Imalent        
Results 1 to 4 of 4

Thread: Nitecore Mt2C changing mod by hitting the tailcap.

  1. #1

    Default Nitecore Mt2C changing mod by hitting the tailcap.

    Hello,
    I own a Nitecore Mt2C wich I like very much!
    But I noticed, that the modus will change if I hit the light or tailcap with my hand.
    The light is not in guarantee any more, even if the problem occures about half a year before.
    My distributor told me to tighten the switch from the inside, but it's allready really tight.

    Is there a solution without buying a new tailcap?

    Kind regards
    surfer

  2. #2

    Default Re: Nitecore Mt2C changing mod by hitting the tailcap.

    A loosen plate inside the tail cap could cause the problem but it might not be the only factor.

    The light should still be under 5 year warranty.

    We recommend to write to the factory technical support directly at service@nitecore.com. They might offer your more insights and which closest place you can get it fixed.

  3. #3

    Default Re: Nitecore Mt2C changing mod by hitting the tailcap.

    Thanks!
    I'll contact the technical support!

    Regards
    surfer

  4. #4

    Default Re: Nitecore Mt2C changing mod by hitting the tailcap.

    Quote Originally Posted by spsurfer View Post
    Thanks!
    I'll contact the technical support!

    Regards
    surfer
    Iím sorry I know this is an old thread but were you able to get your mt2c fixed?
    I have been having the same problem with mine.
    Last edited by 300Z; 02-25-2021 at 12:04 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •