Sky Lumen        
Page 3 of 3 FirstFirst 123
Results 61 to 80 of 80

Thread: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

  1. #61

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    I just checked and fivemega sell a battery holder that alow 2x18650s in Series(not Parallel), He also sell an extended tail with McClicky and sleeve for 2x26500s in series.
    I ordered both so I can have both options
    Last edited by GusManB; 03-27-2016 at 10:40 PM.

  2. #62
    Flashaholic* monkeyboy's Avatar
    Join Date
    Mar 2006
    Location
    UK
    Posts
    2,326

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    I'd definitely be interested in an M6 module if the right driver can be found. Have you considered the XHP emitters? This would give a lot of different driver options as the emitters are available in ~6V and ~12V versions.

    There are 2 x 18650 (series) and 3 x 17670 (series) holders from Fivemega and mdocod. Should be easy to find one as they made a lot of these battery holders.

    EDIT:

    I came across this buck driver which should be good for an XM-L2 or XP-L module:

    - 1 mode or 3 mode versions
    - 2.4A
    - 17mm diameter
    - 3 to 16V operating voltage
    Last edited by monkeyboy; 04-02-2016 at 06:12 AM.

  3. #63
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by monkeyboy View Post
    I'd definitely be interested in an M6 module if the right driver can be found. Have you considered the XHP emitters? This would give a lot of different driver options as the emitters are available in ~6V and ~12V versions.

    There are 2 x 18650 (series) and 3 x 17670 (series) holders from Fivemega and mdocod. Should be easy to find one as they made a lot of these battery holders.

    EDIT:

    I came across this buck driver which should be good for an XM-L2 or XP-L module:

    - 1 mode or 3 mode versions
    - 2.4A
    - 17mm diameter
    - 3 to 16V operating voltage
    Sorry, I somehow missed your post...

    Well, I do plan to try one specific driver for both M3 and M6 but not sure when... it will be for 3V definitely although XHP50 could possibly fit in M6/M3T head... I just need time as it's quite low on priority list, above that is turning M3 into large TripLED...

  4. #64
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    I did say no more eMt3 modules but I was persuaded to build THIS one... seems like an overgrown SingLED...


  5. #65

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Hi Tana, if you have plans to do a Triple in an M3 head I would be interested, what LEDS you might use?

    Becuse the M3 is a 3x123a and if Borde, 2x18500s would fit. So a 2 cell setup would be recommended if you can make/get a driver that's is 2 Cell compatible .
    Last edited by GusManB; 04-15-2016 at 09:56 AM.

  6. #66
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by GusManB View Post
    Hi Tana, if you have plans to do a Triple in an M3 head I would be interested, what LEDS you might use?

    Becuse the M3 is a 3x123a and if Borde, 2x18500s would fit. So a 2 cell setup would be recommended if you can make/get a driver that's is 2 Cell compatible .
    Any 3535 LEDs I have in stock... so XPG2, 219B, 219C, XPL HD, XPL HI (HD fits big optics so it would be max output setup)...

    Planned cell setup is 2x 18500, of course (aiming for newest AW IMR 18500)...

  7. #67
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    While I patiently wait for when I have more time for M3 BigTripLED...






  8. #68
    Flashaholic* shrike2222's Avatar
    Join Date
    May 2012
    Location
    Republic of Korea, US shipping address
    Posts
    1,124

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    It's good!

    Quote Originally Posted by Tana View Post
    While I patiently wait for when I have more time for M3 BigTripLED...






  9. #69

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Hi Tana, are your M3 Drop-in still available? I got a KT-5 and was wandering if it fits? I also got an XtoM adapter as well
    My Lights A mix of Surefires and Custom EDC Size:
    http://www.candlepowerforums.com/vb/...70#post4831070

  10. #70
    Flashaholic
    Join Date
    May 2014
    Location
    The Netherlands
    Posts
    376

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by GusManB View Post
    Hi Tana, are your M3 Drop-in still available? I got a KT-5 and was wandering if it fits? I also got an XtoM adapter as well
    The pic's above, those are KT5 tower moduls.

    These are the spec's of them:
    - Nichia 219B 4500K 90CRI 1.4Amp Tana3 firmware.
    - XPL HD 3000K 90CRI 2.8Amp Tana3 firmware.

    Kind regards JP

  11. #71
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by GusManB View Post
    Hi Tana, are your M3 Drop-in still available? I got a KT-5 and was wandering if it fits? I also got an XtoM adapter as well
    Quote Originally Posted by BlazerNL View Post
    The pic's above, those are KT5 tower moduls.

    These are the spec's of them:
    - Nichia 219B 4500K 90CRI 1.4Amp Tana3 firmware.
    - XPL HD 3000K 90CRI 2.8Amp Tana3 firmware.

    Kind regards JP
    Of course, Gus, they are still available, I'm just slightly slower lately due to complications with my health - but I'm still rolling and modules/mods are ongoing...

    Those modules just above are KT5/M6/M3T fitment... but JP had single cell specifically in mind so they are linear, single cell and are programmable... for now I can only make them single mode if intended use is M6 and M3T (buck driver)... for KT5 on single 18650 body on the other hand it can be any of combos that JP listed for his two...

  12. #72

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    That's Great Tana, so if I am Using the KT5 on a Borde C3 with 2x18500, it would be single mode, am I understand correctly?

    As to the X to M adapter, I plan on getting something like a 6PX so JP's Multi mode would work, is that correct?
    My Lights A mix of Surefires and Custom EDC Size:
    http://www.candlepowerforums.com/vb/...70#post4831070

  13. #73
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by GusManB View Post
    That's Great Tana, so if I am Using the KT5 on a Borde C3 with 2x18500, it would be single mode, am I understand correctly?

    As to the X to M adapter, I plan on getting something like a 6PX so JP's Multi mode would work, is that correct?

  14. #74

    Default Re: Tana eMt3 M-series modules for Surefire M3...

    Hi Tana,

    What is the max output of your drop in for a M3 z46 head, or M3/4/6 with KT4?

  15. #75
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: Tana eMt3 M-series modules for Surefire M3...

    Quote Originally Posted by Steve in SoCal View Post
    Hi Tana,

    What is the max output of your drop in for a M3 z46 head, or M3/4/6 with KT4?
    eMt3 (fits M3) and eMt6 (fits M3T and M6) for stock config hosts have 500 lumens single mode... in any lego with single cell 18650 it's well over 1000 lumens and multimode (KT4 on P60 body for example)...

  16. #76
    Flashaholic*
    Join Date
    Dec 2011
    Location
    NJ
    Posts
    1,607

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Tana, what's the feasibility for one of these dropins for an M4 with an XHP35. Likely to run off of 4x16340

  17. #77
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by staticx57 View Post
    Tana, what's the feasibility for one of these dropins for an M4 with an XHP35. Likely to run off of 4x16340
    I'm not a big fan of multicell setups, especially 4S... in theory it's doable, I even found a pretty cool driver that could support that setup but neither time nor my health currently allow me to do any testing... so nothing for now, sorry...

  18. #78
    Flashaholic* adamlau's Avatar
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    2,083

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Any plans for a KT4 tower with the new XP-L2 (2x18650 for M4 and 3x17670 for M6)? I'm down for two of those
    强光手电是我最爱得

  19. #79
    Tana's Avatar
    Join Date
    Mar 2011
    Location
    Bosnia & Herzegovina
    Posts
    1,828

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Quote Originally Posted by adamlau View Post
    Any plans for a KT4 tower with the new XP-L2 (2x18650 for M4 and 3x17670 for M6)? I'm down for two of those
    No plans for now, as before, finding a proper driver small enough to fit here is the main issue...

    As for XPL2 (same as XPG3), it's just too funky for my taste, too many different colors coming from the same source in beam...

  20. #80
    Flashaholic* id30209's Avatar
    Join Date
    Mar 2008
    Location
    Europe
    Posts
    1,709

    Default Re: TNT eMt3 and eMt6 M-series modules for Surefire M3, M4 and M6...

    Need to bump this thread cause i'll need 1 or 2 of these...

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •