Peak eiger problem with 10440 battery

american · Aug 19, 2014

I have 2 new eigers they both work great with eneloops. Once I put 2 efest 10440s in the qtc doesn't work its just on or off. One I s a lug body. Other is a momentary. Any ideas?

jabe1 · Aug 19, 2014

Definitely odd, mine don't do that at all. I'm not using the efest, but all of mine work well.

american · Aug 19, 2014

Update the lug body works basically as good as an eneloop. But the momentary/keychain post body still acts like no qtc with the 10440 on eneloops is fine. I've tried swapping heads and other things. I've narrowed the problem down to either the body or maybe just the qtc that's either too long or too short

jabe1 · Aug 19, 2014

Are both QTC pills installed the same way? If you look down the tube, are they the same?

american · Aug 20, 2014

jabe1 said:
Are both QTC pills installed the same way? If you look down the tube, are they the same?

Yes. Different length bodies and a ckpper and a brass though

jabe1 · Aug 20, 2014

You should contact Robyn at Peak. It sounds like a faulty QTC pill.

these are such simple lights, there are only a few things that can be faulty. Have you cleaned the threads etc?

american · Aug 20, 2014

She's having me send it in

You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

Peak eiger problem with 10440 battery

american

Enlightened

jabe1

Flashlight Enthusiast

american

Enlightened

jabe1

Flashlight Enthusiast

american

Enlightened

jabe1

Flashlight Enthusiast

american

Enlightened

Similar threads

Latest posts