Sold/Expired LED tower module for Surefire turbohead.

LED tower module for Surefire Turbohead. KT1,2,4 M3T, M4, M6

->PTFE 28AWG silver coated single copper conductor
->brass heatsink
->AX2002(XP-G2), AX2003(XM-L,XM-L2) single mode
->Ld-25 circuit 3/5 mode for one 3.7v li-ion battery
->use from one 3.7v li-ion battery to four 3.7v li-ion batteries
->5W(XP-G2) 10W(XM-L, XM-L2) full output.
->Copper mcpcb (second version)
--------------------------------------1st.--------------------------------------------------------------
1. XM-L U2 1A 2ea $72 (each) SOLD
2. XM-L2 T5 5C1 4000K 1ea $72 SOLD
3. XM-L2 S6 7D3 2900K 90+ CRI 2ea $72 (each) SOLD
4. XP-G2 S2 1C 1ea $65 SOLD
(XP-G2 has scratch on led dome, but working good and beamshot is nice.)
---------------------------------------2nd.-------------------------------------------------------------
5. XM-L2 U2 1A LD-25 (3/5 modes) $72 1ea SOLD
6. XM-L U2 1C LD-25 (3/5 modes) $72 $60 SOLD
7. XM-L2 S6 2900K 90+ CRI AX2003 (1 mode) $72 $60 1ea SOLD
(No.5~7 modules were tested about 1 hour)
----------------------------------------------------------------------------------------------------

* tail cap current test *
It was calculated by my multimeter.
Actual data is below.

------------------------two unprotected Panasonic 2900mAh cells---------------------
XP-G2 7.57v*0.607A = 4.59W
XM-L2 7.56v*1.293A = 9.78W

------------------------four Surefire SF123 cells--------------------------------------------
XP-G2 10.82v*0.464A = 5.02W
XM-L2 11.17v*1.07A = 11.95W

------------------------four 3.7v Soshine 16340 700mAh cells------------------------------
XP-G2 15.27v*0.331A = 5.05W
XM-L2 15.26v*0.737A = 11.25W


http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15086_zpsac7929c4.jpg

http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15087_zpse4960cc0.jpg

http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15065_zpsc17c6c7e.jpg

http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15066_zps27d134cc.jpg

http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15063_zps9cfb8e01.jpg

http://i1354.photobucket.com/albums/q690/shrike3612/D06CAE30BCC0D658_SDC15064_zps18e0388d.jpg


from left, XM-L2 S6, XM-L2 U2 1A, XM-L U2 1C


AX2003 circuit vs. LD-25 circuit


Protect tubes




XM-L2 S6 2900K vs. XM-L U2 1C


XM-L2 S6 2900K vs. XM-L2 U2 1A




Shipping cost $5
Registered airmail shipping to worldwide with flat rate. Partially tracking service. No insurance.
Paypal only.

Send PM first.

I'll take one of these: 1. XM-L U2 1A 2ea*$72*(each).

PM sent.

socom1970 said:

I'll take one of these: 1. XM-L U2 1A 2ea*$72*(each).

PM sent.

Click to expand...

PM replied.

I'll take. #2 & #3!

Are primaries ok?

dbleznak said:

I'll take. #2 & #3!

Are primaries ok?

Click to expand...

PM replied.

:thanks:

:thanks:
Kim.

socom1970 said:

:thanks:

Click to expand...

Hey Kim, these looks great! Any chance of you making these for the regular SF M3 / Z46 bezel? I would love an XM-L2 in that setup.

Fyi, based on the following thread in CPF MP, there seems to be quite a bit of interest in LED dropins for M3 / Z46 setups. http://www.cpfmarketplace.com/mp/sh...-Veleno-Designs-M3-Tower-Modules-Now-in-Stock!

Thanks for link.

I want to make a tower module for M3/Z46. If I take a M3 or Z46 head someday, I will make it.


Kim.

RGB_LED said:

Hey Kim, these looks great! Any chance of you making these for the regular SF M3 / Z46 bezel? I would love an XM-L2 in that setup.

Fyi, based on the following thread in CPF MP, there seems to be quite a bit of interest in LED dropins for M3 / Z46 setups. http://www.cpfmarketplace.com/mp/sh...-Veleno-Designs-M3-Tower-Modules-Now-in-Stock!

Click to expand...

I will take the last XM-L2 S6 7D3 2900K 90+ CRI

Pm sent.

PM replied.

slingsy said:

I will take the last XM-L2 S6 7D3 2900K 90+ CRI

Pm sent.

Click to expand...

Will you be making anymore towers with XM-L2s in 4000k??

I will let you know when I make it.

Fusion_m8 said:

Will you be making anymore towers with XM-L2s in 4000k??

Click to expand...

shrike2222 said:

I will let you know when I make it.

Click to expand...

Count me in aswell!

slingsy said:

Count me aswell!

Click to expand...

+1 for me too.... and since we are having Christmas wish list, can I have at least 2 modes please.... low low and blindingly bright. 3 would be ideal really....

Can it be optimised to run on 1 li-ion because I've got a parallel 3 x 18650 M6 body that's really really really lonely....

Well, I will think about it.

Thanks for your interest!
Kim.

Tessaiga said:

+1 for me too.... and since we are having Christmas wish list, can I have at least 2 modes please.... low low and blindingly bright. 3 would be ideal really....

Can it be optimised to run on 1 li-ion because I've got a parallel 3 x 18650 M6 body that's really really really lonely....

Click to expand...

I am interested if you make some more neutral warm xml or xpg towers

Last module offer

XP-G2 is $60 + shipping.

thanks
Kim.

I got 2 towers from you. THESE ARE BRILLIANT. The beam culmination on the KT4 is just mind-blowing. Thanks so much. The XM-L2 T4 5C1 is my favorite emitter right now. What a great way to re-discover Surefire M3s and more

Is this still available? 1. XM-L U2 1A 2ea (one left) $72 (each)