gunga
Flashaholic
>> All Sold << WTS: Catch n Release sale, TNC SF kit, Aleph head, Eagletac D25C
Hey all, this is a catch and release for me. I just got these parts recently. I think they are very cool and would love to mod them to the max. Unfortunately, I'm moving, I need to get a full time job, and I need to pack (for the aforementioned move) as well as mod other stuff. So I have neither the time nor full desire for this project, so I'm passing on these fine parts. They are as they came, mint, or near mint. All in awesome condition. I'm sure if you look hard you can find imperfections so I will not claim mint, but they are in very good shape.
So here are the details.
First is a TNC SF series kit. The bodies and heads all work together. The tails are e-series compatible too, so you can mix and match there if you like, but the heads are not compatible with any other system. All parts are nice natural hard anodized. Color matching varies. The shrouded tails use McClickeys, though the exposed tail is a press momentary/twist to lock design.
The lights consist of the tail, body tube, collar, and head with reflector etc. The collar holds the light engine/pill. If you have access to TNC parts etc, you can get collars that fit Aleph heads if you want to get more Lego-tastic.
The light engine/pill uses 14mm circuits, the same size as McGizmo/Aleph, so if you have a circuit that fits either of those pills, it will fit here. I will even include a 50/500 mA Goldserve piglet (not shown) for you to start with.
So, in this kit, you get:
- 2x complete lights. Light 1 is AA with shrouded tail, 20mm head, and TNC AA circuit with Luxeon. This is single level but can be upgraded etc. Light 2 is 18650 with 27mm head, shrouded tail, and single level Flupic (specially programmed?) with cree XRE. Again this can be upgraded. Put the 20mm head on the 18650 light and you have the smallest 18650 light I have ever seen!
- 2x extra bodies, 2 extra unanodized collars. The bodies are CR123 and CR2.
- 1x extra tail. This is a press momentary, twist lock design. The button is exposed. I think you can just swap out the guts and add a McClicky if you want another clicky tail.
- 1x extra pill. Can add a circuit and LED of your choice. Fits 14mm circuits.
- 1x pill tool. A TNC tool to remove the pill from the collars.
- 1x 50/500 Piglet circuit. I believe this is a 50/500mA board. Details here: http://www.candlepowerforums.com/vb/showthread.php?157776-Finally-Piglet-boards-for-sale
So this is 2 full custom lights with 2 extra bodies, and extra pill and circuit and extra tailcap.
All for $140 $135 $130 $115
>> SOLD << Paypal to USA. International add $5.
-------------
EDIT:
I also have a fresh Eagletac D25C (2013 model, keeps modes with RCR123) modded with a Neutral XML2 (T6 4C) on a copper direct thermal board. It is in great shape and really kicks out a lot of output on IMR123.
I will sell this for $40 with the TNC kit ($60 without).
>> SOLD <<
----------
Next up is a Titanium Aleph A19 head. I think it was from Morelite originally, but I'm unsure. I wanted this for my McGizmo AA body but it doesn't look quite right. So it's for sale. Condition is near mint/mint. The reflector is an MCr19XR and seems to have a few smudges at the edges. It does not affect the beam and is how I received it. The light engine is a single level Cree XRE Q4. Quite bright, great throw. Prime for modding too.
This is $155 $150 >> SOLD << Paypal to USA. International add $5. I'm not making a profit, I just had to pay extra for shipping and want to come close to breaking even.
I'm not responsible for Postal Mishaps after I drop it off at the Post Office.
Here's all that is for sale.
The 18650 light vs a McGizmo AA Haiku (which is NOT for sale).
The 3 tails, please excuse the dust.
2 heads are better than 1!
The TNC Family. All this for $140?!
The Aleph A19 Ti head
Another view
And another.
The Kit and the head again.
Hey all, this is a catch and release for me. I just got these parts recently. I think they are very cool and would love to mod them to the max. Unfortunately, I'm moving, I need to get a full time job, and I need to pack (for the aforementioned move) as well as mod other stuff. So I have neither the time nor full desire for this project, so I'm passing on these fine parts. They are as they came, mint, or near mint. All in awesome condition. I'm sure if you look hard you can find imperfections so I will not claim mint, but they are in very good shape.
So here are the details.
First is a TNC SF series kit. The bodies and heads all work together. The tails are e-series compatible too, so you can mix and match there if you like, but the heads are not compatible with any other system. All parts are nice natural hard anodized. Color matching varies. The shrouded tails use McClickeys, though the exposed tail is a press momentary/twist to lock design.
The lights consist of the tail, body tube, collar, and head with reflector etc. The collar holds the light engine/pill. If you have access to TNC parts etc, you can get collars that fit Aleph heads if you want to get more Lego-tastic.
The light engine/pill uses 14mm circuits, the same size as McGizmo/Aleph, so if you have a circuit that fits either of those pills, it will fit here. I will even include a 50/500 mA Goldserve piglet (not shown) for you to start with.
So, in this kit, you get:
- 2x complete lights. Light 1 is AA with shrouded tail, 20mm head, and TNC AA circuit with Luxeon. This is single level but can be upgraded etc. Light 2 is 18650 with 27mm head, shrouded tail, and single level Flupic (specially programmed?) with cree XRE. Again this can be upgraded. Put the 20mm head on the 18650 light and you have the smallest 18650 light I have ever seen!
- 2x extra bodies, 2 extra unanodized collars. The bodies are CR123 and CR2.
- 1x extra tail. This is a press momentary, twist lock design. The button is exposed. I think you can just swap out the guts and add a McClicky if you want another clicky tail.
- 1x extra pill. Can add a circuit and LED of your choice. Fits 14mm circuits.
- 1x pill tool. A TNC tool to remove the pill from the collars.
- 1x 50/500 Piglet circuit. I believe this is a 50/500mA board. Details here: http://www.candlepowerforums.com/vb/showthread.php?157776-Finally-Piglet-boards-for-sale
So this is 2 full custom lights with 2 extra bodies, and extra pill and circuit and extra tailcap.
All for $140 $135 $130 $115
>> SOLD << Paypal to USA. International add $5.
-------------
EDIT:
I also have a fresh Eagletac D25C (2013 model, keeps modes with RCR123) modded with a Neutral XML2 (T6 4C) on a copper direct thermal board. It is in great shape and really kicks out a lot of output on IMR123.
I will sell this for $40 with the TNC kit ($60 without).
>> SOLD <<
----------
Next up is a Titanium Aleph A19 head. I think it was from Morelite originally, but I'm unsure. I wanted this for my McGizmo AA body but it doesn't look quite right. So it's for sale. Condition is near mint/mint. The reflector is an MCr19XR and seems to have a few smudges at the edges. It does not affect the beam and is how I received it. The light engine is a single level Cree XRE Q4. Quite bright, great throw. Prime for modding too.
This is $155 $150 >> SOLD << Paypal to USA. International add $5. I'm not making a profit, I just had to pay extra for shipping and want to come close to breaking even.
I'm not responsible for Postal Mishaps after I drop it off at the Post Office.
Here's all that is for sale.
The 18650 light vs a McGizmo AA Haiku (which is NOT for sale).
The 3 tails, please excuse the dust.
2 heads are better than 1!
The TNC Family. All this for $140?!
The Aleph A19 Ti head
Another view
And another.
The Kit and the head again.
Last edited: