WTS: XsearcherVN & NightMasterVN - Dedicated Aspheric Throwers

XsearcherVN & NightMasterVN - Dedicated Aspheric Throwers

Must Read & Agree Before Purchase: Click Here







Possible Mod Details. (To be updated and finalized)
- I have modded both of these lights before less aggressively yet with excellent results
- LED on Copper
- If space allows: 2-3 special prepared copper disk added
- If space allows: Solder fill inside of light engine
- Large silicone wires
- Special prepared springs for best current transfer and recoil absorbtion
- Impact resistance for recoil added
- Switch verified for best operation and touch up solder connections and clean
- Tune for best focus
- High grade Arctic Silver instead of Arctic Alumina to permanent bonding locations
- Thermal paste between Light Engine and Body
- High Drain Sony VT4C 18650 Strongly Recommended!!!!


Please Options Below
LED & Driver Options (2.5-6V, 18650 recommended)
B. XPG2 6500K Dedome 5A
D. XML2 6500K Dedome 6-7A

Mode Options
1) Single Mode - A brighter than above 5-5.4A
2) High-Low with no mode memory. High = Direct Drive at about 5-5.2A for XPG2, and 6-7A for XML2

XsearcherVN
($208 XPG2, $288 SBT-70 Round Die)

$15 for International (Outside of USA) Shipping
+ $5 for "V54" hand engraved on light

If you want Shipping Insurance Please Ask

PM or email me for payment instructions.
Email: [email protected]

With the success of your previous aspheric, I'm very much looking forward to see the success of this. Should be a huge hit.

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

climberkid said:

With the success of your previous aspheric, I'm very much looking forward to see the success of this. Should be a huge hit.

Click to expand...

I am debating XPE2 at 3.5A or XPG2 at 5A...We will see

If you've got a good diameter lens why not go for the XPG2. But if it's smaller the XPE2 will pack a punch too with a good heatsink.

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

climberkid said:

If you've got a good diameter lens why not go for the XPG2. But if it's smaller the XPE2 will pack a punch too with a good heatsink.

Click to expand...

Yah I am also thinking about mounting the LED on 3-4 layers of modified copper heat sink base to help with the immediate heat bottle next.

Might even try the more expensive Arctic Silver instead of the Arctic Alumina. Heard Silver conduct heat very well. ;-)

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

I suggest a dedicated aspheric thrower earlier today and now this. Talk about fast response time! lol Really looking forward to this light!

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

Hoo Boy! Gonna bust my flashlight budget for 2014! Wonder if this could be attached to a picatinny rail on a .50 cal single shot AR upper.


Believe it or not, I really find that I use aspherics a lot, especially when I want to see whether that dark shadow skulking around is a cat, fox, coyote or raccoon without blasting a wall of light into everybody's windows. Sadly my Dereelight hit concrete and cracked so I'm in the market for a new one.

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

I think xpg2 as well so that the spot is a usable size and with more lumens

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

stevo250 said:

I think xpg2 as well so that the spot is a usable size and with more lumens

Click to expand...

Agree I am always more concern with usability vs Lux numbers

But who knows a 5A XPG2 might has the same surface brightness as a XPE2 ...

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

vinhnguyen54 said:

Agree I am always more concern with usability vs Lux numbers

But who knows a 5A XPG2 might has the same surface brightness as a XPE2 ...

Click to expand...

I think they would be close. I seem to remember reading somewhere about an xsearcher with dedomed XPG2 at about 3 amp producing ~350k lux so I think it could hit 500klux
would 5A XPG2 be direct drive or current regulated?

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

stevo250 said:

I think they would be close. I seem to remember reading somewhere about an xsearcher with dedomed XPG2 at about 3 amp producing ~350k lux so I think it could hit 500klux
would 5A XPG2 be direct drive or current regulated?

Click to expand...

regulated

I put an xpg2 dedomed on sinkpad in my xsearcher with standard xml driver and it out throws everything I have. 5amp would be insane, heatsink would want to be substantial in such a narrow body!

Sent from my SM-N9005 using Tapatalk

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

This is cool to see you are going to experiment with the Dereelight. I would suggest that you also get some of these to increase performance, too. They have an advertisement banner right here on CPF. http://www.wavien.com/shop/rlt-collars/rlt-collar/

Hi vihn dereelight have a new small aspheric Nm400 36000cd think u could do something with it .......

Sent from my Hudl HT7S3 using Tapatalk

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

lightmyfire13 said:

Hi vihn dereelight have a new small aspheric Nm400 36000cd think u could do something with it .......

Sent from my Hudl HT7S3 using Tapatalk

Click to expand...

I have doubts that the little aspheric one can match my z6vn.

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

Would the XsearcherVN have low med high modes?

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

stevo250 said:

Would the XsearcherVN have low med high modes?

Click to expand...

Moonlight and Turbo too if you want. LOL

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

vinhnguyen54 said:

Moonlight and Turbo too if you want. LOL

Click to expand...

I do like my moonlight super throwers

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

i had a 3amp xpe2 pill made by vinh that did 300klux

xpg2 would probably be around 400-500k at 5amps

if you got a wavien collar you would see 700+ easy

Re: WTS: XsearcherVN - Dedicated Aspheric Thrower

Everyone is talking abtou this waiven collar. Do you guys think it would work in the Xsearcher?