• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Pi Projects – Ninjas (Sales Closed)

muhaha

Newly Enlightened
Joined
Mar 2, 2015
Messages
151
Location
Taiwan
Pi Projects presents Ninja mini light for sale. This will be a limited edition of no more than 30 each of copper and brass (copper Ninjas are sold out). Please take a few minutes to read thoroughly before making any purchases.
.
Ninja Specs:
Brass hosts with deep etching of a dragon and 忍者 (Ninja in Japanese)
Newest and the brightest XP-G2 emitter; S4, 2C (cool white, 5700K, slightly yellow in tint)
Scratch resistant sapphire glass
SMO aluminum reflector w/ 16 degree beam angle
Operating on a single Li-ion 10220 rechargeable battery
Dimensions: 16 x 50 mm or 0.64 x 2"
Weight: 48 grams or 1.7 oz. w/o battery
One slot for tritium locator of 3 x 16 mm, viewable from five sides.
5mm hole for Paracord/triangle ring

UI:
Two-stage control:
- Turn to control on/off
- 0 to around 60% of power, variable brightness via QTC control
- Around 60% of power, system ramps up to max output.
QTC pill double-protection:
1. No direct contact between battery and QTC pill.
2. Anti-squashing protection
3. It operates as full power on/off if QTC pill is removed. QTC pill can be accessed from battery inlet.

Important notes:
1. The dragon and 忍者 are not engraved by a machine. It's handmade. with deep etching, the results will have slight variations; depths, lines not straight or clear defined, small excess or not enough etching here and there. They somehow give individuality of appearance to each light. If you are looking for perfectly machined outer appearance, this is not the light for you.
2. We reserve the rights to refuse the sale.

Price: $65
Basic package:
1 x brass Ninja mini light
2 x Li-ion rechargeable battery
1 x brass USB battery charger
1 x extra body o-ring
1 x petina brass triangle key ring

Extra charges:
- $15 for a tritium vial installed with choice of colors. Please refer to www.mixglo.com for color selections and brightness.
- $5 shipping via International Registered Mail from Taiwan
- $25 Express Mail Service (EMS) shipping

Free of charge: petina
1. Petina in indented areas, w/ green or w/o green rust
2. Petina for all, green or w/o green rust

Payment: Only Paypal is accepted
How to order: Please send payment directly to [email protected]
You can also order them directly from my website, linked in my signature. For orders with tritium locator, please state the color along with your Paypal payment,
For those who want patina finish, please specify the type of petina along with your payment.
All orders will be processed by payment received.
First shipment will go out on or before Jan 13. After that, please allow us 3 working days for shipping.
Send me a PM if you have questions or special requests.
 
Last edited:

muhaha

Newly Enlightened
Joined
Mar 2, 2015
Messages
151
Location
Taiwan
Re: Pi Projects – Ninja in Copper and Brass

Output: 102 Lumens under ANSI/NEMA FL-1 (30 sec reading after light was on at max)
Runtime > 15 min
Beam distance: >95 meters
Max output (initial surge): 145 lumens
DSC02602_zps3rh6axtt.jpg


12494204_931595040210663_2118083082_o_zpsnp04xtuy.jpg

DSC02601_zpsk0wkoot0.jpg


DSC02599_zpsvmfm2m9z.jpg


DSC02597_zpsccgie5ta.jpg


DSC02591_zps5qrluxmx.jpg


DSC02586_zpswhmcqosw.jpg


DSC02609_zpsibpelusx.jpg


12309061_912860865417414_885411722_n_zpsbma8bwqu.jpg
 
Last edited:

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: Pi Projects – Ninja in Copper and Brass

Very nice! Will these be available on mixglo.com later?
 

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: Pi Projects – Ninja in Copper and Brass

Talk to Daniel about it :) it would be nice to get all my tritium goods along with this beauty in one go!

Also, would it be possible to get a neutral LED in it? Will an XP-L hi fit in the reflector opening?
 

muhaha

Newly Enlightened
Joined
Mar 2, 2015
Messages
151
Location
Taiwan
Re: Pi Projects – Ninja in Copper and Brass

Daniels knows about Ninja since I had to explain why I picked up some huge trits last night.

I'm sure I have some neutral XP-G2's. Could be S3. If you are serious acquiring a Ninja, I can look it up tomorrow.

