ven
Flashaholic
Seems to be a little popular topic on here,lots in common with cells,IMR to chargers,be it mods,cells etc.............in short what ever makes your vape
Constructive criticism welcome
Disclaimer-this is not to promote or encourage use,just an alternative method,shares a lot to do with batteries and chargers,use of v/w/ohms. So no need to mention fluid or nicotine strengths( i presume). If ok or not ,please let me know mods
Well i stopped 20 months back,work ban so ended up with a tornado set,iirc about 600mah but fluid for vaping. I had tried the ecig but for me useless.
1st kit
No luck with buildables
so went for various tanks,different ohms
On the evic
vv oddy
Comes with a standard 18650 pany 3400 cell,not up to the job for sub ohms,all stainless,comes with a 5yr warranty which is good
Great tank,the kanger mega
on the vv
Giant tank
Provari mini 2.5
porvari/evic/vv oddy
New oddy BDC tank(bottom duel coil)
22mm plinth for the new delta tank,this uses 3x4.2ohm coils in parallel to give 1.4ohm.............but usable V is 4-6v= lots of flavour/vape
Decided i wanted to use 18650 and not 18500 for longer use
1 of the 3 coils
Fitted with 22mm plinth,perfect fit
I want to use these though in the provari
Turbo tank and vaporshark rDNA to try a box mod
Inside the turbo tank quad coil,just 2x1.8ohm duel coils to make 0.9ohm
These are on my rotor(just like my lights)
Note the ext on the provari for the 18650..............30eu+ delivery OUCH
Cap heads house the dna chip board,screw for the 18650,you get the sony vtc4 with it
Can obv USB charge the VS too,but prefer to remove cells and stick them on the vp2 . I now use 25r cells for longer run times
volts,W and battery life on rear
In hand for size
Running between 15w and 20w with the turbo tank which reads 1ohm
Main chargers i use are xtar due to the V read out
vp1 and vp2 have proved superb for this.
Cheers ven
Constructive criticism welcome
Disclaimer-this is not to promote or encourage use,just an alternative method,shares a lot to do with batteries and chargers,use of v/w/ohms. So no need to mention fluid or nicotine strengths( i presume). If ok or not ,please let me know mods
Well i stopped 20 months back,work ban so ended up with a tornado set,iirc about 600mah but fluid for vaping. I had tried the ecig but for me useless.
1st kit
No luck with buildables
so went for various tanks,different ohms
On the evic
vv oddy
Comes with a standard 18650 pany 3400 cell,not up to the job for sub ohms,all stainless,comes with a 5yr warranty which is good
Great tank,the kanger mega
on the vv
Giant tank
Provari mini 2.5
porvari/evic/vv oddy
New oddy BDC tank(bottom duel coil)
22mm plinth for the new delta tank,this uses 3x4.2ohm coils in parallel to give 1.4ohm.............but usable V is 4-6v= lots of flavour/vape
Decided i wanted to use 18650 and not 18500 for longer use
1 of the 3 coils
Fitted with 22mm plinth,perfect fit
I want to use these though in the provari
Turbo tank and vaporshark rDNA to try a box mod
Inside the turbo tank quad coil,just 2x1.8ohm duel coils to make 0.9ohm
These are on my rotor(just like my lights)
Note the ext on the provari for the 18650..............30eu+ delivery OUCH
Cap heads house the dna chip board,screw for the 18650,you get the sony vtc4 with it
Can obv USB charge the VS too,but prefer to remove cells and stick them on the vp2 . I now use 25r cells for longer run times
volts,W and battery life on rear
In hand for size
Running between 15w and 20w with the turbo tank which reads 1ohm
Main chargers i use are xtar due to the V read out
vp1 and vp2 have proved superb for this.
Cheers ven
Last edited: