zoran
Enlightened
SOLD! Mac, Aleph, McGizmo, Maxabeam, Arc
First 'I'll take it' followed by PM and prompt payment via PayPal gets the item. Items will be sent from Switzerland and prices are inclusive of shipping via registered mail with full tracking. Once dropped off at the post office and the tracking number is provided, the responsibility is yours.
I keep the right to refuse the sale to anyone.
Please PM me for any questions or additional information. Thanks for your interest.
Additional high resolution photos: https://sniffles.smugmug.com/Hobbies/Sept-Sale/n-96X9qw and https://sniffles.smugmug.com/Hobbies/Dec/n-wdQ88x
I can take short videos on request.
5. Arc LS Clicky Triple - $190 180 170 TRADED
Great condition with nice matching anno, with a neutral Datiled triple. Comes with extra 14500 twisty tail.
6. Arc LS orange Clicky Triple - $WITHDRAWN
Orange cerakote, with a neutral Datiled triple. Comes with a short twisty tail. No marks that I can see.
7. Maxabeam "Lite" - $WITHDRAWN
Gen II Maxabeam S/N #M8348 G2-20 . I've had this light since late 2009, with less than 15 minutes of run time. The previous two owners stated around 22 hours of usage.
You will need to source your own A123 cells, with each tube taking four cells.
The person I purchased the light from wasn't into the heavy OEM battery packs and wanted something light to power the Maxabeam. It's amazing how light and easy to carry the Maxabeam reflector/ballast housing is without the weight of the OEM battery attached to it. You can stick a single A123 battery pack in your back pocket or jacket pocket and never even notice it's there. The battery pack weighs 12oz and powers the Maxabeam for 30 minutes in normal mode, which is in most situations more than enough.
This Maxabeam setup comes with three of the A123 patented solderless power tubes that are no longer available, and a specialty A123 charger (http://www.astroflight.com/123.html ) that is powered by a 12 volt automotive battery or other 12 Volt DC power source.
The battery tubes utilize Anderson Power Pole connectors (http://www.powerwerx.com/anderson-po...owerpole-sets/) and include connections/connectors to allow single battery pack usage or two of the battery packs to be used in parallel. There are also connectors that allow the light to be ran off of a vehicle battery or a cigarette lighter.
Also included is a Covert IR 850 Nm filter that has a retail price of over $400. (http://www.brightguy.com/Maxa+Beam/M...vert+IR+Filter)
Cosmetically, the body shows surface marks and scratches but the light functions perfectly. If you need any specific close up photos, please let me know.
More photos that show all accessories included with the light are available here: http://sniffles.smugmug.com/Hobbies/Maxabeam/n-CdbpF
BELOW ITEMS ALL SOLD
1. McLux III PD with XML - $400 SOLD
Modded by DatiLED with a neutral xml, stock drive levels with a beautiful beam. Green tritium in the piston. Cerakote by *LASER* Great condition.
2. LED Zeppelin MZOX-4 And FiveMega Megalennium Series Body - $500 SOLD
A solid wall of light with a square beam that throws way out from the center aspheric lens This drop-in will run in a Surefire M6 but with the FiveMega Megallenium body it can be run with a 6 x 18350 or 3 x 18650/17670. As shown it has an RPM scalloped Titanium bezel ring.
This light and it's siblings have quite a history on this site, there are sale threads to read through if you search - and here is the original thread, it's a great read even if you don't buy the light, a fully documented build, beamshots, everything.
http://www.candlepowerforums.com/vb/showthread.php?218467-M-Zeppelin-SF-M6-LED-mods
3. McGizmo Makai Head with XPG three speed light engine. - $250 SOLD
4. SuperFlashlight III with SMT upgrade and anti roll tailcap. - $350 SOLD
Original sales thread containing the specs and some wonderful photos is linked below. Great, great, great light and some fantastic knurling.
http://http://www.candlepowerforums...T-upgrade*PRICE-DROP*NOW-400*&highlight=sfIII
Copper Mac Tri-EDC - $627 SOLD
Triple Nichia 219B with neutral tint, 3.04A driver, Noctigon board, four mode, chemkote heatsink (aluminum), orange Gunga sticker, glow powder under optics, glow lens oring, glow switch boot. It accepts 18350 cells. This has been my daily user and it shows. I love the light along with all of its character marks, and yes, it has been dropped numerous times, it rode with the keys in my pocket and I even cracked a few nuts with it.
I will have a few more Mac lights for sale as soon as I receive them back from the modder.
Aleph/SF lego - $217 207 SOLD
The bezel is a polished stainless one from a Novatac. The head is an Aleph A19 with a McR19XR reflector and a sapphire lens.
The light engine was built with an Aleph XR can, as follows:
- LED is 4000K XML2 on direct thermal copper board
- Custom Flucero circuit based on AMC7135 chips. It is programmed with 5 levels plus strobe.
- There is a hybrid memory mode, with 0.5 second latch time (latches after being on for 0.5 seconds). Reset is back to moonlight so you never have to hit strobe if you don't want to.
- The levels are approx.: moonlight, 2, 30, 110, 300+ lumens based on currents of 4,9,77,299,1413mA
- Brass contact added to the positive terminal of the pill.
- Aqua glow sticker around the emitter.
The body is ceracoted toxic green HA Surefire E1L with a 2way clip from an E1B. The tailcap is a McGizmo McTc with a McClicky installed. it matches the head well and allows tailstanding.
McGizmo Mule EN Plated - $200 Sold
EN Plated McGizmo Aluminum Mule, single speed light engine, XRE emitter with glow paint around it, hard press clicky. This is a user with a bunch of marks on the body.
Mac 3300L, 1550mA - $700 650 SOLD
9 x 3000K High CRI XP-G's driven at 1550mA (this is the upgraded version)
H/M/L
32650's or IMR26650's
Stainless Steel crenelated bezel
MagSW01 Tailcap with 10A switch
9x white trits installed in the optics
Cerakote done by *Laser*
Excellent condition with no marks on the body.
First 'I'll take it' followed by PM and prompt payment via PayPal gets the item. Items will be sent from Switzerland and prices are inclusive of shipping via registered mail with full tracking. Once dropped off at the post office and the tracking number is provided, the responsibility is yours.
I keep the right to refuse the sale to anyone.
Please PM me for any questions or additional information. Thanks for your interest.
Additional high resolution photos: https://sniffles.smugmug.com/Hobbies/Sept-Sale/n-96X9qw and https://sniffles.smugmug.com/Hobbies/Dec/n-wdQ88x
I can take short videos on request.
5. Arc LS Clicky Triple - $190 180 170 TRADED
Great condition with nice matching anno, with a neutral Datiled triple. Comes with extra 14500 twisty tail.
6. Arc LS orange Clicky Triple - $WITHDRAWN
Orange cerakote, with a neutral Datiled triple. Comes with a short twisty tail. No marks that I can see.
7. Maxabeam "Lite" - $WITHDRAWN
Gen II Maxabeam S/N #M8348 G2-20 . I've had this light since late 2009, with less than 15 minutes of run time. The previous two owners stated around 22 hours of usage.
You will need to source your own A123 cells, with each tube taking four cells.
The person I purchased the light from wasn't into the heavy OEM battery packs and wanted something light to power the Maxabeam. It's amazing how light and easy to carry the Maxabeam reflector/ballast housing is without the weight of the OEM battery attached to it. You can stick a single A123 battery pack in your back pocket or jacket pocket and never even notice it's there. The battery pack weighs 12oz and powers the Maxabeam for 30 minutes in normal mode, which is in most situations more than enough.
This Maxabeam setup comes with three of the A123 patented solderless power tubes that are no longer available, and a specialty A123 charger (http://www.astroflight.com/123.html ) that is powered by a 12 volt automotive battery or other 12 Volt DC power source.
The battery tubes utilize Anderson Power Pole connectors (http://www.powerwerx.com/anderson-po...owerpole-sets/) and include connections/connectors to allow single battery pack usage or two of the battery packs to be used in parallel. There are also connectors that allow the light to be ran off of a vehicle battery or a cigarette lighter.
Also included is a Covert IR 850 Nm filter that has a retail price of over $400. (http://www.brightguy.com/Maxa+Beam/M...vert+IR+Filter)
Cosmetically, the body shows surface marks and scratches but the light functions perfectly. If you need any specific close up photos, please let me know.
More photos that show all accessories included with the light are available here: http://sniffles.smugmug.com/Hobbies/Maxabeam/n-CdbpF
BELOW ITEMS ALL SOLD
1. McLux III PD with XML - $400 SOLD
Modded by DatiLED with a neutral xml, stock drive levels with a beautiful beam. Green tritium in the piston. Cerakote by *LASER* Great condition.
2. LED Zeppelin MZOX-4 And FiveMega Megalennium Series Body - $500 SOLD
A solid wall of light with a square beam that throws way out from the center aspheric lens This drop-in will run in a Surefire M6 but with the FiveMega Megallenium body it can be run with a 6 x 18350 or 3 x 18650/17670. As shown it has an RPM scalloped Titanium bezel ring.
This light and it's siblings have quite a history on this site, there are sale threads to read through if you search - and here is the original thread, it's a great read even if you don't buy the light, a fully documented build, beamshots, everything.
http://www.candlepowerforums.com/vb/showthread.php?218467-M-Zeppelin-SF-M6-LED-mods
3. McGizmo Makai Head with XPG three speed light engine. - $250 SOLD
4. SuperFlashlight III with SMT upgrade and anti roll tailcap. - $350 SOLD
Original sales thread containing the specs and some wonderful photos is linked below. Great, great, great light and some fantastic knurling.
http://http://www.candlepowerforums...T-upgrade*PRICE-DROP*NOW-400*&highlight=sfIII
Copper Mac Tri-EDC - $627 SOLD
Triple Nichia 219B with neutral tint, 3.04A driver, Noctigon board, four mode, chemkote heatsink (aluminum), orange Gunga sticker, glow powder under optics, glow lens oring, glow switch boot. It accepts 18350 cells. This has been my daily user and it shows. I love the light along with all of its character marks, and yes, it has been dropped numerous times, it rode with the keys in my pocket and I even cracked a few nuts with it.
I will have a few more Mac lights for sale as soon as I receive them back from the modder.
Aleph/SF lego - $217 207 SOLD
The bezel is a polished stainless one from a Novatac. The head is an Aleph A19 with a McR19XR reflector and a sapphire lens.
The light engine was built with an Aleph XR can, as follows:
- LED is 4000K XML2 on direct thermal copper board
- Custom Flucero circuit based on AMC7135 chips. It is programmed with 5 levels plus strobe.
- There is a hybrid memory mode, with 0.5 second latch time (latches after being on for 0.5 seconds). Reset is back to moonlight so you never have to hit strobe if you don't want to.
- The levels are approx.: moonlight, 2, 30, 110, 300+ lumens based on currents of 4,9,77,299,1413mA
- Brass contact added to the positive terminal of the pill.
- Aqua glow sticker around the emitter.
The body is ceracoted toxic green HA Surefire E1L with a 2way clip from an E1B. The tailcap is a McGizmo McTc with a McClicky installed. it matches the head well and allows tailstanding.
McGizmo Mule EN Plated - $200 Sold
EN Plated McGizmo Aluminum Mule, single speed light engine, XRE emitter with glow paint around it, hard press clicky. This is a user with a bunch of marks on the body.
Mac 3300L, 1550mA - $700 650 SOLD
9 x 3000K High CRI XP-G's driven at 1550mA (this is the upgraded version)
H/M/L
32650's or IMR26650's
Stainless Steel crenelated bezel
MagSW01 Tailcap with 10A switch
9x white trits installed in the optics
Cerakote done by *Laser*
Excellent condition with no marks on the body.
Last edited:
