Re: Arc4 FAQ draft

fenix-store
Status
Not open for further replies.
T

terrybright

Newly Enlightened
Joined
Dec 11, 2003
Messages
37
Location
Rochester, NY
Re: Arc4 FAQ draft

I did not see the weight in the draft and it would be a good thing to include that along with the dimensions. Terry F
 
C

carmel

Newly Enlightened
Joined
Oct 28, 2003
Messages
129
Location
Berkeley, CA
Re: Arc4 FAQ draft

Peter - small item: at one point the draft FAQ says it is 3.1 inches long (bullet) and just below it says that it is 3.2 inches long.

And a question: does removing the clip from the Arc4 compromise it in any way (water resistance, etc)? I see it's screwed into the body.

You WILL let us know when you're going to be taking pre-orders, of course. . . .

thanks!

carmel
 
G

Gransee

Flashlight Enthusiast
Joined
Jan 26, 2001
Messages
4,706
Location
Mesa, AZ. USA
Re: Arc4 FAQ draft

OK, I updated the draft. Thanks.

Removing the clip has no effect on the operation of the rest of the light.

Peter
 
B

brickbat

Enlightened
Joined
Dec 25, 2003
Messages
890
Location
Indianapolis
Re: Arc4 FAQ draft

Call me anal, but there's a parenthesis error in the "beam" section. Also, in the "output" section, the run time is shown as 2 hours, but later, an average run time of 1.5 hours is specified. I understand that run time is really beyond the flashlight designer's control due to the vagueries of battery capacity, temperature, etc.

Jim
 
Status
Not open for further replies.

Similar threads

B
KX2 plastic dome re-attachment?
Replies
2
Views
535
blueo8
B
A
Question re. Part in Fury
Replies
2
Views
749
AZPops
A
W
Question re: Zebralight 600w II L2...
Replies
8
Views
2K
eh4
E
H
PhotonLight Freedom Micro re-build (?)
Replies
10
Views
2K
Timothybil
Timothybil
Buck91
Re-modding my old fenix's??
Replies
0
Views
666
Buck91
Buck91

Latest posts

Top