Sold/Expired Surefire E head Triple Cree XP-G2 Warm White (3000k)

Surefire E head Triple Cree XP-G2 Warm White (3000k)

Surefire E head with triple Cree XP-G2 Warm White 3000k

Surefire E Head with Triple LED modification
Spec.
1. Surefire E head Hard Anodized
2. Triple XP-G2 warm white LEDs
(Slightly off centered led, see beam photos)
3. Carclo 10507 Clear Narrow Optic Lens
4. Linear driver for 1*li-ion battery (Input voltage 2.8v ~ 4.2v)
(Kaidomain.com KD2 v2 driver http://www.kaidomain.com/product/details.S020073)
5. Custom Copper Heatsink
6. Aluminium mcpcb
7. No waterproof due to it is opened
It has many scratches, See photos.

Max current is about 2.7A. This is measured by multimeter and I used Panasonic NCR18650PF 2900mAh unprotected cell. You can get more or less max current depends on your battery.

No water proof!

Tell me your favorite mode option, if not I will send it as default mode.
See http://www.kaidomain.com/Product/PhotoGallery/50581/195077#id=0

This deal is only for head. No battery or E body.

Registered airmail.
If you want Express mail, it costs $30

http://fdna.tistory.com/153

List Date: 1/8/2016

For more info, click here to view the original listing: Surefire E head Triple Cree XP-G2 Warm White (3000k)
--------------------------------------
SOLD $115.00 (shipping is $7)


--------------------------------------

to the top

Do you know the CRI of the led's?
There are a few words at the bottom of the driver specs suggesting there is some sort of built in heat protection?
In LMH setting any idea of lumens of each? I use keep power protected 16650.
Is there a lens over the optic to keep stuff out of head?

Thanks

Maybe this is 90+CRI but I can not sure about it. Just I can tell it is warm white now.
Also I don't know lumen but only knew tailcap current. You can estimate it's lumen by tailcap current and Carclo optic's efficiency.
You can check low and medium tail current at my blog. http://fdna.tistory.com/153

Also there is original Surefire E lens.

recDNA said:

Do you know the CRI of the led's?
There are a few words at the bottom of the driver specs suggesting there is some sort of built in heat protection?
In LMH setting any idea of lumens of each? I use keep power protected 16650.
Is there a lens over the optic to keep stuff out of head?

Thanks

Click to expand...

up to the top

bump to the top

bump to the top