Well, after acquiring a couple "unplanned for" "grail-type" lights last week, I need to let a few others go.
No batteries included unless specified. Shipping included.
Open to trades for items in my wanted thread (see sig) or E series Ti parts... or AOTH holsters...
** When an items sells, I will move it to the bottom section of this post...
****** SOLD ITEMS BELOW **********
Withdrawn FiveMega/JasonH/VestureofBlood/Solarforce Lego
FiveMega Copper Cooly C Head
Vesture of Blood MT-G2 Copper Dropin (L-M-H)
Solarforce 2x18650 body in matte black
JasonH BeCu Fatty tail with McClicky
This really lights up the room! the dropin is awesome, and the copper head helps with the heat.
http://www.indysworld.com/sale/cu-and-black-1.jpg
http://www.indysworld.com/sale/cu-and-black-2.jpg
Withdrawn Peak Eiger Ultra Copper QTC, Micro USB charger head to charge cell phone
Cool tint, uses AAA or 10440. Will include one 10440.
Carried a few times in my pocket. used a bit around the house. last picture tries to show a ding on the bezel at 12:00 position.
http://www.indysworld.com/sale/peak-copper-ultra.jpg
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1727&d=1450763208
$25 $20 $16 - SOLD Funky Joule Thief Lantern by Lazrboy29
I bought this broken here: http://www.cpfmarketplace.com/mp/showthread.php?318825-FJT-meets-toddler-up-for-sale!
and fixed it up. The pieces were carefully put back together, but I would say it's a tad on the fragile side. has worked ever since I fixed it, but I wouldn't want to rough and tumble it...
the magnetic ends no longer worked, so I replaced with flat ends inside the twist tube as shown. AA or AAA fits inside the tube.
http://www.indysworld.com/sale/joule-thief-lantern-1.jpg
http://www.indysworld.com/sale/joule-thief-lantern-2.jpg
http://www.indysworld.com/sale/joule-thief-lantern-3.jpg
$350 $320 $310 $290 - SOLD Mac's SST-50 EDC, EN Plated Aluminum - no clip, SST-50 1.4 Amp stock driver, 16340 size, LMH.
http://www.indysworld.com/sale/edc-al-EN.jpg
$400 $350 $325 $310 - SOLD Mac's Aluminum EDC - Bare, XM-L, copper pill (stock driver), 16340 size, LMH, clip
http://www.indysworld.com/sale/edc-al-bare.jpg
$500 $450 $425 $400 - SOLDMac's Aluminum Tri-EDC - Tungsten/Gunmetal Cerakote (perfect shape), XP-G, stock driver, green glow pad under optic, clip, crenelated bezel, 18350 size
http://www.indysworld.com/sale/tri-edc-al-cerakote.jpg
$450 $425 $350 - SOLD Mac's Aluminum Tri-EDC - Bare, ML-L-M-H, XPG2's neutral tinted 4750k, glow powder, drilled optic for trits with 3 blue trits, 18350 size
http://www.indysworld.com/sale/tri-edc-al-bare.jpg
$170 $160 $150 $140 $135 $130 - SOLD Micro ATL Copper by SunnyNites. G4 (top and bottom covers) and G3 Prototype (top cover only)
Sold as a set as there's only one charger/voltmeter with set.This is how it was purchased.
The G3 Prototype never left the "collection shelf", but the G4 has been carried daily on my keychain, so show's plenty of key marks, etc...
http://www.indysworld.com/sale/micro-atl-copper-1.jpg
http://www.indysworld.com/sale/micro-atl-copper-2.jpg
http://www.indysworld.com/sale/micro-atl-copper-3.jpg
$10 $9 $8 - SOLD group of budget type lights
-Duracell take 2xAA. head telescopes out to become a lantern of sorts.
-Energizer takes 2xAA. has (5) 5mm leds. has yellowish corona with blue/purple hot spot.
-Performance Tool Charger. Uses a AA. has a charger hole in center of head for micro USB charge as seen.
If you unplug the charger wire, then there are (2) 5mm leds that will light up.
-Menards home center light takes 2xAA. 1 watt LED. Wood around aluminum core.
http://www.indysworld.com/sale/budget.jpg
$75 $70 - SOLD Nitecore D10sp R2 Camo
I've cleaned up the piston (a little sticky previously) and added a blue 2x5 (I think) trit. mode changes beautifully now. you can see pics here where I just got it...
http://www.candlepowerforums.com/vb...llection-up-for-grabs-**-Fenix-TK11-added!!-*
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1718&d=1450568981
$425 $410 $400 - Traded Okluma TinyDC Brass
Very well built, as you can see from the marks, it's take a few spills while in use,
Triple Nichia 219 emitters. Take 18350 battery. McClicky installed in tail, Ti clip. I re-profiled the clip, and swapped in Brass clip screws...
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1598&d=1449845005
http://www.indysworld.com/sale/tinyDC-2.jpg
http://www.indysworld.com/sale/tinyDC-3.jpg
$10 $8 - SOLD LED Supplies
What's left of a lot I picked up some time ago. lots of little wires and lots of leds on boards, etc...
mostly old school LEDs. don't remember what there were.
The little silver bagged ones look like they are mostly XML, but there is one Nichia 219A, and some other oddballs.
some are previouls installed ones that were removed for an upgrade.
not sure how hard it would be to find drivers for these to use. fun to play around with.
I turned a few a nice angry blue before they went dark while trying to fix a burnout D26 dropin (those dead ones are not included)
http://www.indysworld.com/sale/LED-supplies.jpg
. SOLD - $270 TnC Ultralux 14500 with 13 trits installed in tail
Trits are installed in the groove that was meant for a keyring clip.
http://www.indysworld.com/sale/tnc-14500-1.jpg
http://www.indysworld.com/sale/tnc-14500-2.jpg
http://www.indysworld.com/sale/tnc-14500-3.jpg
No batteries included unless specified. Shipping included.
Open to trades for items in my wanted thread (see sig) or E series Ti parts... or AOTH holsters...
** When an items sells, I will move it to the bottom section of this post...
****** SOLD ITEMS BELOW **********
Withdrawn FiveMega/JasonH/VestureofBlood/Solarforce Lego
FiveMega Copper Cooly C Head
Vesture of Blood MT-G2 Copper Dropin (L-M-H)
Solarforce 2x18650 body in matte black
JasonH BeCu Fatty tail with McClicky
This really lights up the room! the dropin is awesome, and the copper head helps with the heat.
http://www.indysworld.com/sale/cu-and-black-1.jpg
http://www.indysworld.com/sale/cu-and-black-2.jpg
Withdrawn Peak Eiger Ultra Copper QTC, Micro USB charger head to charge cell phone
Cool tint, uses AAA or 10440. Will include one 10440.
Carried a few times in my pocket. used a bit around the house. last picture tries to show a ding on the bezel at 12:00 position.
http://www.indysworld.com/sale/peak-copper-ultra.jpg
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1727&d=1450763208
$25 $20 $16 - SOLD Funky Joule Thief Lantern by Lazrboy29
I bought this broken here: http://www.cpfmarketplace.com/mp/showthread.php?318825-FJT-meets-toddler-up-for-sale!
and fixed it up. The pieces were carefully put back together, but I would say it's a tad on the fragile side. has worked ever since I fixed it, but I wouldn't want to rough and tumble it...
the magnetic ends no longer worked, so I replaced with flat ends inside the twist tube as shown. AA or AAA fits inside the tube.
http://www.indysworld.com/sale/joule-thief-lantern-1.jpg
http://www.indysworld.com/sale/joule-thief-lantern-2.jpg
http://www.indysworld.com/sale/joule-thief-lantern-3.jpg
$350 $320 $310 $290 - SOLD Mac's SST-50 EDC, EN Plated Aluminum - no clip, SST-50 1.4 Amp stock driver, 16340 size, LMH.
http://www.indysworld.com/sale/edc-al-EN.jpg
$400 $350 $325 $310 - SOLD Mac's Aluminum EDC - Bare, XM-L, copper pill (stock driver), 16340 size, LMH, clip
http://www.indysworld.com/sale/edc-al-bare.jpg
$500 $450 $425 $400 - SOLDMac's Aluminum Tri-EDC - Tungsten/Gunmetal Cerakote (perfect shape), XP-G, stock driver, green glow pad under optic, clip, crenelated bezel, 18350 size
http://www.indysworld.com/sale/tri-edc-al-cerakote.jpg
$450 $425 $350 - SOLD Mac's Aluminum Tri-EDC - Bare, ML-L-M-H, XPG2's neutral tinted 4750k, glow powder, drilled optic for trits with 3 blue trits, 18350 size
http://www.indysworld.com/sale/tri-edc-al-bare.jpg
$170 $160 $150 $140 $135 $130 - SOLD Micro ATL Copper by SunnyNites. G4 (top and bottom covers) and G3 Prototype (top cover only)
Sold as a set as there's only one charger/voltmeter with set.This is how it was purchased.
The G3 Prototype never left the "collection shelf", but the G4 has been carried daily on my keychain, so show's plenty of key marks, etc...
http://www.indysworld.com/sale/micro-atl-copper-1.jpg
http://www.indysworld.com/sale/micro-atl-copper-2.jpg
http://www.indysworld.com/sale/micro-atl-copper-3.jpg
$10 $9 $8 - SOLD group of budget type lights
-Duracell take 2xAA. head telescopes out to become a lantern of sorts.
-Energizer takes 2xAA. has (5) 5mm leds. has yellowish corona with blue/purple hot spot.
-Performance Tool Charger. Uses a AA. has a charger hole in center of head for micro USB charge as seen.
If you unplug the charger wire, then there are (2) 5mm leds that will light up.
-Menards home center light takes 2xAA. 1 watt LED. Wood around aluminum core.
http://www.indysworld.com/sale/budget.jpg
$75 $70 - SOLD Nitecore D10sp R2 Camo
I've cleaned up the piston (a little sticky previously) and added a blue 2x5 (I think) trit. mode changes beautifully now. you can see pics here where I just got it...
http://www.candlepowerforums.com/vb...llection-up-for-grabs-**-Fenix-TK11-added!!-*
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1718&d=1450568981
$425 $410 $400 - Traded Okluma TinyDC Brass
Very well built, as you can see from the marks, it's take a few spills while in use,
Triple Nichia 219 emitters. Take 18350 battery. McClicky installed in tail, Ti clip. I re-profiled the clip, and swapped in Brass clip screws...
http://www.candlepowerforums.com/vb/attachment.php?attachmentid=1598&d=1449845005
http://www.indysworld.com/sale/tinyDC-2.jpg
http://www.indysworld.com/sale/tinyDC-3.jpg
$10 $8 - SOLD LED Supplies
What's left of a lot I picked up some time ago. lots of little wires and lots of leds on boards, etc...
mostly old school LEDs. don't remember what there were.
The little silver bagged ones look like they are mostly XML, but there is one Nichia 219A, and some other oddballs.
some are previouls installed ones that were removed for an upgrade.
not sure how hard it would be to find drivers for these to use. fun to play around with.
I turned a few a nice angry blue before they went dark while trying to fix a burnout D26 dropin (those dead ones are not included)
http://www.indysworld.com/sale/LED-supplies.jpg
. SOLD - $270 TnC Ultralux 14500 with 13 trits installed in tail
Trits are installed in the groove that was meant for a keyring clip.
http://www.indysworld.com/sale/tnc-14500-1.jpg
http://www.indysworld.com/sale/tnc-14500-2.jpg
http://www.indysworld.com/sale/tnc-14500-3.jpg
Last edited: