PULLED FROM SALE
Up for grabs are 98% of all the makings for a fully regulated LarryK14+. I thought I'd like another one but 1 is adequate. Included are:
Harbor Freight/Gordon branded gray host identical to my original host
Two new GensAce 6S/5300 mAh, 30C rated Lipo battery packs (hooked in Serial for 12S to drive the regulator)
New and unused JimmyM regulator (one pictured is my serial No #9. One included is the last new and unused regulator now enroute to me from JimmyM)
New, in-the-sealed-box GE brand Q4559x, 28 Volt, 600 Watt lamp
Heat protective fabric - 2 layers. These same model batteries in my light provide between 15 and 18 minutes of Non-Dimming - Full Power run time.
The host has been disassembled and all the non-reused switches and wiring have been tossed. The host has not been cut or otherwise modified to accept the batteries. It is in good to very good condition. This package is for the modder/tinkerer who wants to do it him or herself but doesn't want to round up all the raw parts, some of which are no longer available. The only items you need to provide are the misc. wiring (12 AWG to 10 AWG recommended) with connectors and a fuse holder with fuse. The legs, screw covers, switch cover, protective material and momentary switch are not visible in the pic but are included and in a baggie inside the light host. I have a programmer and will program the regulator however you want it. Don't miss this chance to get all the parts you need for this fabulous light. The host is almost impossible to find and the regulators are no loner made.
Here's what I paid (including shipping) for the components:
1. Batteries - 240.00
2. Host - 30
3. Regulator - 90
4. Lamp - 35
5. Momentary Switch - 7
6. Heat protective fabric - 1
Total - $403
For Sale for $350 $325 shipped insured. PULLED FROM SALE
Up for grabs are 98% of all the makings for a fully regulated LarryK14+. I thought I'd like another one but 1 is adequate. Included are:
Harbor Freight/Gordon branded gray host identical to my original host
Two new GensAce 6S/5300 mAh, 30C rated Lipo battery packs (hooked in Serial for 12S to drive the regulator)
New and unused JimmyM regulator (one pictured is my serial No #9. One included is the last new and unused regulator now enroute to me from JimmyM)
New, in-the-sealed-box GE brand Q4559x, 28 Volt, 600 Watt lamp
Heat protective fabric - 2 layers. These same model batteries in my light provide between 15 and 18 minutes of Non-Dimming - Full Power run time.
The host has been disassembled and all the non-reused switches and wiring have been tossed. The host has not been cut or otherwise modified to accept the batteries. It is in good to very good condition. This package is for the modder/tinkerer who wants to do it him or herself but doesn't want to round up all the raw parts, some of which are no longer available. The only items you need to provide are the misc. wiring (12 AWG to 10 AWG recommended) with connectors and a fuse holder with fuse. The legs, screw covers, switch cover, protective material and momentary switch are not visible in the pic but are included and in a baggie inside the light host. I have a programmer and will program the regulator however you want it. Don't miss this chance to get all the parts you need for this fabulous light. The host is almost impossible to find and the regulators are no loner made.
Here's what I paid (including shipping) for the components:
1. Batteries - 240.00
2. Host - 30
3. Regulator - 90
4. Lamp - 35
5. Momentary Switch - 7
6. Heat protective fabric - 1
Total - $403
For Sale for $350 $325 shipped insured. PULLED FROM SALE
Last edited: