HDS Systems        
Results 1 to 8 of 8

Thread: Who makes this light ?

  1. #1

    Default Who makes this light ?

    It uses x3 cr123s, the tube will not accept a 18650 nor would it work anyways due to the gap. It is one mode, the forward mcclicky broke so I removed the electronics in the tail cap and trashed it.

    There is a label on the head that says: use 3 cr123s. I would love to get this installed on a 18650 host. Not sure on the thread pitch but it is course not fine. The p60 drop in is larger than your standard ultrafire surefire p60 drop ins so can't use it in a UltraFire host. The machinery is very very nice. I messed up the finish on the head by using a vise to remove the head cause when I got this light it had Soo much locktite!!! (Nitecore does this too lol!).

    The light is not very bright but the beam pattern, and color is fantastic. Pics to be added soon. Stand by....
    90+ CRI Rules!
    WTB Solarforce Parts,---> Here
    !

  2. #2
    Flashaholic* Timothybil's Avatar
    Join Date
    Nov 2007
    Location
    The great state of Iowa
    Posts
    3,462

    Default Re: Who makes this light ?

    Is the diameter of the drop-in 10mm larger than the P60? If so, it is known as a D36 drop-in as opposed to the P60, which is a D26. Strictly speaking, the P60 is a specific lamp assembly for Surefire flashlights, in the D26 format. (D26 = 26mm in diameter)
    Remember, Two is One, and One is None!.

  3. #3

    Default Re: Who makes this light ?

    do i measure the top outer ring of the drop in reflector? EDIT it is 26mm 2.5cm is roughly 26mm
    here are the pics


    Last edited by Mr. Nobody; 01-07-2015 at 05:19 PM.
    90+ CRI Rules!
    WTB Solarforce Parts,---> Here
    !

  4. #4

    Default Re: Who makes this light ?

    so, where can one purchase a new host for this?
    90+ CRI Rules!
    WTB Solarforce Parts,---> Here
    !

  5. #5
    Flashaholic*
    Join Date
    Apr 2008
    Location
    Cleveland,Oh
    Posts
    2,521

    Default Re: Who makes this light ?

    What exactly does the label say? It looks like a Milky tape...
    Great spirits have always encountered violent opposition from mediocre minds.
    -- Albert Einstein

  6. #6

    Default Re: Who makes this light ?

    the label says: TB67 3CR123A 3W
    90+ CRI Rules!
    WTB Solarforce Parts,---> Here
    !

  7. #7

    Default Re: Who makes this light ?

    For the record, 2.5 cm is NOT roughly 26 mm...it is precisely 25 mm. One millimeter difference might not seem like much but it's enough. Kinda like saying 2 and 7/8ths inches is roughly 3 inches.

  8. #8

    Default Re: Who makes this light ?

    Quote Originally Posted by lightfooted View Post
    For the record, 2.5 cm is NOT roughly 26 mm...it is precisely 25 mm. One millimeter difference might not seem like much but it's enough. Kinda like saying 2 and 7/8ths inches is roughly 3 inches.
    Lol I didn't want to be incorrect. Thanks. The bottom of the reflector where it threads needs to be shaven to accept any p60 host.
    90+ CRI Rules!
    WTB Solarforce Parts,---> Here
    !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •