Here:
http://www.cpfmarketplace.com/mp/sho...UST-HAVE-LIGHT


$160 Shipped USA With box. International + $20 without box or $27 with box




Mod details


- About 380K-430K Lux
- About 1450-1650 Lumen Out The Front Lumen
- Thick direct copper bonding
- Premium Thermal Compound
- Larger LED
- Larger Positive Spring
- All current connection touch up
- Battery carrier tweak
- Tune for most intense hot spot focus
- Expect very intense hot spot and generous side spill.
- The first 3 mode in the UI will be very close to factory. The next three mode will be brighter than factory.
- Runs very hot on the 6th mode or Max brightness. On extended run turn the light down a few clicks
- You can run the light as long as it gets too hot to hold.
- If you prefer the dome on let me know.
- If you prefer a different LED tint there is a $15 charge
- High sensitivity boot color in GITD Green/Blue/GITD LightBlue and/or "V54" Stamp on your light = $5


15 in stock ready to ship. Possibly the last 15 to be sold.


1) ArTyOmE
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15

Click to expand...

foxxkat said:

hey vinh what is the led for this K40? i see supbeam site there are few types. i think they have new version using xm-L2. are you changing all the leds too?

Click to expand...

foxxkat said:

nice. can you confirm if the modified battery carrier can still fit a long protected cell? like 69.5mm long.

Click to expand...

foxxkat said:

i will take slot#2, dedome
Unique Transaction ID 22N81976MR525484R

i saw you mentioned "can permanently seal the light like surefire" in your batch 1 thread. What does it mean to users? what cannot be opened again if sealed permanently?

Click to expand...

InfinitusEquitas said:

Why not just a very small amount of loctite... enough so it's not opened by accident, but not enough so it's still fairly easy to open on purpose.

I believe o rings shoudl be lubed or replaced every once in a while. I only glue things when its a must.

Click to expand...

mudjunky said:

Can't wait to jump on this.

Click to expand...