Unfortunately the reflector will not fit a XP-L. The S4 has the same brightness rating as XP-L V2. Even the latest V6 rates only 20% more brightness than S4.
 

magellan

Honorary Aussie
Joined
Feb 3, 2014
Messages
5,003
Location
USA
Re: Pi Projects – Ninja in Copper and Brass

I'd like one copper and one brass.

PayPal sent for one copper and one brass, no trits, no patina, regular shipping.
 
Last edited:

Thud1023

Enlightened
Joined
Sep 27, 2014
Messages
648
Location
Austin, TX
Pi Projects – Ninja in Copper and Brass

Payment sent for a copper Ninja. Green trit, patina indented area w/o green, EMS shipping. Thx!
 
Last edited:

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: Pi Projects – Ninja in Copper and Brass

I'll take a copper Ninja if you could do a neutral version for me!
 

jonwkng

Flashlight Enthusiast
Joined
Jun 12, 2013
Messages
1,994
Location
Singapore
Re: Pi Projects – Ninja in Copper and Brass

I'll take one brass and one copper Ninja. Both with Ice-Blue trits. No patina. EMS shipping.
:paypal:
Thank you! :)
 

RGRAY

Flashlight Enthusiast
Joined
Jun 26, 2015
Messages
1,176
Re: Pi Projects – Ninja in Copper and Brass

They look great! :twothumbs

1 copper with green trit
1 brass with yellow trit
patina in indent area (no green)
regular shipping
prepaid

Matching copper and brass battery cases would be :cool:.
 
Last edited:

muhaha

Newly Enlightened
Joined
Mar 2, 2015
Messages
151
Location
Taiwan
Re: Pi Projects – Ninja in Copper and Brass

I'll take a copper Ninja if you could do a neutral version for me!
I have R3 5A3. http://www.cutter.com.au/proddetail.php?prod=cut1373
Let me know if this is what you want.
I'll take one brass and one copper Ninja. Both with Ice-Blue trits. No patina. EMS shipping.
:paypal:
Thank you! :)
Payment received. Thanks!
They look great! :twothumbs

1 copper with green trit
1 brass with yellow trit
patina in indent area (no green)
regular shipping
prepaid

Matching copper and brass battery cases would be :cool:.
Noted and will do. I'll work on the case, as in singular, soon. ;)
 

magellan

Honorary Aussie
Joined
Feb 3, 2014
Messages
5,003
Location
USA
Re: Pi Projects – Ninja in Copper and Brass

Glad to see the interest in this light. I don't recall another one with this sort of engraved relief. Anyone else know of another light with this feature? If you do or have one, do you want to sell? LOL
 

RGRAY

Flashlight Enthusiast
Joined
Jun 26, 2015
Messages
1,176
Re: Pi Projects – Ninja in Copper and Brass

They look great! :twothumbs

1 copper with green trit
1 brass with yellow trit
patina in indent area (no green)
regular shipping

I CAN'T WAIT! :green:
I just paypaled you $20 more for EMS shipping. :D
 

autogiro

Enlightened
Joined
Sep 28, 2006
Messages
751
Location
Pikes Peak, CO
Re: Pi Projects – Ninja in Copper and Brass

I just ordered one of each on your website, both with trits. I forgot to ask to have them both done with the patina finish.
Auto
 

magellan

Honorary Aussie
Joined
Feb 3, 2014
Messages
5,003
Location
USA
Re: Pi Projects – Ninja in Copper and Brass

These are so cool. I love the bas relief aspect.

And only 30. Anyone up for a second run with different carvings? I'm in.
 

muhaha

Newly Enlightened
Joined
Mar 2, 2015
Messages
151
Location
Taiwan
Re: Pi Projects – Ninja in Copper and Brass

I just ordered one of each on your website, both with trits. I forgot to ask to have them both done with the patina finish.
Auto
Payment received. Please let me know how you want yours patina'ed? Thanks!
Glad to see the interest in this light. I don't recall another one with this sort of engraved relief. Anyone else know of another light with this feature? If you do or have one, do you want to sell? LOL
With so many models and designs out there, sometimes you just got to be innovative and daring....buyers/collectors included.
These are so cool. I love the bas relief aspect.

And only 30. Anyone up for a second run with different carvings? I'm in.
That would be a great idea! First let me get these moved and we can move on to the next project.
 
Top