Mattaus
Flashlight Enthusiast
*** Shells are now available ***
Hi all,
Given my recent frustrations with a particular project, I have decided to take my mind off it momentarily by going back to doing something I can actually finish...
I have recently updated my P60 shell design. Initially I will have 50 units available and the specs are as follows:
I must apologize for the picture. I only have my 2 year old SG3 to take photos with at the moment!
These shells are better machined than my first run, and much heavier as well. More copper
Yes the screw hole for the grounding ring goes right through the shell. There is no reason why this would have impact on the ability of the shell to do its job.
The cost will $5040USD per shell, and $30USD per additional shell. This price includes standard world-wide airmail shipping. Additional shipping methods are available - please PM me for costs and PayPal details. From experience shipping times are typically 2 weeks to almost all international destinations.
Australian buyers can purchase the shells for $35AUD shipped via standard post. Again, alternate domestic shipping methods are available - please PM me for costs and PayPal details.
As always questions and comments are welcome.
Thanks,
- Matt
Paid and Packed List
Darwin Lopez (email) - 1 - Paid - Shipped
DuncanHynes (CPF) - 1 - Paid - Shipped
LightJunk (CPF) - 1 - Paid - Shipped
SOYCD (CPF) - 13 - Paid - Shipped
DrafterDan (CPF) - 1 - Paid - Shipped
m4a1usr (CPF) - 3 - Paid - Shipped
xv-750 (BLF) - 1 - Paid - Shipped
Grantman321 (BLF) - 1 - Paid - Shipped
Texas Shooter (BLF) - 2 - Paid - Shipped
LSX (BLF) - 1 - Paid - Shipped
MustSimon (BLF) - 1 - Paid - Shipped
Sparkey762 (BLF) - 2 - Paid - Shipped
DBCstm (CPF) - 2 - Paid - Shipped
Rufusbduck (BLF) - 2 - Paid - Shipped
Bushwhacked (BLF) - 5 - Paid - Shipped
MRsDNF (BLF) - 1- Paid - Shipped
AndyF (CPF) - 2 - Paid
DragonHead - (BLF) - 5 - Paid - Shipped
All Gone!
Hi all,
Given my recent frustrations with a particular project, I have decided to take my mind off it momentarily by going back to doing something I can actually finish...
I have recently updated my P60 shell design. Initially I will have 50 units available and the specs are as follows:
- 20mm triple shell
- CNC machined - very high quality
- Solid copper
- Thick silver plating
- Accepts 20mm MCPCBs
- Suits carclo 20mm (10XXX series) optics or similar
- Accepts 17mm drivers with 10mm internal depth
- 3.8mm of space behind the driver when installed. This means that assuming a 1.6mm thick PCB, components 3.8mm or less in height will sit below the rim at the rear of the pill
- 4mm diameter central hole for LED+ and LED- wiring
- Threaded grounding hole with matching allen key bolt (which is supplied with the shell) for easy grounding of driver - simply solder a grounding wire to your driver, wrap the exposed wire around the bolt and screw in. No messy soldering to the pill, or relying on a press fit for good grounding.
- Flat spring shelf for increased compatibility with P60 hosts (OR TL tubes in particular). Springs will not be supplied.
- External dimensions on the shell remain the same as my previous versions, so fitment is pretty much guaranteed with all hosts albeit with foil required in some cases. Basically, you shouldn't ever have an issue with a shell not being able to be installed.
I must apologize for the picture. I only have my 2 year old SG3 to take photos with at the moment!
These shells are better machined than my first run, and much heavier as well. More copper
Yes the screw hole for the grounding ring goes right through the shell. There is no reason why this would have impact on the ability of the shell to do its job.
The cost will $5040USD per shell, and $30USD per additional shell. This price includes standard world-wide airmail shipping. Additional shipping methods are available - please PM me for costs and PayPal details. From experience shipping times are typically 2 weeks to almost all international destinations.
Australian buyers can purchase the shells for $35AUD shipped via standard post. Again, alternate domestic shipping methods are available - please PM me for costs and PayPal details.
As always questions and comments are welcome.
Thanks,
- Matt
Paid and Packed List
Darwin Lopez (email) - 1 - Paid - Shipped
DuncanHynes (CPF) - 1 - Paid - Shipped
LightJunk (CPF) - 1 - Paid - Shipped
SOYCD (CPF) - 13 - Paid - Shipped
DrafterDan (CPF) - 1 - Paid - Shipped
m4a1usr (CPF) - 3 - Paid - Shipped
xv-750 (BLF) - 1 - Paid - Shipped
Grantman321 (BLF) - 1 - Paid - Shipped
Texas Shooter (BLF) - 2 - Paid - Shipped
LSX (BLF) - 1 - Paid - Shipped
MustSimon (BLF) - 1 - Paid - Shipped
Sparkey762 (BLF) - 2 - Paid - Shipped
DBCstm (CPF) - 2 - Paid - Shipped
Rufusbduck (BLF) - 2 - Paid - Shipped
Bushwhacked (BLF) - 5 - Paid - Shipped
MRsDNF (BLF) - 1- Paid - Shipped
AndyF (CPF) - 2 - Paid
DragonHead - (BLF) - 5 - Paid - Shipped
All Gone!
Last edited: