Lumencrazy
Enlightened
- Joined
- Mar 10, 2015
- Messages
- 369
I am working on a display holder for flashlights. I am looking for the Tailcap dimensions for the most common flashlights.
The dimensions I require are as follows:
1) The diameter of the end tailcap
2) The length of the tailcap when removed. Metal to metal (longest dimension) not including the protruding rubber on/off switch.
For example: I am interested in the following lights. If you have other lights, for example Klarus, Sunwayman and etc. please include them.
Eagletac: D series
P series
T series
etc.
NiteCore P12, P25, P20 etc.
EC20, EC 21, etc
MH20, MH12, MH10 etc.
MT 21a MT 26 etc
Olight M22, M23
S30 and etc.
R20 and etc.,
Elzetta all models
I suspect most will be somewhere around 25mm in diameter. I am looking for more accurate dimensions
Any help would be most greatfully appreciated.
The dimensions I require are as follows:
1) The diameter of the end tailcap
2) The length of the tailcap when removed. Metal to metal (longest dimension) not including the protruding rubber on/off switch.
For example: I am interested in the following lights. If you have other lights, for example Klarus, Sunwayman and etc. please include them.
Eagletac: D series
P series
T series
etc.
NiteCore P12, P25, P20 etc.
EC20, EC 21, etc
MH20, MH12, MH10 etc.
MT 21a MT 26 etc
Olight M22, M23
S30 and etc.
R20 and etc.,
Elzetta all models
I suspect most will be somewhere around 25mm in diameter. I am looking for more accurate dimensions
Any help would be most greatfully appreciated.
Last edited:
